# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License, Version 1.0 only
# (the "License").  You may not use this file except in compliance
# with the License.
#
# You can obtain a copy of the license at legal-notices/CDDLv1_0.txt
# or http://forgerock.org/license/CDDLv1.0.html.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at legal-notices/CDDLv1_0.txt.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information:
#      Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#      Copyright 2006-2010 Sun Microsystems, Inc.
#      Portions Copyright 2011-2015 ForgeRock AS.



#
# Global directives
#
#global.category=TOOLS

#
# Format string definitions
#
# Keys must be formatted as follows:
#
# [SEVERITY]_[DESCRIPTION]_[ORDINAL]
#
# where:
#
# SEVERITY is one of:
# [ERR, WARN, NOTICE, INFO, DEBUG]
#
# DESCRIPTION is an upper case string providing a hint as to the context of
# the message in upper case with the underscore ('_') character serving as
# word separator
#
# ORDINAL is an integer unique among other ordinals in this file
#
ERR_TOOLS_CANNOT_CREATE_SSL_CONNECTION_1=Unable to create an SSL \
 connection to the server: %s
ERR_TOOLS_SSL_CONNECTION_NOT_INITIALIZED_2=Unable to create an SSL \
 connection to the server because the connection factory has not been \
 initialized
ERR_TOOLS_CANNOT_LOAD_KEYSTORE_FILE_3=Cannot load the key store file: \
 %s
ERR_TOOLS_CANNOT_INIT_KEYMANAGER_4=Cannot initialize the key manager \
 for the key store:%s
ERR_TOOLS_CANNOT_LOAD_TRUSTSTORE_FILE_5=Cannot load the key store \
 file: %s
ERR_TOOLS_CANNOT_INIT_TRUSTMANAGER_6=Cannot initialize the key manager \
 for the key store:%s
INFO_ENCPW_DESCRIPTION_LISTSCHEMES_7=List available password storage schemes
INFO_ENCPW_DESCRIPTION_CLEAR_PW_8=Clear-text password to encode or to compare \
 against an encoded password
INFO_ENCPW_DESCRIPTION_CLEAR_PW_FILE_9=Clear-text password file
INFO_ENCPW_DESCRIPTION_ENCODED_PW_10=Encoded password to compare against the \
 clear-text password
INFO_ENCPW_DESCRIPTION_ENCODED_PW_FILE_11=Encoded password file
INFO_DESCRIPTION_CONFIG_CLASS_12=The fully-qualified name of the Java class \
 to use as the Directory Server configuration handler.  If this is not \
 provided, then a default of org.opends.server.extensions.ConfigFileHandler \
 will be used
INFO_DESCRIPTION_CONFIG_FILE_13=Path to the Directory Server \
 configuration file
INFO_ENCPW_DESCRIPTION_SCHEME_14=Scheme to use for the encoded password
INFO_DESCRIPTION_USAGE_15=Displays this usage information
ERR_CANNOT_INITIALIZE_ARGS_16=An unexpected error occurred while \
 attempting to initialize the command-line arguments:  %s
ERR_ERROR_PARSING_ARGS_17=An error occurred while parsing the \
 command-line arguments:  %s
ERR_ENCPW_NO_CLEAR_PW_18=No clear-text password was specified.  Use \
 --%s, --%s or --%s to specify the password to encode
ERR_ENCPW_NO_SCHEME_19=No password storage scheme was specified.  Use \
 the --%s argument to specify the storage scheme
ERR_SERVER_BOOTSTRAP_ERROR_20=An unexpected error occurred while \
 attempting to bootstrap the Directory Server client-side code:  %s
ERR_CANNOT_LOAD_CONFIG_21=An error occurred while trying to load the \
 Directory Server configuration:  %s
ERR_CANNOT_LOAD_SCHEMA_22=An error occurred while trying to load the \
 Directory Server schema:  %s
ERR_CANNOT_INITIALIZE_CORE_CONFIG_23=An error occurred while trying to \
 initialize the core Directory Server configuration:  %s
ERR_ENCPW_CANNOT_INITIALIZE_STORAGE_SCHEMES_24=An error occurred while \
 trying to initialize the Directory Server password storage schemes:  %s
ERR_ENCPW_NO_STORAGE_SCHEMES_25=No password storage schemes have been \
 configured for use in the Directory Server
ERR_ENCPW_NO_SUCH_SCHEME_26=Password storage scheme "%s" is not \
 configured for use in the Directory Server
INFO_ENCPW_PASSWORDS_MATCH_27=The provided clear-text and encoded passwords \
 match
INFO_ENCPW_PASSWORDS_DO_NOT_MATCH_28=The provided clear-text and encoded \
 passwords do not match
ERR_ENCPW_ENCODED_PASSWORD_29=Encoded Password:  "%s"
ERR_ENCPW_CANNOT_ENCODE_30=An error occurred while attempting to \
 encode the clear-text password:  %s
INFO_LDIFEXPORT_DESCRIPTION_LDIF_FILE_33=Path to the LDIF file to be written
INFO_LDIFEXPORT_DESCRIPTION_APPEND_TO_LDIF_34=Append an existing LDIF file \
 rather than overwriting it
INFO_LDIFEXPORT_DESCRIPTION_BACKEND_ID_35=Backend ID for the backend to \
 export
INFO_LDIFEXPORT_DESCRIPTION_EXCLUDE_BRANCH_36=Base DN of a branch to exclude \
 from the LDIF export
INFO_LDIFEXPORT_DESCRIPTION_INCLUDE_ATTRIBUTE_37=Attribute to include in the \
 LDIF export
INFO_LDIFEXPORT_DESCRIPTION_EXCLUDE_ATTRIBUTE_38=Attribute to exclude from \
 the LDIF export
INFO_LDIFEXPORT_DESCRIPTION_INCLUDE_FILTER_39=Filter to identify entries to \
 include in the LDIF export
INFO_LDIFEXPORT_DESCRIPTION_EXCLUDE_FILTER_40=Filter to identify entries to \
 exclude from the LDIF export
INFO_LDIFEXPORT_DESCRIPTION_WRAP_COLUMN_41=Column at which to wrap long lines \
 (0 for no wrapping)
INFO_LDIFEXPORT_DESCRIPTION_COMPRESS_LDIF_42=Compress the LDIF data as it is \
 exported
INFO_LDIFEXPORT_DESCRIPTION_ENCRYPT_LDIF_43=Encrypt the LDIF data as it is \
 exported
INFO_LDIFEXPORT_DESCRIPTION_SIGN_HASH_44=Generate a signed hash of the export \
 data
ERR_LDIFEXPORT_CANNOT_PARSE_EXCLUDE_FILTER_52=Unable to decode exclude \
 filter string "%s" as a valid search filter:  %s
ERR_LDIFEXPORT_CANNOT_PARSE_INCLUDE_FILTER_53=Unable to decode include \
 filter string "%s" as a valid search filter:  %s
ERR_CANNOT_DECODE_BASE_DN_54=Unable to decode base DN string "%s" as a \
 valid distinguished name:  %s
ERR_LDIFEXPORT_MULTIPLE_BACKENDS_FOR_ID_55=Multiple Directory Server \
 backends are configured with the requested backend ID "%s"
ERR_LDIFEXPORT_NO_BACKENDS_FOR_ID_56=None of the Directory Server \
 backends are configured with the requested backend ID "%s"
ERR_LDIFEXPORT_CANNOT_DECODE_EXCLUDE_BASE_57=Unable to decode exclude \
 branch string "%s" as a valid distinguished name:  %s
ERR_LDIFEXPORT_CANNOT_DECODE_WRAP_COLUMN_AS_INTEGER_58=Unable to \
 decode wrap column value "%s" as an integer
ERR_LDIFEXPORT_ERROR_DURING_EXPORT_59=An error occurred while \
 attempting to process the LDIF export:  %s
ERR_CANNOT_DECODE_BACKEND_BASE_DN_60=Unable to decode the backend \
 configuration base DN string "%s" as a valid DN:  %s
ERR_CANNOT_RETRIEVE_BACKEND_BASE_ENTRY_61=Unable to retrieve the \
 backend configuration base entry "%s" from the server configuration:  %s
ERR_CANNOT_DETERMINE_BACKEND_CLASS_62=Cannot determine the name of the \
 Java class providing the logic for the backend defined in configuration entry \
 %s:  %s
ERR_CANNOT_LOAD_BACKEND_CLASS_63=Unable to load class %s referenced in \
 configuration entry %s for use as a Directory Server backend:  %s
ERR_CANNOT_INSTANTIATE_BACKEND_CLASS_64=Unable to create an instance \
 of class %s referenced in configuration entry %s as a Directory Server \
 backend:  %s
ERR_NO_BASES_FOR_BACKEND_65=No base DNs have been defined in backend \
 configuration entry %s.  This backend will not be evaluated
ERR_CANNOT_DETERMINE_BASES_FOR_BACKEND_66=Unable to determine the set \
 of base DNs defined in backend configuration entry %s:  %s
INFO_LDIFIMPORT_DESCRIPTION_LDIF_FILE_69=Path to the LDIF file to be imported
INFO_LDIFIMPORT_DESCRIPTION_APPEND_70=Append to an existing database rather \
 than overwriting it
INFO_LDIFIMPORT_DESCRIPTION_REPLACE_EXISTING_71=Replace existing entries when \
 appending to the database
INFO_LDIFIMPORT_DESCRIPTION_BACKEND_ID_72=Backend ID for the backend to \
 import
INFO_LDIFIMPORT_DESCRIPTION_EXCLUDE_BRANCH_73=Base DN of a branch to exclude \
 from the LDIF import
INFO_LDIFIMPORT_DESCRIPTION_INCLUDE_ATTRIBUTE_74=Attribute to include in the \
 LDIF import
INFO_LDIFIMPORT_DESCRIPTION_EXCLUDE_ATTRIBUTE_75=Attribute to exclude from \
 the LDIF import
INFO_LDIFIMPORT_DESCRIPTION_INCLUDE_FILTER_76=Filter to identify entries to \
 include in the LDIF import
INFO_LDIFIMPORT_DESCRIPTION_EXCLUDE_FILTER_77=Filter to identify entries to \
 exclude from the LDIF import
INFO_LDIFIMPORT_DESCRIPTION_REJECT_FILE_78=Write rejected entries to the \
 specified file
INFO_LDIFIMPORT_DESCRIPTION_OVERWRITE_79=Overwrite an existing rejects and/or \
 skip file rather than appending to it
INFO_LDIFIMPORT_DESCRIPTION_IS_COMPRESSED_80=LDIF file is compressed
INFO_LDIFIMPORT_DESCRIPTION_IS_ENCRYPTED_81=LDIF file is encrypted
ERR_LDIFIMPORT_CANNOT_PARSE_EXCLUDE_FILTER_89=Unable to decode exclude \
 filter string "%s" as a valid search filter:  %s
ERR_LDIFIMPORT_CANNOT_PARSE_INCLUDE_FILTER_90=Unable to decode include \
 filter string "%s" as a valid search filter:  %s
ERR_LDIFIMPORT_MULTIPLE_BACKENDS_FOR_ID_92=Imported branches or \
 backend IDs can not span across multiple Directory Server backends
ERR_LDIFIMPORT_NO_BACKENDS_FOR_ID_93=None of the Directory Server \
 backends are configured with the requested backend ID or base DNs that \
 include the specified branches
ERR_LDIFIMPORT_CANNOT_DECODE_EXCLUDE_BASE_94=Unable to decode exclude \
 branch string "%s" as a valid distinguished name:  %s
ERR_LDIFIMPORT_CANNOT_OPEN_REJECTS_FILE_95=An error occurred while \
 trying to open the rejects file %s for writing:  %s
ERR_LDIFIMPORT_ERROR_DURING_IMPORT_96=An error occurred while \
 attempting to process the LDIF import:  %s
ERR_LDIFIMPORT_ERROR_CONSTRAINT_VIOLATION_97=One or more DN \
indexes could not be built due to invalid DNs or missing parent entries. \
Please re-import the data without the --skipDNValidation option in order \
to determine the exact cause
INFO_PROCESSING_OPERATION_104=Processing %s request for %s
INFO_OPERATION_FAILED_105=%s operation failed
