# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License, Version 1.0 only
# (the "License").  You may not use this file except in compliance
# with the License.
#
# You can obtain a copy of the license at legal-notices/CDDLv1_0.txt
# or http://forgerock.org/license/CDDLv1.0.html.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at legal-notices/CDDLv1_0.txt.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information:
#      Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#      Copyright 2006-2009 Sun Microsystems, Inc.



#
# Global directives
#
#global.category=ADMIN

#
# Format string definitions
#
# Keys must be formatted as follows:
#
# [SEVERITY]_[DESCRIPTION]_[ORDINAL]
#
# where:
#
# SEVERITY is one of:
# [ERR, WARN, NOTICE, INFO, DEBUG]
#
# DESCRIPTION is an upper case string providing a hint as to the context of
# the message in upper case with the underscore ('_') character serving as
# word separator
#
# ORDINAL is an integer unique among other ordinals in this file
#
ERR_ADMIN_CANNOT_GET_LISTENER_BASE_1=An error occurred while trying to \
 retrieve relation configuration entry %s: %s
ERR_ADMIN_CANNOT_GET_MANAGED_OBJECT_3=An error occurred while trying \
 to retrieve the managed object configuration entry %s: %s
ERR_ADMIN_MANAGED_OBJECT_DOES_NOT_EXIST_4=The managed object \
 configuration entry %s does not appear to exist in the Directory Server \
 configuration. This is a required entry
ERR_ADMIN_MANAGED_OBJECT_DECODING_PROBLEM_5=An error occurred while \
 trying to decode the managed object configuration entry %s: %s
ERR_ADMIN_CANNOT_INSTANTIATE_CLASS_6=The Directory Server was unable \
 to load class %s and use it to create a component instance as defined in \
 configuration entry %s. The error that occurred was: %s. This component \
 will be disabled
ERR_ADMIN_CANNOT_OPEN_JAR_FILE_9=The Directory Server jar file %s in \
 directory %s cannot be loaded because an unexpected error occurred while \
 trying to open the file for reading: %s
ERR_ADMIN_NO_EXTENSIONS_DIR_12=The extensions directory %s does not \
 exist, therefore no extensions will be loaded
ERR_ADMIN_EXTENSIONS_DIR_NOT_DIRECTORY_13=Unable to read the Directory \
 Server extensions because the extensions directory %s exists but is not a \
 directory
ERR_ADMIN_EXTENSIONS_CANNOT_LIST_FILES_14=Unable to read the Directory \
 Server extensions from directory %s because an unexpected error occurred \
 while trying to list the files in that directory: %s
ERR_ADMIN_CANNOT_FIND_CORE_MANIFEST_15=The core administration manifest \
 file %s cannot be located
ERR_ADMIN_CANNOT_READ_EXTENSION_MANIFEST_17=The administration \
 manifest file %s associated with the extension %s cannot be loaded because an \
 unexpected error occurred while trying to read it: %s
INFO_ADMIN_TOOL_DESCRIPTION_18=This utility can be used to perform operations \
 in the Directory Server administration framework
INFO_ADMIN_SUBCMD_CREATE_GROUP_DESCRIPTION_19=Create a new server group
INFO_ADMIN_ARG_DESCRIPTION_DESCRIPTION_20=The server group description. If \
 not specified, the description will be empty
INFO_ADMIN_SUBCMD_MODIFY_GROUP_DESCRIPTION_21=Modify a server group's \
 properties
INFO_ADMIN_ARG_NEW_DESCRIPTION_DESCRIPTION_22=If specified, the new \
 description
INFO_ADMIN_ARG_NEW_GROUPNAME_DESCRIPTION_23=If specified, the new server \
 group's identifier
INFO_ADMIN_SUBCMD_DELETE_GROUP_DESCRIPTION_24=Delete an existing server group
INFO_ADMIN_SUBCMD_LIST_GROUPS_DESCRIPTION_25=List server groups that have \
 been defined
INFO_ADMIN_SUBCMD_ADD_TO_GROUP_DESCRIPTION_26=Add a server to a server group
INFO_ADMIN_ARG_ADD_MEMBERNAME_DESCRIPTION_27=The server to add. This is a \
 required argument
INFO_ADMIN_SUBCMD_REMOVE_FROM_GROUP_DESCRIPTION_28=Remove a server from a \
 server group
INFO_ADMIN_ARG_REMOVE_MEMBERNAME_DESCRIPTION_29=The server to remove. This is \
 a required argument
INFO_ADMIN_SUBCMD_LIST_MEMBERS_DESCRIPTION_30=List servers of the specified \
 server group
INFO_ADMIN_SUBCMD_LIST_MEMBERSHIP_DESCRIPTION_31=List server groups in which \
 the specified server is a member
ERR_ADMIN_CANNOT_CONNECT_TO_ADS_32=Could not connect to %s. Check that \
 the server is running and that the provided credentials are valid
INFO_ADMIN_SUBCMD_CREATE_ADS_DESCRIPTION_33=Create a new ADS DN
INFO_ADMIN_SUBCMD_DELETE_ADS_DESCRIPTION_34=Delete an existing ADS DN
ERR_ADMIN_MISSING_HOSTNAME_35=The host name is missing
ERR_ADMIN_NOVALID_HOSTNAME_36=The host name is not valid
ERR_ADMIN_MISSING_IPATH_37=The installation path is missing
ERR_ADMIN_NOVALID_IPATH_38=The installation path is not valid
ERR_ADMIN_ACCESS_PERMISSION_39=An access permission error occurs
ERR_ADMIN_ALREADY_REGISTERED_40=The entity is already registered
ERR_ADMIN_BROKEN_INSTALL_41=The administrative repository is broken
ERR_ADMIN_NOT_YET_REGISTERED_42=The entity is not yet registered
ERR_ADMIN_MISSING_PORT_43=The port is missing
ERR_ADMIN_NOVALID_PORT_44=The port is not valid
ERR_ADMIN_MISSING_NAME_45=The name is missing
ERR_ADMIN_MISSING_ADMIN_UID_46=The administration UID is missing
ERR_ADMIN_MISSING_ADMIN_PASSWORD_47=The administrator password is \
 missing
ERR_ADMIN_ERROR_UNEXPECTED_48=An unexpected error occurs
INFO_ADMIN_ERROR_49=[error]
INFO_ADMIN_SUCCESSFUL_50=The operation has been successfully completed
INFO_ADMIN_SUCCESSFUL_NOP_51=The operation has been successfully completed, \
 but no action was required
ERR_ADMIN_NO_MESSAGE_52=
INFO_ADMIN_ARG_CREATE_GROUP_GROUPNAME_DESCRIPTION_53=The new group's \
 identifier. This is a required argument
INFO_ADMIN_ARG_GROUPNAME_DESCRIPTION_54=The group's identifier. This is a \
 required argument
INFO_ADMIN_ARG_MEMBERNAME_DESCRIPTION_55=The member's identifier. This is a \
 required argument
INFO_ADMIN_ARG_BACKENDNAME_DESCRIPTION_56=The name of the backend in which \
 the admin data will be stored
ERR_ADMIN_UNABLE_TO_REGISTER_LISTENER_57=Unable to register an \
 add/delete listener against the entry "%s" because it does not exist in the \
 configuration
INFO_ADMIN_SUBCMD_REGISTER_SERVER_DESCRIPTION_58=Register a server into the \
 administrative domain
INFO_ADMIN_SUBCMD_UNREGISTER_SERVER_DESCRIPTION_59=Unregister a server from \
 the administrative domain
INFO_ADMIN_SUBCMD_LIST_SERVER_PROPS_DESCRIPTION_61=Describes server \
 properties
INFO_ADMIN_SUBCMD_LIST_SERVERS_DESCRIPTION_62=List servers that have been \
 defined
INFO_ADMIN_SUBCMD_GET_SERVER_PROPERTIES_DESCRIPTION_63=Shows server \
 properties
INFO_ADMIN_SUBCMD_SET_SERVER_PROPERTIES_DESCRIPTION_64=Modifies server \
 properties
INFO_ADMIN_ARG_SERVERID_DESCRIPTION_65=The registered server's unique \
 identifier. This is a required argument
ERR_ADMIN_SERVER_NOT_REGISTERED_66=The provided serverId is not \
 registered
INFO_ADMIN_SUBCMD_CREATE_ADMIN_USER_DESCRIPTION_67=Creates a new \
 administrator
INFO_ADMIN_SUBCMD_DELETE_ADMIN_USER_DESCRIPTION_68=Deletes an existing \
 administrator
INFO_ADMIN_SUBCMD_LIST_ADMIN_USER_DESCRIPTION_69=Lists administrators that \
 have been defined
INFO_ADMIN_SUBCMD_GET_ADMIN_USER_PROPERTIES_DESCRIPTION_70=Shows \