INFO_OPERATION_SUCCESSFUL_106=%s operation successful for DN %s
INFO_PROCESSING_COMPARE_OPERATION_107=Comparing type %s with value %s in \
 entry %s
INFO_COMPARE_OPERATION_RESULT_FALSE_108=Compare operation returned false for \
 entry %s
INFO_COMPARE_OPERATION_RESULT_TRUE_109=Compare operation returned true for \
 entry %s
INFO_SEARCH_OPERATION_INVALID_PROTOCOL_110=Invalid operation type returned in \
 search result %s
INFO_DESCRIPTION_TRUSTALL_111=Trust all server SSL certificates
INFO_DESCRIPTION_BINDDN_112=DN to use to bind to the server
INFO_DESCRIPTION_BINDPASSWORD_113=Password to use to bind to \
 the server
INFO_DESCRIPTION_BINDPASSWORDFILE_114=Bind password file
INFO_DESCRIPTION_ENCODING_115=Use the specified character set for \
 command-line input
INFO_DESCRIPTION_VERBOSE_116=Use verbose mode
INFO_DESCRIPTION_KEYSTOREPATH_117=Certificate key store path
INFO_DESCRIPTION_TRUSTSTOREPATH_118=Certificate trust store path
INFO_DESCRIPTION_KEYSTOREPASSWORD_119=Certificate key store PIN
INFO_DESCRIPTION_HOST_120=Directory server hostname or IP address
INFO_DESCRIPTION_PORT_121=Directory server port number
INFO_DESCRIPTION_SHOWUSAGE_122=Display this usage information
INFO_DESCRIPTION_CONTROLS_123=Use a request control with the provided \
 information
INFO_DESCRIPTION_CONTINUE_ON_ERROR_124=Continue processing even if there are \
 errors
INFO_DESCRIPTION_USE_SSL_125=Use SSL for secure communication with the server
INFO_DESCRIPTION_START_TLS_126=Use StartTLS to secure communication with the \
 server
INFO_DESCRIPTION_USE_SASL_EXTERNAL_127=Use the SASL EXTERNAL authentication \
 mechanism
INFO_DELETE_DESCRIPTION_FILENAME_128=File containing the DNs of the entries \
 to delete
INFO_DELETE_DESCRIPTION_DELETE_SUBTREE_129=Delete the specified entry and all \
 entries below it
INFO_MODIFY_DESCRIPTION_DEFAULT_ADD_130=Treat records with no changetype as \
 add operations
INFO_SEARCH_DESCRIPTION_BASEDN_131=Search base DN
INFO_SEARCH_DESCRIPTION_SIZE_LIMIT_132=Maximum number of entries to return \
 from the search
INFO_SEARCH_DESCRIPTION_TIME_LIMIT_133=Maximum length of time in seconds to \
 allow for the search
INFO_SEARCH_DESCRIPTION_SEARCH_SCOPE_134=Search scope ('base', 'one', 'sub', \
 or 'subordinate'). Note: 'subordinate' is an LDAP extension \
 that might not work with all LDAP servers
INFO_SEARCH_DESCRIPTION_DEREFERENCE_POLICY_135=Alias dereference policy \
 ('never', 'always', 'search', or 'find')
ERR_LDAPAUTH_CANNOT_SEND_SIMPLE_BIND_136=Cannot send the simple bind \
 request:  %s
ERR_LDAPAUTH_CANNOT_READ_BIND_RESPONSE_137=Cannot read the bind \
 response from the server. The port you are using may require a secured \
communication (--useSSL). %s
ERR_LDAPAUTH_SERVER_DISCONNECT_138=The Directory Server indicated that \
 it was closing the connection to the client (result code %d, message "%s"
ERR_LDAPAUTH_UNEXPECTED_EXTENDED_RESPONSE_139=The Directory Server \
 sent an unexpected extended response message to the client:  %s
ERR_LDAPAUTH_UNEXPECTED_RESPONSE_140=The Directory Server sent an \
 unexpected response message to the client:  %s
ERR_LDAPAUTH_SIMPLE_BIND_FAILED_141=The simple bind attempt failed
ERR_LDAPAUTH_NO_SASL_MECHANISM_142=A SASL bind was requested but no \
 SASL mechanism was specified
ERR_LDAPAUTH_UNSUPPORTED_SASL_MECHANISM_143=The requested SASL mechanism \
 "%s" is not supported by this client
ERR_LDAPAUTH_TRACE_SINGLE_VALUED_144=The trace SASL property may only be \
 given a single value
ERR_LDAPAUTH_INVALID_SASL_PROPERTY_145=Property "%s" is not allowed for \
 the %s SASL mechanism
ERR_LDAPAUTH_CANNOT_SEND_SASL_BIND_146=Cannot send the SASL %S bind \
 request:  %s
ERR_LDAPAUTH_SASL_BIND_FAILED_147=The SASL %s bind attempt failed
ERR_LDAPAUTH_NO_SASL_PROPERTIES_148=No SASL properties were provided for \
 use with the %s mechanism
ERR_LDAPAUTH_AUTHID_SINGLE_VALUED_149=The "authid" SASL property only \
 accepts a single value
ERR_LDAPAUTH_SASL_AUTHID_REQUIRED_150=The "authid" SASL property is \
 required for use with the %s mechanism
ERR_LDAPAUTH_CANNOT_SEND_INITIAL_SASL_BIND_151=Cannot send the initial \
 bind request in the multi-stage %s bind to the server:  %s
ERR_LDAPAUTH_CANNOT_READ_INITIAL_BIND_RESPONSE_152=Cannot read the \
 initial %s bind response from the server:  %s
ERR_LDAPAUTH_UNEXPECTED_INITIAL_BIND_RESPONSE_153=The client received an \
 unexpected intermediate bind response.  The "SASL bind in progress" result \
 was expected for the first response in the multi-stage %s bind process, but \
 the bind response had a result code of %d (%s) and an error message of "%s"
ERR_LDAPAUTH_NO_CRAMMD5_SERVER_CREDENTIALS_154=The initial bind response \
 from the server did not include any server SASL credentials containing the \
 challenge information needed to complete the CRAM-MD5 authentication
ERR_LDAPAUTH_CANNOT_INITIALIZE_MD5_DIGEST_155=An unexpected error \
 occurred while trying to initialize the MD5 digest generator:  %s
ERR_LDAPAUTH_CANNOT_SEND_SECOND_SASL_BIND_156=Cannot send the second \
 bind request in the multi-stage %s bind to the server:  %s
ERR_LDAPAUTH_CANNOT_READ_SECOND_BIND_RESPONSE_157=Cannot read the second \
 %s bind response from the server:  %s
ERR_LDAPAUTH_NO_ALLOWED_SASL_PROPERTIES_158=One or more SASL properties \
 were provided, but the %s mechanism does not take any SASL properties
ERR_LDAPAUTH_AUTHZID_SINGLE_VALUED_159=The "authzid" SASL property only \
 accepts a single value
ERR_LDAPAUTH_REALM_SINGLE_VALUED_160=The "realm" SASL property only \
 accepts a single value
ERR_LDAPAUTH_QOP_SINGLE_VALUED_161=The "qop" SASL property only accepts \
 a single value
ERR_LDAPAUTH_DIGESTMD5_QOP_NOT_SUPPORTED_162=The "%s" QoP mode is not \
 supported by this client.  Only the "auth" mode is currently available for \
 use
ERR_LDAPAUTH_DIGESTMD5_INVALID_QOP_163=The specified DIGEST-MD5 quality \
 of protection mode "%s" is not valid.  The only QoP mode currently supported \
 is "auth"
ERR_LDAPAUTH_DIGEST_URI_SINGLE_VALUED_164=The "digest-uri" SASL property \
 only accepts a single value
ERR_LDAPAUTH_NO_DIGESTMD5_SERVER_CREDENTIALS_165=The initial bind \
 response from the server did not include any server SASL credentials \
 containing the challenge information needed to complete the DIGEST-MD5 \
 authentication
ERR_LDAPAUTH_DIGESTMD5_INVALID_TOKEN_IN_CREDENTIALS_166=The DIGEST-MD5 \
 credentials provided by the server contained an invalid token of "%s" \
 starting at position %d
ERR_LDAPAUTH_DIGESTMD5_INVALID_CHARSET_167=The DIGEST-MD5 credentials \
 provided by the server specified the use of the "%s" character set.  The \
 character set that may be specified in the DIGEST-MD5 credentials is "utf-8"
ERR_LDAPAUTH_REQUESTED_QOP_NOT_SUPPORTED_BY_SERVER_168=The requested QoP \
 mode of "%s" is not listed as supported by the Directory Server.  The \
 Directory Server's list of supported QoP modes is:  "%s"
ERR_LDAPAUTH_DIGESTMD5_NO_NONCE_169=The server SASL credentials provided \
 in response to the initial DIGEST-MD5 bind request did not include the nonce \
 to use to generate the authentication digests
ERR_LDAPAUTH_DIGESTMD5_CANNOT_CREATE_RESPONSE_DIGEST_170=An error \
 occurred while attempting to generate the response digest for the DIGEST-MD5 \
 bind request:  %s
ERR_LDAPAUTH_DIGESTMD5_NO_RSPAUTH_CREDS_171=The DIGEST-MD5 bind response \
 from the server did not include the "rspauth" element to provide a digest of \
 the response authentication information
ERR_LDAPAUTH_DIGESTMD5_COULD_NOT_DECODE_RSPAUTH_172=An error occurred \
 while trying to decode the rspauth element of the DIGEST-MD5 bind response \
 from the server as a hexadecimal string:  %s
ERR_LDAPAUTH_DIGESTMD5_COULD_NOT_CALCULATE_RSPAUTH_173=An error occurred \
 while trying to calculate the expected rspauth element to compare against the \
 value included in the DIGEST-MD5 response from the server:  %s
ERR_LDAPAUTH_DIGESTMD5_RSPAUTH_MISMATCH_174=The rpsauth element included \
 in the DIGEST-MD5 bind response from the Directory Server was different from \
 the expected value calculated by the client
ERR_LDAPAUTH_DIGESTMD5_INVALID_CLOSING_QUOTE_POS_175=The DIGEST-MD5 \
 response challenge could not be parsed because it had an invalid quotation \
 mark at position %d
INFO_LDAPAUTH_PROPERTY_DESCRIPTION_TRACE_176=Text string that may be written \
 to the Directory Server error log as trace information for the bind
INFO_LDAPAUTH_PROPERTY_DESCRIPTION_AUTHID_177=Authentication ID for the bind
INFO_LDAPAUTH_PROPERTY_DESCRIPTION_REALM_178=Realm into which \
 the authentication is to be performed
INFO_LDAPAUTH_PROPERTY_DESCRIPTION_QOP_179=Quality of \
 protection to use for the bind
INFO_LDAPAUTH_PROPERTY_DESCRIPTION_DIGEST_URI_180=Digest URI to \
 use for the bind
INFO_LDAPAUTH_PROPERTY_DESCRIPTION_AUTHZID_181=Authorization ID \
 to use for the bind
INFO_DESCRIPTION_SASL_PROPERTIES_182=SASL bind options
INFO_LDAPAUTH_PROPERTY_DESCRIPTION_KDC_183=KDC to use for the \
 Kerberos authentication
ERR_LDAPAUTH_KDC_SINGLE_VALUED_184=The "kdc" SASL property only accepts \
 a single value
ERR_LDAPAUTH_GSSAPI_INVALID_QOP_185=The specified GSSAPI quality of \
 protection mode "%s" is not valid.  The only QoP mode currently supported is \
 "auth"
ERR_LDAPAUTH_GSSAPI_CANNOT_CREATE_JAAS_CONFIG_186=An error occurred \
 while trying to create the temporary JAAS configuration for GSSAPI \
 authentication:  %s
ERR_LDAPAUTH_GSSAPI_LOCAL_AUTHENTICATION_FAILED_187=An error occurred \
 while attempting to perform local authentication to the Kerberos realm:  %s
ERR_LDAPAUTH_GSSAPI_REMOTE_AUTHENTICATION_FAILED_188=An error occurred \
 while attempting to perform GSSAPI authentication to the Directory Server: \
 %s
ERR_LDAPAUTH_NONSASL_RUN_INVOCATION_189=The \
 LDAPAuthenticationHandler.run() method was called for a non-SASL bind.  The \
 backtrace for this call is %s
ERR_LDAPAUTH_UNEXPECTED_RUN_INVOCATION_190=The \
 LDAPAuthenticationHandler.run() method was called for a SASL bind with an \
 unexpected mechanism of "%s".  The backtrace for this call is %s
ERR_LDAPAUTH_GSSAPI_CANNOT_CREATE_SASL_CLIENT_191=An error occurred \
 while attempting to create a SASL client to process the GSSAPI \
 authentication:  %s
ERR_LDAPAUTH_GSSAPI_CANNOT_CREATE_INITIAL_CHALLENGE_192=An error \
 occurred while attempting to create the initial challenge for GSSAPI \
 authentication:  %s
ERR_LDAPAUTH_GSSAPI_CANNOT_VALIDATE_SERVER_CREDS_193=An error occurred \
 while trying to validate the SASL credentials provided by the Directory \
 Server in the GSSAPI bind response:  %s
ERR_LDAPAUTH_GSSAPI_UNEXPECTED_SUCCESS_RESPONSE_194=The Directory Server \
 unexpectedly returned a success response to the client even though the client \
 does not believe that the GSSAPI negotiation is complete
ERR_LDAPAUTH_GSSAPI_BIND_FAILED_195=The GSSAPI bind attempt failed
ERR_LDAPAUTH_NONSASL_CALLBACK_INVOCATION_196=The \
 LDAPAuthenticationHandler.handle() method was called for a non-SASL bind. \
 The backtrace for this call is %s
ERR_LDAPAUTH_UNEXPECTED_GSSAPI_CALLBACK_197=The \
 LDAPAuthenticationHandler.handle() method was called during a GSSAPI bind \
 attempt with an unexpected callback type of %s
ERR_LDAPAUTH_UNEXPECTED_CALLBACK_INVOCATION_198=The \
 LDAPAuthenticationHandler.handle() method was called for an unexpected SASL \
 mechanism of %s.  The backtrace for this call is %s
INFO_LDAPAUTH_PASSWORD_PROMPT_199=Password for user '%s':
INFO_DESCRIPTION_VERSION_200=LDAP protocol version number
ERR_DESCRIPTION_INVALID_VERSION_201=Invalid LDAP version number '%s'. \
 Allowed values are 2 and 3
ERR_LDAPAUTH_CANNOT_SEND_WHOAMI_REQUEST_202=Cannot send the 'Who Am \
 I?' request to the Directory Server:  %s
ERR_LDAPAUTH_CANNOT_READ_WHOAMI_RESPONSE_203=Cannot read the 'Who Am \
 I?' response from the Directory Server:  %s
ERR_LDAPAUTH_WHOAMI_FAILED_204=The 'Who Am I?' request was rejected by \
 the Directory Server
ERR_SEARCH_INVALID_SEARCH_SCOPE_205=Invalid scope '%s' specified for \
 the search request
ERR_SEARCH_NO_FILTERS_206=No filters specified for the search request
INFO_VERIFYINDEX_DESCRIPTION_BASE_DN_207=Base DN of a backend \
 supporting indexing. Verification is performed on indexes within the scope of \
 the given base DN
INFO_VERIFYINDEX_DESCRIPTION_INDEX_NAME_208=Name of an index to \
 be verified. For an attribute index this is simply an attribute name. \
 Multiple indexes may be verified for completeness, or all indexes if no \
 indexes are specified.  An index is complete if each index value references \
 all entries containing that value
INFO_VERIFYINDEX_DESCRIPTION_VERIFY_CLEAN_209=Specifies that a single index \
 should be verified to ensure it is clean.  An index is clean if each index \
 value references only entries containing that value.  Only one index at a \
 time may be verified in this way
ERR_VERIFYINDEX_ERROR_DURING_VERIFY_210=An error occurred while \
 attempting to perform index verification:  %s
ERR_VERIFYINDEX_VERIFY_CLEAN_REQUIRES_SINGLE_INDEX_211=Only one index \
 at a time may be verified for cleanliness
ERR_BACKEND_NO_INDEXING_SUPPORT_212=The backend does not support \
 indexing
ERR_LDIFEXPORT_CANNOT_EXPORT_BACKEND_213=The Directory Server backend \
 with backend ID "%s" does not provide a mechanism for performing LDIF exports
ERR_LDIFIMPORT_CANNOT_IMPORT_214=The Directory Server backend with \
 backend ID %s does not provide a mechanism for performing LDIF imports
INFO_DESCRIPTION_DONT_WRAP_215=Do not wrap long lines
INFO_LDIFIMPORT_DESCRIPTION_INCLUDE_BRANCH_216=Base DN of a branch to include \
 in the LDIF import
ERR_CANNOT_DETERMINE_BACKEND_ID_217=Cannot determine the backend ID \
 for the backend defined in configuration entry %s:  %s
ERR_LDIFIMPORT_CANNOT_DECODE_INCLUDE_BASE_218=Unable to decode include \
 branch string "%s" as a valid distinguished name:  %s
ERR_LDIFIMPORT_INVALID_INCLUDE_BASE_219=Provided include base DN "%s" \
 is not handled by the backend with backend ID %s
ERR_MULTIPLE_BACKENDS_FOR_BASE_230=Multiple Directory Server backends \
 are configured to support base DN "%s"
ERR_NO_BACKENDS_FOR_BASE_231=None of the Directory Server backends are \
 configured to support the requested base DN "%s"
INFO_LDIFEXPORT_DESCRIPTION_INCLUDE_BRANCH_240=Base DN of a branch to include \
 in the LDIF export
ERR_LDIFEXPORT_INVALID_INCLUDE_BASE_242=Provided include base DN "%s" \
 is not handled by the backend with backend ID %s
INFO_BACKUPDB_DESCRIPTION_BACKEND_ID_245=Backend ID for the backend to \
 archive
INFO_BACKUPDB_DESCRIPTION_BACKUP_ID_246=Use the provided identifier for the \
 backup
INFO_BACKUPDB_DESCRIPTION_BACKUP_DIR_247=Path to the target directory for the \
 backup file(s)
INFO_BACKUPDB_DESCRIPTION_INCREMENTAL_248=Perform an incremental backup \
 rather than a full backup
INFO_BACKUPDB_DESCRIPTION_COMPRESS_249=Compress the backup contents
INFO_BACKUPDB_DESCRIPTION_ENCRYPT_250=Encrypt the backup contents
INFO_BACKUPDB_DESCRIPTION_HASH_251=Generate a hash of the backup contents
INFO_BACKUPDB_DESCRIPTION_SIGN_HASH_252=Sign the hash of the backup contents
ERR_BACKUPDB_NO_BACKENDS_FOR_ID_261=None of the Directory Server \
 backends are configured with the requested backend ID "%s"
ERR_BACKUPDB_CANNOT_BACKUP_264=The target backend %s cannot be backed \
 up using the requested configuration
ERR_BACKUPDB_ERROR_DURING_BACKUP_265=An error occurred while \
 attempting to back up backend %s with the requested configuration:  %s
INFO_BACKUPDB_DESCRIPTION_BACKUP_ALL_274=Back up all backends in the server
ERR_BACKUPDB_CANNOT_MIX_BACKUP_ALL_AND_BACKEND_ID_275=The %s and %s \
 arguments may not be used together.  Exactly one of them must be provided
ERR_BACKUPDB_NEED_BACKUP_ALL_OR_BACKEND_ID_276=Neither the %s argument \
 nor the %s argument was provided.  Exactly one of them is required
ERR_BACKUPDB_CANNOT_CREATE_BACKUP_DIR_277=An error occurred while \
 attempting to create the backup directory %s:  %s
WARN_BACKUPDB_BACKUP_NOT_SUPPORTED_278=Backend ID %s was included in \
 the set of backends to archive, but this backend does not provide support for \
 a backup mechanism.  It will be skipped
WARN_BACKUPDB_NO_BACKENDS_TO_ARCHIVE_279=None of the target backends \
 provide a backup mechanism.  The backup operation has been aborted
NOTE_BACKUPDB_STARTING_BACKUP_280=Starting backup for backend %s
ERR_BACKUPDB_CANNOT_PARSE_BACKUP_DESCRIPTOR_281=An error occurred \
 while attempting to parse the backup descriptor file %s:  %s
NOTE_BACKUPDB_COMPLETED_WITH_ERRORS_282=The backup process completed with \
 one or more errors
NOTE_BACKUPDB_COMPLETED_SUCCESSFULLY_283=The backup process completed \
 successfully
ERR_CANNOT_INITIALIZE_CRYPTO_MANAGER_284=An error occurred while \
 attempting to initialize the crypto manager:  %s
ERR_CANNOT_INITIALIZE_SUBENTRY_MANAGER_285=An error occurred while \
 attempting to initialize the subentry manager:  %s
ERR_CANNOT_INITIALIZE_ROOTDN_MANAGER_286=An error occurred while \
 attempting to initialize the root DN manager:  %s
INFO_BACKUPDB_DESCRIPTION_INCREMENTAL_BASE_ID_287=Backup ID of the source \
 archive for an incremental backup
ERR_BACKUPDB_INCREMENTAL_BASE_REQUIRES_INCREMENTAL_288=The use of the \
 %s argument requires that the %s argument is also provided
INFO_RESTOREDB_DESCRIPTION_BACKUP_ID_292=Backup ID of the backup to restore
INFO_RESTOREDB_DESCRIPTION_BACKUP_DIR_293=Path to the directory containing \
 the backup file(s)
INFO_RESTOREDB_DESCRIPTION_LIST_BACKUPS_294=List available backups in the \
 backup directory
INFO_RESTOREDB_DESCRIPTION_VERIFY_ONLY_295=Verify the contents of the backup \
 but do not restore it
ERR_RESTOREDB_CANNOT_READ_BACKUP_DIRECTORY_304=An error occurred while \
 attempting to examine the set of backups contained in backup directory %s: \
 %s
INFO_RESTOREDB_LIST_BACKUP_ID_305=Backup ID:          %s
INFO_RESTOREDB_LIST_BACKUP_DATE_306=Backup Date:        %s
INFO_RESTOREDB_LIST_INCREMENTAL_307=Is Incremental:     %s
INFO_RESTOREDB_LIST_COMPRESSED_308=Is Compressed:      %s
INFO_RESTOREDB_LIST_ENCRYPTED_309=Is Encrypted:       %s
INFO_RESTOREDB_LIST_HASHED_310=Has Unsigned Hash:  %s
INFO_RESTOREDB_LIST_SIGNED_311=Has Signed Hash:    %s
INFO_RESTOREDB_LIST_DEPENDENCIES_312=Dependent Upon:     %s
ERR_RESTOREDB_INVALID_BACKUP_ID_313=The requested backup ID %s does \
 not exist in %s
ERR_RESTOREDB_NO_BACKUPS_IN_DIRECTORY_314=There are no Directory \
 Server backups contained in %s
ERR_RESTOREDB_NO_BACKENDS_FOR_DN_315=The backups contained in \
 directory %s were taken from a Directory Server backend defined in \
 configuration entry %s but no such backend is available
ERR_RESTOREDB_CANNOT_RESTORE_316=The Directory Server backend \
 configured with backend ID %s does not provide a mechanism for restoring \
 backups
ERR_RESTOREDB_ERROR_DURING_BACKUP_317=An unexpected error occurred \
 while attempting to restore backup %s from %s:  %s
ERR_RESTOREDB_ENCRYPT_OR_SIGN_REQUIRES_ONLINE_318=Restoring an \
 encrypted or signed backup requires a connection to an online server
ERR_BACKUPDB_ENCRYPT_OR_SIGN_REQUIRES_ONLINE_325=The use of the \
 %s argument or the %s argument requires a connection to an online server \
 instance
ERR_BACKUPDB_SIGN_REQUIRES_HASH_326=The use of the %s argument \
 requires that the %s argument is also provided
INFO_DESCRIPTION_NOOP_327=Show what would be done but do not perform any \
 operation
ERR_BACKUPDB_CANNOT_LOCK_BACKEND_328=An error occurred while \
 attempting to acquire a shared lock for backend %s:  %s.  This generally \
 means that some other process has exclusive access to this backend (e.g., a \