 administrator's properties
INFO_ADMIN_SUBCMD_SET_ADMIN_USER_PROPERTIES_DESCRIPTION_71=Modifies \
 administrator's properties
INFO_ADMIN_SUBCMD_LIST_ADMIN_USER_PROPERTIES_DESCRIPTION_72=Describes \
 administrator's properties
INFO_ADMIN_ARG_USERID_DESCRIPTION_73=The administrator's unique identifier. \
 This is a required argument
ERR_OPERATION_REJECTED_DEFAULT_74=Reason unknown
ERR_SERVER_CONSTRAINT_EXCEPTION_75=A configuration exception \
 occurred while evaluating a constraint: %s
ERR_DECODING_EXCEPTION_NO_TYPE_INFO_82=The %s could \
 be found but did not contain any type information (e.g. missing object \
 classes in LDAP)
ERR_DECODING_EXCEPTION_WRONG_TYPE_INFO_83=The %s could \
 be found but did not contain the expected type information (e.g. incorrect \
 object classes in LDAP)
ERR_DECODING_EXCEPTION_ABSTRACT_TYPE_INFO_84=The %s \
 could be found but its type resolved to an abstract managed object \
 definition
ERR_DEFAULT_BEHAVIOR_PROPERTY_EXCEPTION_86=The default values \
 for the "%s" property could not be determined
ERR_ILLEGAL_PROPERTY_VALUE_EXCEPTION_87=The value "%s" is not \
 a valid value for the "%s" property, which must have the following \
 syntax: %s
ERR_ILLEGAL_PROPERTY_VALUE_STRING_EXCEPTION_88=The string value \
 "%s" is not a valid value for the "%s" property, which must have the \
 following syntax: %s
ERR_PROPERTY_IS_MANDATORY_EXCEPTION_89=The "%s" property must be \
 specified as it is mandatory
ERR_PROPERTY_IS_READ_ONLY_EXCEPTION_90=The "%s" property must not \
 be modified as it is read-only
ERR_PROPERTY_IS_SINGLE_VALUED_EXCEPTION_91=The "%s" property \
 must not contain more than one value
ERR_UNKNOWN_PROPERTY_DEFINITION_EXCEPTION_92=An internal error \
 occurred while processing property "%s": unknown property type "%s"
ERR_AUTHENTICATION_EXCEPTION_DEFAULT_93=Authentication failure
ERR_AUTHENTICATION_NOT_SUPPORTED_EXCEPTION_DEFAULT_94=The \
 requested authentication mechanism is not supported by the server
ERR_AUTHORIZATION_EXCEPTION_DEFAULT_95=Authorization failure
ERR_COMMUNICATION_EXCEPTION_DEFAULT_96=A communication problem \
 occurred while contacting the server
ERR_OPERATION_REJECTED_EXCEPTION_SINGLE_97=The operation was rejected \
 for the following reason: %s
ERR_OPERATION_REJECTED_EXCEPTION_PLURAL_98=The operation was rejected \
 for the following reasons: %s
ERR_CONCURRENT_MODIFICATION_EXCEPTION_DEFAULT_99=The operation could \
 not be performed because a conflicting change has already occurred. There \
 may be another client administration tool in use
ERR_MANAGED_OBJECT_DECODING_EXCEPTION_SINGLE_100=The %s could not \
 be decoded due to the following reason: %s
ERR_MANAGED_OBJECT_DECODING_EXCEPTION_PLURAL_101=The %s could not \
 be decoded due to the following reasons: %s
ERR_ILLEGAL_MANAGED_OBJECT_NAME_EXCEPTION_EMPTY_102=Empty managed \
 object names are not permitted
ERR_ILLEGAL_MANAGED_OBJECT_NAME_EXCEPTION_BLANK_103=Blank managed \
 object names are not permitted
ERR_ILLEGAL_MANAGED_OBJECT_NAME_EXCEPTION_SYNTAX_104=The managed \
 object name "%s" is not a valid value for the naming property "%s", \
 which must have the following syntax: %s
ERR_ILLEGAL_MANAGED_OBJECT_NAME_EXCEPTION_OTHER_105=The managed \
 object name "%s" is not permitted
ERR_MANAGED_OBJECT_ALREADY_EXISTS_EXCEPTION_106=The managed object \
 could not be created because there is an existing managed object with \
 the same name
ERR_MANAGED_OBJECT_NOT_FOUND_EXCEPTION_107=The requested managed \
 object could not be found
ERR_MISSING_MANDATORY_PROPERTIES_EXCEPTION_SINGLE_108=The "%s" \