 restore or an LDIF import).  This backend will not be archived
WARN_BACKUPDB_CANNOT_UNLOCK_BACKEND_329=An error occurred while \
 attempting to release the shared lock for backend %s:  %s.  This lock should \
 automatically be cleared when the backup process exits, so no further action \
 should be required
ERR_RESTOREDB_CANNOT_LOCK_BACKEND_330=An error occurred while \
 attempting to acquire an exclusive lock for backend %s:  %s.  This generally \
 means some other process is still using this backend (e.g., it is in use by \
 the Directory Server or a backup or LDIF export is in progress).  The restore \
 cannot continue
WARN_RESTOREDB_CANNOT_UNLOCK_BACKEND_331=An error occurred while \
 attempting to release the exclusive lock for backend %s:  %s.  This lock \
 should automatically be cleared when the restore process exits, so no further \
 action should be required
ERR_LDIFIMPORT_CANNOT_LOCK_BACKEND_332=An error occurred while \
 attempting to acquire an exclusive lock for backend %s:  %s.  This generally \
 means some other process is still using this backend (e.g., it is in use by \
 the Directory Server or a backup or LDIF export is in progress).  The LDIF \
 import cannot continue
WARN_LDIFIMPORT_CANNOT_UNLOCK_BACKEND_333=An error occurred while \
 attempting to release the exclusive lock for backend %s:  %s.  This lock \
 should automatically be cleared when the import process exits, so no further \
 action should be required
ERR_LDIFEXPORT_CANNOT_LOCK_BACKEND_334=An error occurred while \
 attempting to acquire a shared lock for backend %s:  %s.  This generally \
 means that some other process has an exclusive lock on this backend (e.g., an \
 LDIF import or a restore).  The LDIF export cannot continue
WARN_LDIFEXPORT_CANNOT_UNLOCK_BACKEND_335=An error occurred while \
 attempting to release the shared lock for backend %s:  %s.  This lock should \
 automatically be cleared when the export process exits, so no further action \
 should be required
ERR_VERIFYINDEX_CANNOT_LOCK_BACKEND_336=An error occurred while \
 attempting to acquire a shared lock for backend %s:  %s.  This generally \
 means that some other process has an exclusive lock on this backend (e.g., an \
 LDIF import or a restore).  The index verification cannot continue
WARN_VERIFYINDEX_CANNOT_UNLOCK_BACKEND_337=An error occurred while \
 attempting to release the shared lock for backend %s:  %s.  This lock should \
 automatically be cleared when the verification process exits, so no further \
 action should be required
INFO_DESCRIPTION_TYPES_ONLY_338=Only retrieve attribute names but not their \
 values
INFO_LDIFIMPORT_DESCRIPTION_SKIP_SCHEMA_VALIDATION_339=Skip schema validation \
 during the LDIF import
ERR_LDIFEXPORT_CANNOT_INITIALIZE_PLUGINS_340=An error occurred while \
 attempting to initialize the LDIF export plugins:  %s
ERR_LDIFIMPORT_CANNOT_INITIALIZE_PLUGINS_341=An error occurred while \
 attempting to initialize the LDIF import plugins:  %s
INFO_DESCRIPTION_ASSERTION_FILTER_342=Use the LDAP assertion control with the \
 provided filter
ERR_LDAP_ASSERTION_INVALID_FILTER_343=The search filter provided for the \
 LDAP assertion control was invalid:  %s
INFO_DESCRIPTION_PREREAD_ATTRS_346=Use the LDAP ReadEntry pre-read control
INFO_DESCRIPTION_POSTREAD_ATTRS_347=Use the LDAP ReadEntry post-read control
ERR_LDAPMODIFY_PREREAD_CANNOT_DECODE_VALUE_349=An error occurred while \
 trying to decode the entry contained in the value of the pre-read response \
 control:  %s
INFO_LDAPMODIFY_PREREAD_ENTRY_350=Target entry before the operation:
ERR_LDAPMODIFY_POSTREAD_CANNOT_DECODE_VALUE_352=An error occurred while \
 trying to decode the entry contained in the value of the post-read response \
 control:  %s
INFO_LDAPMODIFY_POSTREAD_ENTRY_353=Target entry after the operation:
INFO_DESCRIPTION_PROXY_AUTHZID_354=Use the proxied authorization control with \
 the given authorization ID
INFO_DESCRIPTION_PSEARCH_INFO_355=Use the persistent search control
ERR_PSEARCH_MISSING_DESCRIPTOR_356=The request to use the persistent \
 search control did not include a descriptor that indicates the options to use \
 with that control
ERR_PSEARCH_DOESNT_START_WITH_PS_357=The persistent search descriptor %s \
 did not start with the required 'ps' string
ERR_PSEARCH_INVALID_CHANGE_TYPE_358=The provided change type value %s is \
 invalid.  The recognized change types are add, delete, modify, modifydn, and \
 any
ERR_PSEARCH_INVALID_CHANGESONLY_359=The provided changesOnly value %s is \
 invalid.  Allowed values are 1 to only return matching entries that have \
 changed since the beginning of the search, or 0 to also include existing \
 entries that match the search criteria
ERR_PSEARCH_INVALID_RETURN_ECS_360=The provided returnECs value %s is \
 invalid.  Allowed values are 1 to request that the entry change notification \
 control be included in updated entries, or 0 to exclude the control from \
 matching entries
INFO_DESCRIPTION_REPORT_AUTHZID_361=Use the authorization identity control
INFO_BIND_AUTHZID_RETURNED_362=# Bound with authorization ID %s
INFO_SEARCH_DESCRIPTION_FILENAME_363=File containing a list of search filter \
 strings
INFO_DESCRIPTION_MATCHED_VALUES_FILTER_364=Use the LDAP matched values \
 control with the provided filter
ERR_LDAP_MATCHEDVALUES_INVALID_FILTER_365=The provided matched values \
 filter was invalid:  %s
ERR_LDIF_FILE_CANNOT_OPEN_FOR_READ_366=An error occurred while \
 attempting to open the LDIF file %s for reading:  %s
ERR_LDIF_FILE_READ_ERROR_367=An error occurred while attempting to read \
 the contents of LDIF file %s:  %s
ERR_LDIF_FILE_INVALID_LDIF_ENTRY_368=Error at or near line %d in LDIF \
 file %s:  %s
INFO_ENCPW_DESCRIPTION_AUTHPW_369=Use the authentication password syntax \
 rather than the user password syntax
ERR_ENCPW_NO_SUCH_AUTH_SCHEME_371=Authentication password storage \
 scheme "%s" is not configured for use in the Directory Server
ERR_ENCPW_INVALID_ENCODED_AUTHPW_372=The provided password is not a \
 valid encoded authentication password value:  %s
ERR_LDIFIMPORT_CANNOT_INITIALIZE_PWPOLICY_373=An error occurred while \
 attempting to initialize the password policy components:  %s
INFO_STOPDS_DESCRIPTION_HOST_374=Directory server hostname or IP address
INFO_STOPDS_DESCRIPTION_PORT_375=Directory server administration port number
INFO_STOPDS_DESCRIPTION_BINDDN_378=DN to use to bind to the server
INFO_STOPDS_DESCRIPTION_BINDPW_379=Password to use to bind to the server
INFO_STOPDS_DESCRIPTION_BINDPWFILE_380=Bind password file
INFO_STOPDS_DESCRIPTION_SASLOPTIONS_381=SASL bind options
INFO_STOPDS_DESCRIPTION_PROXYAUTHZID_382=Use the proxied authorization \
 control with the given authorization ID
INFO_STOPDS_DESCRIPTION_STOP_REASON_383=Reason the server is being stopped or \
 restarted
INFO_STOPDS_DESCRIPTION_STOP_TIME_384=Indicates the date/time at which the \
 shutdown operation will begin as a server task expressed in format \
 YYYYMMDDhhmmssZ for UTC time or YYYYMMDDhhmmss for local time.  A value of \
 '0' will cause the shutdown to be scheduled for \
 immediate execution.  When this option is specified the operation will be \
 scheduled to start at the specified time after which this utility will exit \
 immediately
INFO_STOPDS_DESCRIPTION_TRUST_ALL_385=Trust all server SSL certificates
INFO_STOPDS_DESCRIPTION_KSFILE_386=Certificate key store path
INFO_STOPDS_DESCRIPTION_KSPW_387=Certificate key store PIN
INFO_STOPDS_DESCRIPTION_KSPWFILE_388=Certificate key store PIN file
INFO_STOPDS_DESCRIPTION_TSFILE_389=Certificate trust store path
INFO_STOPDS_DESCRIPTION_TSPW_390=Certificate trust store PIN
INFO_STOPDS_DESCRIPTION_TSPWFILE_391=Certificate trust store PIN file
INFO_STOPDS_DESCRIPTION_SHOWUSAGE_392=Display this usage information
ERR_STOPDS_MUTUALLY_EXCLUSIVE_ARGUMENTS_395=ERROR:  You may not \
 provide both the %s and the %s arguments
ERR_STOPDS_CANNOT_DECODE_STOP_TIME_396=ERROR:  Unable to decode the \
 provided stop time.  It should be in the form YYYYMMDDhhmmssZ for UTC time or \
 YYYYMMDDhhmmss for local time
ERR_STOPDS_CANNOT_INITIALIZE_SSL_397=ERROR:  Unable to perform SSL \
 initialization:  %s
ERR_STOPDS_CANNOT_PARSE_SASL_OPTION_398=ERROR:  The provided SASL \
 option string "%s" could not be parsed in the form "name=value"
ERR_STOPDS_NO_SASL_MECHANISM_399=ERROR:  One or more SASL options were \
 provided, but none of them were the "mech" option to specify which SASL \
 mechanism should be used
ERR_STOPDS_CANNOT_DETERMINE_PORT_400=ERROR:  Cannot parse the value of \
 the %s argument as an integer value between 1 and 65535:  %s
ERR_STOPDS_CANNOT_CONNECT_401=ERROR:  Cannot establish a connection to \
 the Directory Server %s.  Verify that the server is running and that \
 the provided credentials are valid.  Details:  %s
ERR_STOPDS_UNEXPECTED_CONNECTION_CLOSURE_402=NOTICE:  The connection \
 to the Directory Server was closed while waiting for a response to the \
 shutdown request.  This likely means that the server has started the shutdown \
 process
ERR_STOPDS_IO_ERROR_403=ERROR:  An I/O error occurred while attempting \
 to communicate with the Directory Server:  %s
ERR_STOPDS_DECODE_ERROR_404=ERROR:  An error occurred while trying to \
 decode the response from the server:  %s
ERR_STOPDS_INVALID_RESPONSE_TYPE_405=ERROR:  Expected an add response \
 message but got a %s message instead
INFO_BIND_PASSWORD_EXPIRED_406=# Your password has expired
INFO_BIND_PASSWORD_EXPIRING_407=# Your password will expire in %s
INFO_BIND_ACCOUNT_LOCKED_408=# Your account has been locked
INFO_BIND_MUST_CHANGE_PASSWORD_409=# You must change your password before any \
 other operations will be allowed
INFO_BIND_GRACE_LOGINS_REMAINING_410=# You have %d grace logins remaining
INFO_DESCRIPTION_USE_PWP_CONTROL_411=Use the password policy request control
INFO_STOPDS_DESCRIPTION_RESTART_412=Attempt to automatically restart the \
 server once it has stopped
INFO_COMPARE_DESCRIPTION_FILENAME_413=File containing the DNs of the entries \
 to compare
INFO_LDIFSEARCH_DESCRIPTION_LDIF_FILE_414=LDIF file containing \
 the data to search.  Multiple files may be specified by providing the option \
 multiple times.  If no files are provided, the data will be read from \
 standard input
INFO_LDIFSEARCH_DESCRIPTION_BASEDN_415=The base DN for the search.  Multiple \
 base DNs may be specified by providing the option multiple times.  If no base \
 DN is provided, then the root DSE will be used
INFO_LDIFSEARCH_DESCRIPTION_SCOPE_416=The scope for the search.  It must be \
 one of 'base', 'one', 'sub', or 'subordinate'.  If it is not provided, then \
 'sub' will be used
INFO_LDIFSEARCH_DESCRIPTION_FILTER_FILE_419=The path to the file containing \
 the search filter(s) to use.  If this is not provided, then the filter must \
 be provided on the command line after all configuration options
INFO_LDIFSEARCH_DESCRIPTION_OUTPUT_FILE_420=The path to the output file to \
 which the matching entries should be written.  If this is not provided, then \
 the data will be written to standard output
INFO_LDIFSEARCH_DESCRIPTION_OVERWRITE_EXISTING_421=Any existing output \
 file should be overwritten rather than appending to it
INFO_LDIFSEARCH_DESCRIPTION_DONT_WRAP_422=Long lines should \
 not be wrapped
INFO_LDIFSEARCH_DESCRIPTION_SIZE_LIMIT_423=Maximum number of \
 matching entries to return
INFO_LDIFSEARCH_DESCRIPTION_TIME_LIMIT_424=Maximum length of \
 time (in seconds) to spend processing
ERR_LDIFSEARCH_NO_FILTER_428=No search filter was specified.  Either a \
 filter file or an individual search filter must be provided
ERR_LDIFSEARCH_CANNOT_INITIALIZE_CONFIG_429=An error occurred while \
 attempting to process the Directory Server configuration file %s:  %s
ERR_LDIFSEARCH_CANNOT_INITIALIZE_SCHEMA_430=An error occurred while \
 attempting to initialize the Directory Server schema based on the information \
 in configuration file %s:  %s
ERR_LDIFSEARCH_CANNOT_PARSE_FILTER_431=An error occurred while \
 attempting to parse search filter '%s':  %s
ERR_LDIFSEARCH_CANNOT_PARSE_BASE_DN_432=An error occurred while \
 attempting to parse base DN '%s':  %s
ERR_LDIFSEARCH_CANNOT_PARSE_TIME_LIMIT_433=An error occurred while \
 attempting to parse the time limit as an integer:  %s
ERR_LDIFSEARCH_CANNOT_PARSE_SIZE_LIMIT_434=An error occurred while \
 attempting to parse the size limit as an integer:  %s
ERR_LDIFSEARCH_CANNOT_CREATE_READER_435=An error occurred while \
 attempting to create the LDIF reader:  %s
ERR_LDIFSEARCH_CANNOT_CREATE_WRITER_436=An error occurred while \
 attempting to create the LDIF writer used to return matching entries:  %s
WARN_LDIFSEARCH_TIME_LIMIT_EXCEEDED_437=The specified time limit has \
 been exceeded during search processing
WARN_LDIFSEARCH_SIZE_LIMIT_EXCEEDED_438=The specified size limit has \
 been exceeded during search processing
ERR_LDIFSEARCH_CANNOT_READ_ENTRY_RECOVERABLE_439=An error occurred \
 while attempting to read an entry from the LDIF content:  %s.  Skipping this \
 entry and continuing processing
ERR_LDIFSEARCH_CANNOT_READ_ENTRY_FATAL_440=An error occurred while \
 attempting to read an entry from the LDIF content:  %s.  Unable to continue \
 processing
ERR_LDIFSEARCH_ERROR_DURING_PROCESSING_441=An unexpected error \
 occurred during search processing:  %s
ERR_LDIFSEARCH_CANNOT_INITIALIZE_JMX_442=An error occurred while \
 attempting to initialize the Directory Server JMX subsystem based on the \
 information in configuration file %s:  %s
INFO_LDIFDIFF_DESCRIPTION_SOURCE_LDIF_443=LDIF file to use as \
 the source data
INFO_LDIFDIFF_DESCRIPTION_TARGET_LDIF_444=LDIF file to use as \
 the target data
INFO_LDIFDIFF_DESCRIPTION_OUTPUT_LDIF_445=File to which the \
 output should be written
INFO_LDIFDIFF_DESCRIPTION_OVERWRITE_EXISTING_446=Any existing \
 output file should be overwritten rather than appending to it
ERR_LDIFDIFF_CANNOT_INITIALIZE_JMX_452=An error occurred while \
 attempting to initialize the Directory Server JMX subsystem based on the \
 information in configuration file %s:  %s
ERR_LDIFDIFF_CANNOT_INITIALIZE_CONFIG_453=An error occurred while \
 attempting to process the Directory Server configuration file %s:  %s
ERR_LDIFDIFF_CANNOT_INITIALIZE_SCHEMA_454=An error occurred while \
 attempting to initialize the Directory Server schema based on the information \
 in configuration file %s:  %s
ERR_LDIFDIFF_CANNOT_OPEN_SOURCE_LDIF_455=An error occurred while \
 attempting to open source LDIF %s:  %s
ERR_LDIFDIFF_ERROR_READING_SOURCE_LDIF_456=An error occurred while \
 reading the contents of source LDIF %s:  %s
ERR_LDIFDIFF_CANNOT_OPEN_TARGET_LDIF_457=An error occurred while \
 attempting to open target LDIF %s:  %s
ERR_LDIFDIFF_ERROR_READING_TARGET_LDIF_458=An error occurred while \
 reading the contents of target LDIF %s:  %s
ERR_LDIFDIFF_CANNOT_OPEN_OUTPUT_459=An error occurred while attempting \
 to open the LDIF writer for the diff output:  %s
INFO_LDIFDIFF_NO_DIFFERENCES_460=No differences were detected between the \
 source and target LDIF files
ERR_LDIFDIFF_ERROR_WRITING_OUTPUT_461=An error occurred while \
 attempting to write the diff output:  %s
INFO_CONFIGDS_DESCRIPTION_LDAP_PORT_464=Port on which the \
 Directory Server should listen for LDAP communication
INFO_CONFIGDS_DESCRIPTION_BASE_DN_465=Base DN for user \
 information in the Directory Server.  Multiple base DNs may be provided by \
 using this option multiple times
INFO_CONFIGDS_DESCRIPTION_ROOT_DN_466=DN for the initial root \
 user for the Directory Server
INFO_CONFIGDS_DESCRIPTION_ROOT_PW_467=Password for the initial \
 root user for the Directory Server
INFO_CONFIGDS_DESCRIPTION_ROOT_PW_FILE_468=Path to a file \
 containing the password for the initial root user for the Directory Server
ERR_CONFIGDS_CANNOT_ACQUIRE_SERVER_LOCK_472=An error occurred while \
 attempting to acquire the server-wide lock file %s:  %s.  This generally \
 means that the Directory Server is running, or another tool that requires \
 exclusive access to the server is in use
ERR_CONFIGDS_CANNOT_INITIALIZE_JMX_473=An error occurred while \
 attempting to initialize the Directory Server JMX subsystem based on the \
 information in configuration file %s:  %s
ERR_CONFIGDS_CANNOT_INITIALIZE_CONFIG_474=An error occurred while \
 attempting to process the Directory Server configuration file %s:  %s
ERR_CONFIGDS_CANNOT_INITIALIZE_SCHEMA_475=An error occurred while \
 attempting to initialize the Directory Server schema based on the information \
 in configuration file %s:  %s
ERR_CONFIGDS_CANNOT_PARSE_BASE_DN_476=An error occurred while \
 attempting to parse base DN value "%s" as a DN:  %s
ERR_CONFIGDS_CANNOT_PARSE_ROOT_DN_477=An error occurred while \
 attempting to parse root DN value "%s" as a DN:  %s
ERR_CONFIGDS_NO_ROOT_PW_478=The DN for the initial root user was \
 provided, but no corresponding password was given.  If the root DN is \
 specified then the password must also be provided
ERR_CONFIGDS_CANNOT_UPDATE_BASE_DN_479=An error occurred while \
 attempting to update the base DN(s) for user data in the Directory Server: \
 %s
ERR_CONFIGDS_CANNOT_UPDATE_LDAP_PORT_480=An error occurred while \
 attempting to update the port on which to listen for LDAP communication:  %s
ERR_CONFIGDS_CANNOT_UPDATE_ROOT_USER_481=An error occurred while \
 attempting to update the entry for the initial Directory Server root user: \
 %s
ERR_CONFIGDS_CANNOT_WRITE_UPDATED_CONFIG_482=An error occurred while \
 writing the updated Directory Server configuration:  %s
ERR_CONFIGDS_NO_CONFIG_CHANGES_483=ERROR:  No configuration changes \
 were specified
INFO_CONFIGDS_WROTE_UPDATED_CONFIG_484=Successfully wrote the updated \
 Directory Server configuration
INFO_INSTALLDS_DESCRIPTION_TESTONLY_485=Just verify that the JVM can be \
 started properly
INFO_INSTALLDS_DESCRIPTION_PROGNAME_486=The setup command used to invoke this \
 program
INFO_INSTALLDS_DESCRIPTION_SILENT_489=Run setup in quiet mode.  Quiet mode \
 will not output progress information to standard output
INFO_INSTALLDS_DESCRIPTION_BASEDN_490=Base DN for user \
 information in the Directory Server.  Multiple base DNs may be provided by \
 using this option multiple times
INFO_INSTALLDS_DESCRIPTION_ADDBASE_491=Indicates whether to create the base \
 entry in the Directory Server database
INFO_INSTALLDS_DESCRIPTION_IMPORTLDIF_492=Path to an LDIF file \
 containing data that should be added to the Directory Server database. \
 Multiple LDIF files may be provided by using this option multiple times
INFO_INSTALLDS_DESCRIPTION_LDAPPORT_493=Port on which the \
 Directory Server should listen for LDAP communication
INFO_INSTALLDS_DESCRIPTION_SKIPPORT_494=Skip the check to determine whether \
 the specified ports are usable
INFO_INSTALLDS_DESCRIPTION_ROOTDN_495=DN for the initial root \
 user for the Directory Server
INFO_INSTALLDS_DESCRIPTION_ROOTPW_496=Password for the initial \
 root user for the Directory Server
INFO_INSTALLDS_DESCRIPTION_ROOTPWFILE_497=Path to a file \
 containing the password for the initial root user for the Directory Server
INFO_INSTALLDS_DESCRIPTION_HELP_498=Display this usage information
ERR_INSTALLDS_CANNOT_PARSE_DN_503=An error occurred while attempting \
 to parse the string "%s" as a valid DN:  %s
INFO_INSTALLDS_PROMPT_BASEDN_504=Provide the base DN for the directory data:
INFO_INSTALLDS_PROMPT_IMPORT_505=Do you wish to populate the directory \
 database with information from an existing LDIF file?