 property is mandatory
ERR_MISSING_MANDATORY_PROPERTIES_EXCEPTION_PLURAL_109=The following \
 properties are mandatory: %s
ERR_PROPERTY_NOT_FOUND_EXCEPTION_110=The property "%s" was not \
 recognized
ERR_COMMUNICATION_EXCEPTION_DEFAULT_CAUSE_111=A communication problem \
 occurred while contacting the server: %s
ERR_CONSTRAINT_VIOLATION_EXCEPTION_SINGLE_112=The following \
 constraint violation occurred: %s
ERR_CONSTRAINT_VIOLATION_EXCEPTION_PLURAL_113=The following \
 constraint violations occurred: %s
ERR_SERVER_REFINT_DANGLING_REFERENCE_114=The value "%s" in \
 property "%s" in the %s in entry "%s" refers to a non-existent %s \
 in entry "%s"
ERR_SERVER_REFINT_TARGET_DISABLED_116=The value "%s" in \
 property "%s" in the %s in entry "%s" refers to a disabled %s in \
 entry "%s"
ERR_SERVER_REFINT_CANNOT_DELETE_117=The %s in entry "%s" \
 cannot be deleted because it is referenced by the "%s" property \
 of the %s in entry "%s"
ERR_SERVER_REFINT_CANNOT_DISABLE_118=The %s in entry "%s" \
 cannot be disabled because it is referenced by the "%s" property \
 of the %s in entry "%s"
ERR_CLASS_LOADER_CANNOT_READ_MANIFEST_FILE_120=An unexpected \
 error occurred while reading the manifest file: %s
ERR_CLASS_LOADER_CANNOT_LOAD_CLASS_121=An error occurred while \
 attempting to load class "%s": %s
ERR_CLASS_LOADER_CANNOT_FIND_GET_INSTANCE_METHOD_122=Unable to \
 to find the getInstance() method in the managed object definition \
 class "%s": %s
ERR_CLASS_LOADER_CANNOT_INVOKE_GET_INSTANCE_METHOD_123=Unable to \
 to invoke the getInstance() method in the managed object definition \
 class "%s": %s
ERR_CLASS_LOADER_CANNOT_INITIALIZE_DEFN_124=Unable initialize the \
 "%s" managed object definition in class "%s": %s
ERR_CLASS_LOADER_CANNOT_LOAD_EXTENSION_125=The extension "%s" \
 with manifest file %s cannot be loaded because an unexpected error \
 occurred while trying to initialize it: %s
ERR_CLASS_LOADER_CANNOT_LOAD_CORE_126=The core administration \
 classes could not be loaded from manifest file %s because an unexpected \
 error occurred: %s
ERR_CLIENT_REFINT_TARGET_DANGLING_REFERENCE_127=The %s "%s" referenced in \
 property "%s" does not exist
ERR_CLIENT_REFINT_TARGET_INVALID_128=The %s "%s" referenced in \
 property "%s" exists but has an invalid configuration: %s
ERR_CLIENT_REFINT_TARGET_DISABLED_129=The %s "%s" referenced in \
 property "%s" is disabled
ERR_CLIENT_REFINT_CANNOT_DELETE_WITH_NAME_130=The "%s" property \
 in the %s called "%s" references this %s
ERR_CLIENT_REFINT_CANNOT_DELETE_WITHOUT_NAME_131=The "%s" property \
 in the %s references this %s
ERR_CLIENT_REFINT_CANNOT_DISABLE_WITH_NAME_132=This %s cannot be \
 disabled because it is referenced by the "%s" property in the %s called "%s"
ERR_CLIENT_REFINT_CANNOT_DISABLE_WITHOUT_NAME_133=This %s cannot be \
 disabled because it is referenced by the "%s" property in the %s
ERR_REFINT_UNABLE_TO_EVALUATE_TARGET_CONDITION_134=An error occurred \
 while attempting to determine if the %s in entry %s is enabled: %s
ERR_ADMIN_CERTIFICATE_GENERATION_135=The administration connector \
self-signed certificate cannot be generated because the following error \
occurred: %s
ERR_ADMIN_CERTIFICATE_GENERATION_MISSING_FILES_136=The administration \
connector self-signed certificate cannot be generated because the following \
files are missing: %s
WARN_ADMIN_SET_PERMISSIONS_FAILED_137=Failed to set permissions \
 on file %s
ERR_ADMIN_MERGING_138=The registry information of the servers could not \
 be merged