INFO_INSTALLDS_PROMPT_IMPORT_FILE_506=Please specify the path to the LDIF \
 file containing the data to import:
ERR_INSTALLDS_TWO_CONFLICTING_ARGUMENTS_507=ERROR:  You may not \
 provide both the %s and the %s arguments at the same time
INFO_INSTALLDS_PROMPT_LDAPPORT_509=On which port would you like the Directory \
 Server to accept connections from LDAP clients?
ERR_INSTALLDS_CANNOT_BIND_TO_PRIVILEGED_PORT_510=ERROR:  Unable to \
 bind to port %d.  This port may already be in use, or you may not have \
 permission to bind to it.  On UNIX-based operating systems, non-root users \
 may not be allowed to bind to ports 1 through 1024
ERR_INSTALLDS_CANNOT_BIND_TO_PORT_511=ERROR:  Unable to bind to port \
 %d.  This port may already be in use, or you may not have permission to bind \
 to it
INFO_INSTALLDS_PROMPT_ROOT_DN_512=What would you like to use as the initial \
 root user DN for the Directory Server?
ERR_INSTALLDS_NO_ROOT_PASSWORD_513=ERROR:  No password was provided \
 for the initial root user.  When performing a non-interactive installation, \
 this must be provided using either the %s or the %s argument
INFO_INSTALLDS_PROMPT_ROOT_PASSWORD_514=Please provide the password to use \
 for the initial root user:
INFO_INSTALLDS_PROMPT_CONFIRM_ROOT_PASSWORD_515=Please re-enter the password \
 for confirmation:
ERR_INSTALLDS_INVALID_INTEGER_RESPONSE_524=ERROR:  The provided response \
 could not be interpreted as an integer.  Please provide the response as an \
 integer value
ERR_INSTALLDS_INTEGER_BELOW_LOWER_BOUND_525=ERROR:  The provided value \
 is less than the lowest allowed value of %d
ERR_INSTALLDS_INTEGER_ABOVE_UPPER_BOUND_526=ERROR:  The provided value \
 is greater than the largest allowed value of %d
ERR_INSTALLDS_INVALID_DN_RESPONSE_527=ERROR:  The provided response \
 could not be interpreted as an LDAP DN
ERR_INSTALLDS_PASSWORDS_DONT_MATCH_530=ERROR:  The provided password \
 values do not match
INFO_LDIFIMPORT_DESCRIPTION_QUIET_532=Use quiet mode (no output)
ERR_MAKELDIF_TAG_INVALID_ARGUMENT_COUNT_535=Invalid number of arguments \
 provided for tag %s on line number %d of the template file:  expected %d, got \
 %d
ERR_MAKELDIF_TAG_INVALID_ARGUMENT_RANGE_COUNT_536=Invalid number of \
 arguments provided for tag %s on line number %d of the template file: \
 expected between %d and %d, got %d
ERR_MAKELDIF_TAG_UNDEFINED_ATTRIBUTE_537=Undefined attribute %s \
 referenced on line %d of the template file
ERR_MAKELDIF_TAG_INTEGER_BELOW_LOWER_BOUND_538=Value %d is below the \
 lowest allowed value of %d for tag %s on line %d of the template file
ERR_MAKELDIF_TAG_CANNOT_PARSE_AS_INTEGER_539=Cannot parse value "%s" as \
 an integer for tag %s on line %d of the template file
ERR_MAKELDIF_TAG_INTEGER_ABOVE_UPPER_BOUND_540=Value %d is above the \
 largest allowed value of %d for tag %s on line %d of the template file
ERR_MAKELDIF_TAG_CANNOT_PARSE_AS_BOOLEAN_542=Cannot parse value "%s" as \
 a Boolean value for tag %s on line %d of the template file.  The value must \
 be either 'true' or 'false'
ERR_MAKELDIF_UNDEFINED_BRANCH_SUBORDINATE_543=The branch with entry DN \
 '%s' references a subordinate template named '%s' which is not defined in the \
 template file
ERR_MAKELDIF_CANNOT_LOAD_TAG_CLASS_544=Unable to load class %s for use \
 as a MakeLDIF tag
ERR_MAKELDIF_CANNOT_INSTANTIATE_TAG_545=Cannot instantiate class %s as a \
 MakeLDIF tag
ERR_MAKELDIF_CONFLICTING_TAG_NAME_546=Cannot register the tag defined in \
 class %s because the tag name %s conflicts with the name of another tag that \
 has already been registered
WARN_MAKELDIF_WARNING_UNDEFINED_CONSTANT_547=Possible reference to an \
 undefined constant %s on line %d
ERR_MAKELDIF_DEFINE_MISSING_EQUALS_548=The constant definition on line \
 %d is missing an equal sign to delimit the constant name from the value
ERR_MAKELDIF_DEFINE_NAME_EMPTY_549=The constant definition on line %d \
 does not include a name for the constant
ERR_MAKELDIF_CONFLICTING_CONSTANT_NAME_550=The definition for constant \
 %s on line %d conflicts with an earlier constant definition included in the \
 template
ERR_MAKELDIF_WARNING_DEFINE_VALUE_EMPTY_551=Constant %s defined on line \
 %d has not been assigned a value
ERR_MAKELDIF_CONFLICTING_BRANCH_DN_552=The branch definition %s starting \
 on line %d conflicts with an earlier branch definition contained in the \
 template file
ERR_MAKELDIF_CONFLICTING_TEMPLATE_NAME_553=The template definition %s \
 starting on line %d conflicts with an earlier template definition contained \
 in the template file
ERR_MAKELDIF_UNEXPECTED_TEMPLATE_FILE_LINE_554=Unexpected template line \
 "%s" encountered on line %d of the template file
ERR_MAKELDIF_UNDEFINED_TEMPLATE_SUBORDINATE_555=The template named %s \
 references a subordinate template named %s which is not defined in the \
 template file
ERR_MAKELDIF_CANNOT_DECODE_BRANCH_DN_556=Unable to decode branch DN "%s" \
 on line %d of the template file
ERR_MAKELDIF_BRANCH_SUBORDINATE_TEMPLATE_NO_COLON_557=Subordinate \
 template definition on line %d for branch %s is missing a colon to separate \
 the template name from the number of entries
ERR_MAKELDIF_BRANCH_SUBORDINATE_INVALID_NUM_ENTRIES_558=Subordinate \
 template definition on line %d for branch %s specified invalid number of \
 entries %d for template %s
WARN_MAKELDIF_BRANCH_SUBORDINATE_ZERO_ENTRIES_559=Subordinate template \
 definition on line %d for branch %s specifies that zero entries of type %s \
 should be generated
ERR_MAKELDIF_BRANCH_SUBORDINATE_CANT_PARSE_NUMENTRIES_560=Unable to \
 parse the number of entries for template %s as an integer for the subordinate \
 template definition on line %d for branch %s
ERR_MAKELDIF_TEMPLATE_SUBORDINATE_TEMPLATE_NO_COLON_561=Subordinate \
 template definition on line %d for template %s is missing a colon to separate \
 the template name from the number of entries
ERR_MAKELDIF_TEMPLATE_SUBORDINATE_INVALID_NUM_ENTRIES_562=Subordinate \
 template definition on line %d for template %s specified invalid number of \
 entries %d for subordinate template %s
WARN_MAKELDIF_TEMPLATE_SUBORDINATE_ZERO_ENTRIES_563=Subordinate template \
 definition on line %d for template %s specifies that zero entries of type %s \
 should be generated
ERR_MAKELDIF_TEMPLATE_SUBORDINATE_CANT_PARSE_NUMENTRIES_564=Unable to \
 parse the number of entries for template %s as an integer for the subordinate \
 template definition on line %d for template %s
ERR_MAKELDIF_TEMPLATE_MISSING_RDN_ATTR_565=The template named %s \
 includes RDN attribute %s that is not assigned a value in that template
ERR_MAKELDIF_NO_COLON_IN_BRANCH_EXTRA_LINE_566=There is no colon to \
 separate the attribute name from the value pattern on line %d of the template \
 file in the definition for branch %s
ERR_MAKELDIF_NO_ATTR_IN_BRANCH_EXTRA_LINE_567=There is no attribute name \
 before the colon on line %d of the template file in the definition for branch \
 %s
WARN_MAKELDIF_NO_VALUE_IN_BRANCH_EXTRA_LINE_568=The value pattern for \
 line %d of the template file in the definition for branch %s is empty
ERR_MAKELDIF_NO_COLON_IN_TEMPLATE_LINE_569=There is no colon to separate \
 the attribute name from the value pattern on line %d of the template file in \
 the definition for template %s
ERR_MAKELDIF_NO_ATTR_IN_TEMPLATE_LINE_570=There is no attribute name \
 before the colon on line %d of the template file in the definition for \
 template %s
WARN_MAKELDIF_NO_VALUE_IN_TEMPLATE_LINE_571=The value pattern for line \
 %d of the template file in the definition for template %s is empty
ERR_MAKELDIF_NO_SUCH_TAG_572=An undefined tag %s is referenced on line \
 %d of the template file
ERR_MAKELDIF_CANNOT_INSTANTIATE_NEW_TAG_573=An unexpected error occurred \
 while trying to create a new instance of tag %s referenced on line %d of the \
 template file:  %s
INFO_MAKELDIF_DESCRIPTION_TEMPLATE_576=The path to the template file with \
 information about the LDIF data to generate
INFO_MAKELDIF_DESCRIPTION_LDIF_577=The path to the LDIF file to be written
INFO_MAKELDIF_DESCRIPTION_SEED_578=The seed to use to initialize the random \
 number generator
INFO_MAKELDIF_DESCRIPTION_HELP_579=Show this usage information
ERR_MAKELDIF_CANNOT_INITIALIZE_JMX_582=An error occurred while \
 attempting to initialize the Directory Server JMX subsystem based on the \
 information in configuration file %s:  %s
ERR_MAKELDIF_CANNOT_INITIALIZE_CONFIG_583=An error occurred while \
 attempting to process the Directory Server configuration file %s:  %s
ERR_MAKELDIF_CANNOT_INITIALIZE_SCHEMA_584=An error occurred while \
 attempting to initialize the Directory Server schema based on the information \
 in configuration file %s:  %s
ERR_MAKELDIF_IOEXCEPTION_DURING_PARSE_585=An error occurred while \
 attempting to read the template file:  %s
ERR_MAKELDIF_EXCEPTION_DURING_PARSE_586=An error occurred while \
 attempting to parse the template file:  %s
ERR_MAKELDIF_TAG_INVALID_FORMAT_STRING_587=Cannot parse value "%s" as an \
 valid format string for tag %s on line %d of the template file
ERR_MAKELDIF_TAG_NO_RANDOM_TYPE_ARGUMENT_588=The random tag on line %d \
 of the template file does not include an argument to specify the type of \
 random value that should be generated
WARN_MAKELDIF_TAG_WARNING_EMPTY_VALUE_589=The value generated from the \
 random tag on line %d of the template file will always be an empty string
ERR_MAKELDIF_TAG_UNKNOWN_RANDOM_TYPE_590=The random tag on line %d of \
 the template file references an unknown random type of %s
INFO_MAKELDIF_DESCRIPTION_RESOURCE_PATH_591=Path to look for \
 MakeLDIF resources (e.g., data files) not found in the current working \
 directory or template directory path
ERR_MAKELDIF_COULD_NOT_FIND_TEMPLATE_FILE_592=Could not find template \
 file %s
ERR_MAKELDIF_NO_SUCH_RESOURCE_DIRECTORY_593=The specified resource \
 directory %s could not be found
ERR_MAKELDIF_TAG_CANNOT_FIND_FILE_595=Cannot find file %s referenced by \
 tag %s on line %d of the template file
ERR_MAKELDIF_TAG_INVALID_FILE_ACCESS_MODE_596=Invalid file access mode \
 %s for tag %s on line %d of the template file.  It must be either \
 "sequential" or "random"
ERR_MAKELDIF_TAG_CANNOT_READ_FILE_597=An error occurred while trying to \
 read file %s referenced by tag %s on line %d of the template file:  %s
ERR_MAKELDIF_UNABLE_TO_CREATE_LDIF_598=An error occurred while \
 attempting to open LDIF file %s for writing:  %s
ERR_MAKELDIF_ERROR_WRITING_LDIF_599=An error occurred while writing data \
 to LDIF file %s:  %s
INFO_MAKELDIF_PROCESSED_N_ENTRIES_600=Processed %d entries
ERR_MAKELDIF_CANNOT_WRITE_ENTRY_601=An error occurred while attempting \
 to write entry %s to LDIF:  %s
INFO_MAKELDIF_PROCESSING_COMPLETE_602=LDIF processing complete.  %d entries \
 written
INFO_LDIFIMPORT_DESCRIPTION_TEMPLATE_FILE_603=Path to a MakeLDIF template to \
 use to generate the import data
ERR_LDIFIMPORT_CONFLICTING_OPTIONS_604=The %s and %s arguments are \
 incompatible and may not be used together
ERR_LDIFIMPORT_MISSING_REQUIRED_ARGUMENT_605=Neither the %s or the %s \
 argument was provided.  One of these arguments must be given to specify the \
 source for the LDIF data to be imported
ERR_LDIFIMPORT_CANNOT_PARSE_TEMPLATE_FILE_606=Unable to parse the \
 specified file %s as a MakeLDIF template file:  %s
ERR_MAKELDIF_INCOMPLETE_TAG_607=Line %d of the template file contains an \
 incomplete tag that starts with either '<' or '{' but does get closed
ERR_MAKELDIF_TAG_NOT_ALLOWED_IN_BRANCH_608=Tag %s referenced on line %d \
 of the template file is not allowed for use in branch definitions
INFO_LDIFIMPORT_DESCRIPTION_RANDOM_SEED_609=Seed for the MakeLDIF random \
 number generator
ERR_LDIFMODIFY_CANNOT_ADD_ENTRY_TWICE_610=Entry %s is added twice in the \
 set of changes to apply, which is not supported by the LDIF modify tool
ERR_LDIFMODIFY_CANNOT_DELETE_AFTER_ADD_611=Entry %s cannot be deleted \
 because it was previously added in the set of changes.  This is not supported \
 by the LDIF modify tool
ERR_LDIFMODIFY_CANNOT_MODIFY_ADDED_OR_DELETED_612=Cannot modify entry %s \
 because it was previously added or deleted in the set of changes.  This is \
 not supported by the LDIF modify tool
ERR_LDIFMODIFY_MODDN_NOT_SUPPORTED_613=The modify DN operation targeted \
 at entry %s cannot be processed because modify DN operations are not \
 supported by the LDIF modify tool
ERR_LDIFMODIFY_UNKNOWN_CHANGETYPE_614=Entry %s has an unknown changetype \
 of %s
ERR_LDIFMODIFY_ADD_ALREADY_EXISTS_615=Unable to add entry %s because it \
 already exists in the data set
ERR_LDIFMODIFY_DELETE_NO_SUCH_ENTRY_616=Unable to delete entry %s \
 because it does not exist in the data set
ERR_LDIFMODIFY_MODIFY_NO_SUCH_ENTRY_617=Unable to modify entry %s \
 because it does not exist in the data set
INFO_LDIFMODIFY_DESCRIPTION_SOURCE_620=LDIF file containing the \
 data to be updated
INFO_LDIFMODIFY_DESCRIPTION_CHANGES_621=LDIF file containing \
 the changes to apply
INFO_LDIFMODIFY_DESCRIPTION_TARGET_622=File to which the \
 updated data should be written
INFO_LDIFMODIFY_DESCRIPTION_HELP_623=Displays this usage information
ERR_LDIFMODIFY_CANNOT_INITIALIZE_JMX_626=An error occurred while \
 attempting to initialize the Directory Server JMX subsystem based on the \
 information in configuration file %s:  %s
ERR_LDIFMODIFY_CANNOT_INITIALIZE_CONFIG_627=An error occurred while \
 attempting to process the Directory Server configuration file %s:  %s
ERR_LDIFMODIFY_CANNOT_INITIALIZE_SCHEMA_628=An error occurred while \
 attempting to initialize the Directory Server schema based on the information \
 in configuration file %s:  %s
ERR_LDIFMODIFY_SOURCE_DOES_NOT_EXIST_629=The source LDIF file %s does \
 not exist
ERR_LDIFMODIFY_CANNOT_OPEN_SOURCE_630=Unable to open the source LDIF \
 file %s:  %s
ERR_LDIFMODIFY_CHANGES_DOES_NOT_EXIST_631=The changes LDIF file %s \
 does not exist
ERR_LDIFMODIFY_CANNOT_OPEN_CHANGES_632=Unable to open the changes LDIF \
 file %s:  %s
ERR_LDIFMODIFY_CANNOT_OPEN_TARGET_633=Unable to open the target LDIF \
 file %s for writing:  %s
ERR_LDIFMODIFY_ERROR_PROCESSING_LDIF_634=An error occurred while \
 processing the requested changes:  %s
INFO_LDAPPWMOD_DESCRIPTION_HOST_635=Address of the Directory \
 Server system
INFO_LDAPPWMOD_DESCRIPTION_PORT_636=Port on which the Directory \
 Server listens for LDAP client connections
INFO_LDAPPWMOD_DESCRIPTION_BIND_DN_637=DN to use to bind to the server
INFO_LDAPPWMOD_DESCRIPTION_BIND_PW_638=Password to use to bind to the server
INFO_LDAPPWMOD_DESCRIPTION_BIND_PW_FILE_639=Path to a file \
 containing the password to use to bind to the server
INFO_LDAPPWMOD_DESCRIPTION_AUTHZID_640=Authorization ID for the \
 user entry whose password should be changed. \
 The authorization ID is a string having either \
 the prefix "dn:" followed by the user's distinguished name, or \
 the prefix "u:" followed by a user identifier \
 that depends on the identity mapping used \
 to match the user identifier to an entry in the directory. \
 Examples include "dn:uid=bjensen,ou=People,dc=example,dc=com", and, \
 if we assume that "bjensen" is mapped to Barbara Jensen's entry, "u:bjensen"
INFO_LDAPPWMOD_DESCRIPTION_PROVIDE_DN_FOR_AUTHZID_641=Use the bind \
 DN as the authorization ID for the password modify operation
INFO_LDAPPWMOD_DESCRIPTION_NEWPW_642=New password to provide \
 for the target user
INFO_LDAPPWMOD_DESCRIPTION_NEWPWFILE_643=Path to a file \
 containing the new password to provide for the target user
INFO_LDAPPWMOD_DESCRIPTION_CURRENTPW_644=Current password for \
 the target user
INFO_LDAPPWMOD_DESCRIPTION_CURRENTPWFILE_645=Path to a file \
 containing the current password for the target user
INFO_LDAPPWMOD_DESCRIPTION_USE_SSL_646=Use SSL to secure the communication \
 with the Directory Server
INFO_LDAPPWMOD_DESCRIPTION_USE_STARTTLS_647=Use StartTLS to secure the \
 communication with the Directory Server
INFO_LDAPPWMOD_DESCRIPTION_BLIND_TRUST_648=Blindly trust any SSL certificate \
 presented by the server
INFO_LDAPPWMOD_DESCRIPTION_KEYSTORE_649=Path to the key store to use when \
 establishing SSL/TLS communication with the server
INFO_LDAPPWMOD_DESCRIPTION_KEYSTORE_PINFILE_650=Path to a file containing \
 the PIN needed to access the contents of the key store
INFO_LDAPPWMOD_DESCRIPTION_TRUSTSTORE_651=Path to the trust store to use \
 when establishing SSL/TLS communication with the server
INFO_LDAPPWMOD_DESCRIPTION_TRUSTSTORE_PINFILE_652=Path to a file \
 containing the PIN needed to access the contents of the trust store
ERR_LDAPPWMOD_CONFLICTING_ARGS_656=The %s and %s arguments may not be \
 provided together
ERR_LDAPPWMOD_BIND_DN_AND_PW_MUST_BE_TOGETHER_657=If either a bind DN \
 or bind password is provided, then the other must be given as well
ERR_LDAPPWMOD_ANON_REQUIRES_AUTHZID_AND_CURRENTPW_658=If a bind DN and \
 password are not provided, then an authorization ID and current password must \
 be given
ERR_LDAPPWMOD_DEPENDENT_ARGS_659=If the %s argument is provided, then \
 the  %s argument must also be given
ERR_LDAPPWMOD_ERROR_INITIALIZING_SSL_660=Unable to initialize SSL/TLS \
 support:  %s
ERR_LDAPPWMOD_CANNOT_CONNECT_661=An error occurred while attempting to \
 connect to the Directory Server:  %s
ERR_LDAPPWMOD_CANNOT_SEND_PWMOD_REQUEST_662=Unable to send the LDAP \
 password modify request:  %s
ERR_LDAPPWMOD_CANNOT_READ_PWMOD_RESPONSE_663=Unable to read the LDAP \
 password modify response:  %s
ERR_LDAPPWMOD_FAILED_664=The LDAP password modify operation failed \
 with result code %d
ERR_LDAPPWMOD_FAILURE_ERROR_MESSAGE_665=Error Message:  %s
ERR_LDAPPWMOD_FAILURE_MATCHED_DN_666=Matched DN:  %s
INFO_LDAPPWMOD_SUCCESSFUL_667=The LDAP password modify operation was \
 successful
INFO_LDAPPWMOD_ADDITIONAL_INFO_668=Additional Info:  %s
INFO_LDAPPWMOD_GENERATED_PASSWORD_669=Generated Password:  %s
ERR_LDAPPWMOD_UNRECOGNIZED_VALUE_TYPE_670=Unable to decode the \
 password modify response value because it contained an invalid element type \
 of %s
ERR_LDAPPWMOD_COULD_NOT_DECODE_RESPONSE_VALUE_671=Unable to decode the \
 password modify response value:  %s
INFO_COMPARE_CANNOT_BASE64_DECODE_ASSERTION_VALUE_673=The assertion value was \
 indicated to be base64-encoded, but an error occurred while trying to decode \
 the value
INFO_COMPARE_CANNOT_READ_ASSERTION_VALUE_FROM_FILE_674=Unable to read the \
 assertion value from the specified file:  %s
INFO_WAIT4DEL_DESCRIPTION_TARGET_FILE_675=Path to the file to \
 watch for deletion
INFO_WAIT4DEL_DESCRIPTION_LOG_FILE_676=Path to a file \
 containing log output to monitor
INFO_WAIT4DEL_DESCRIPTION_TIMEOUT_677=Maximum length of time in seconds \
 to wait for the target file to be deleted before exiting
INFO_WAIT4DEL_DESCRIPTION_HELP_678=Displays this usage information
WARN_WAIT4DEL_CANNOT_OPEN_LOG_FILE_681=WARNING:  Unable to open log \
 file %s for reading:  %s
ERR_LDAPCOMPARE_NO_DNS_682=No entry DNs provided for the compare \
 operation
INFO_BACKUPDB_TOOL_DESCRIPTION_683=This utility can be used to back up one or \
 more Directory Server backends
INFO_CONFIGDS_TOOL_DESCRIPTION_684=This utility can be used to define a base \
 configuration for the Directory Server
INFO_ENCPW_TOOL_DESCRIPTION_685=This utility can be used to encode user \
 passwords with a specified storage scheme, or to determine whether a given \
 clear-text value matches a provided encoded password
INFO_LDIFEXPORT_TOOL_DESCRIPTION_686=This utility can be used to export data \
 from a Directory Server backend in LDIF form
INFO_LDIFIMPORT_TOOL_DESCRIPTION_687=This utility can be used to import LDIF \
 data into a Directory Server backend
INFO_INSTALLDS_TOOL_DESCRIPTION_688=This utility can be used to setup the \
 Directory Server
INFO_LDAPCOMPARE_TOOL_DESCRIPTION_689=This utility can be used to perform \
 LDAP compare operations in the Directory Server
INFO_LDAPDELETE_TOOL_DESCRIPTION_690=This utility can be used to perform LDAP \
 delete operations in the Directory Server
INFO_LDAPMODIFY_TOOL_DESCRIPTION_691=This utility can be used to perform LDAP \
 modify, add, delete, and modify DN operations in the Directory Server
INFO_LDAPPWMOD_TOOL_DESCRIPTION_692=This utility can be used to perform LDAP \
 password modify operations in the Directory Server
INFO_LDAPSEARCH_TOOL_DESCRIPTION_693=This utility can be used to perform LDAP \
 search operations in the Directory Server
INFO_LDIFDIFF_TOOL_DESCRIPTION_694=This utility can be used to compare two \
 LDIF files and report the differences in LDIF format
INFO_LDIFMODIFY_TOOL_DESCRIPTION_695=This utility can be used to apply a set \
 of modify, add, and delete operations against data in an LDIF file
INFO_LDIFSEARCH_TOOL_DESCRIPTION_696=This utility can be used to perform \
 search operations against data in an LDIF file
INFO_MAKELDIF_TOOL_DESCRIPTION_697=This utility can be used to generate LDIF \
 data based on a definition in a template file
INFO_RESTOREDB_TOOL_DESCRIPTION_698=This utility can be used to restore a \
 backup of a Directory Server backend
INFO_STOPDS_TOOL_DESCRIPTION_699=This utility can be used to request that the \
 Directory Server stop running or perform a restart. \
 When run without connection options, \
 this utility sends a signal to the OpenDJ process to stop the server. \
 When run with connection options, \
 this utility connects to the OpenDJ administration port and \
 creates a shutdown task to stop the server
INFO_VERIFYINDEX_TOOL_DESCRIPTION_700=This utility can be used to ensure that \
 index data is consistent within an indexed backend database
INFO_WAIT4DEL_TOOL_DESCRIPTION_701=This utility can be used to wait for a \
 file to be removed from the filesystem
ERR_TOOL_CONFLICTING_ARGS_702=You may not provide both the --%s and \
 the --%s arguments
ERR_LDAPCOMPARE_NO_ATTR_703=No attribute was specified to use as the \
 target for the comparison
ERR_LDAPCOMPARE_INVALID_ATTR_STRING_704=Invalid attribute string '%s'. \
 The attribute string must be in one of the following forms: \
 'attribute:value', 'attribute::base64value', or 'attribute:<valueFilePath'
ERR_TOOL_INVALID_CONTROL_STRING_705=Invalid control specification '%s'
ERR_TOOL_SASLEXTERNAL_NEEDS_SSL_OR_TLS_706=SASL EXTERNAL \
 authentication may only be requested if SSL or StartTLS is used
ERR_TOOL_SASLEXTERNAL_NEEDS_KEYSTORE_707=SASL EXTERNAL authentication \
 may only be used if a client certificate key store is specified
INFO_LDAPSEARCH_PSEARCH_CHANGE_TYPE_708=# Persistent search change type:  %s
INFO_LDAPSEARCH_PSEARCH_PREVIOUS_DN_709=# Persistent search previous entry \
 DN:  %s
INFO_LDAPSEARCH_ACCTUSABLE_HEADER_710=# Account Usability Response Control
INFO_LDAPSEARCH_ACCTUSABLE_IS_USABLE_711=#   The account is usable
INFO_LDAPSEARCH_ACCTUSABLE_TIME_UNTIL_EXPIRATION_712=#   Time until password \
 expiration:  %s
INFO_LDAPSEARCH_ACCTUSABLE_NOT_USABLE_713=#   The account is not usable
INFO_LDAPSEARCH_ACCTUSABLE_ACCT_INACTIVE_714=#   The account has been \
 deactivated
INFO_LDAPSEARCH_ACCTUSABLE_PW_RESET_715=#   The password has been reset
INFO_LDAPSEARCH_ACCTUSABLE_PW_EXPIRED_716=#   The password has expired
INFO_LDAPSEARCH_ACCTUSABLE_REMAINING_GRACE_717=#   Number of grace logins \
 remaining:  %d
INFO_LDAPSEARCH_ACCTUSABLE_LOCKED_718=#   The account is locked
INFO_LDAPSEARCH_ACCTUSABLE_TIME_UNTIL_UNLOCK_719=#   Time until the account \
 is unlocked:  %s
INFO_DESCRIPTION_KEYSTOREPASSWORD_FILE_720=Certificate key store PIN file
INFO_DESCRIPTION_TRUSTSTOREPASSWORD_721=Certificate trust store PIN
INFO_DESCRIPTION_TRUSTSTOREPASSWORD_FILE_722=Certificate trust store PIN file
INFO_LISTBACKENDS_TOOL_DESCRIPTION_723=This utility can be used to list the \
 backends and base DNs configured in the Directory Server
INFO_LISTBACKENDS_DESCRIPTION_BACKEND_ID_726=Backend ID of the backend for \
 which to list the base DNs
INFO_LISTBACKENDS_DESCRIPTION_BASE_DN_727=Base DN for which to list the \
 backend ID
INFO_LISTBACKENDS_DESCRIPTION_HELP_728=Display this usage information
ERR_LISTBACKENDS_CANNOT_GET_BACKENDS_734=An error occurred while \
 trying to read backend information from the server configuration:  %s
ERR_LISTBACKENDS_INVALID_DN_735=The provided base DN value '%s' could \
 not be parsed as a valid DN:  %s
INFO_LISTBACKENDS_NOT_BASE_DN_736=The provided DN '%s' is not a base DN for \
 any backend configured in the Directory Server
INFO_LISTBACKENDS_NO_BACKEND_FOR_DN_737=The provided DN '%s' is not below any \
 base DN for any of the backends configured in the Directory Server
INFO_LISTBACKENDS_DN_BELOW_BASE_738=The provided DN '%s' is below '%s' which \
 is configured as a base DN for backend '%s'
INFO_LISTBACKENDS_BASE_FOR_ID_739=The provided DN '%s' is a base DN for \
 backend '%s'
INFO_LISTBACKENDS_LABEL_BACKEND_ID_740=Backend ID
INFO_LISTBACKENDS_LABEL_BASE_DN_741=Base DN
ERR_LISTBACKENDS_NO_SUCH_BACKEND_742=There is no backend with ID '%s' \
 in the server configuration
ERR_LISTBACKENDS_NO_VALID_BACKENDS_743=None of the provided backend \
 IDs exist in the server configuration
ERR_ENCPW_INVALID_ENCODED_USERPW_748=The provided password is not a \
 valid encoded user password value:  %s
INFO_ENCPW_DESCRIPTION_USE_COMPARE_RESULT_749=Use the LDAP compare result as \
 an exit code for the password comparison
INFO_DESCRIPTION_COUNT_ENTRIES_750=Count the number of entries returned by \
 the server
INFO_LDAPSEARCH_MATCHING_ENTRY_COUNT_751=# Total number of matching entries: \
 %d
INFO_INSTALLDS_DESCRIPTION_CLI_752=Use the command line install. \
 If not specified the graphical interface will be launched.  The rest of the \
 options (excluding help and version) will only be taken into account if this \
 option is specified
INFO_INSTALLDS_DESCRIPTION_SAMPLE_DATA_753=Specifies that the database should \
 be populated with the specified number of sample entries
INFO_INSTALLDS_HEADER_POPULATE_TYPE_754=Options for populating the database:
INFO_INSTALLDS_POPULATE_OPTION_BASE_ONLY_755=Only create the base entry
INFO_INSTALLDS_POPULATE_OPTION_LEAVE_EMPTY_756=Leave the database empty
INFO_INSTALLDS_POPULATE_OPTION_IMPORT_LDIF_757=Import data from an LDIF file
INFO_INSTALLDS_POPULATE_OPTION_GENERATE_SAMPLE_758=Load \
 automatically-generated sample data
ERR_INSTALLDS_NO_SUCH_LDIF_FILE_780=ERROR:  The specified LDIF file %s \
 does not exist
INFO_INSTALLDS_PROMPT_NUM_ENTRIES_781=Please specify the number of user \
 entries to generate:
INFO_LDAPPWMOD_DESCRIPTION_KEYSTORE_PIN_783=The PIN needed to access the \
 contents of the key store
INFO_LDAPPWMOD_DESCRIPTION_TRUSTSTORE_PIN_784=The PIN needed to access the \
 contents of the trust store
INFO_LDIFEXPORT_DESCRIPTION_EXCLUDE_OPERATIONAL_785=Exclude operational \
 attributes from the LDIF export
INFO_LDAPPWMOD_PWPOLICY_WARNING_786=Password Policy Warning:  %s = %d
INFO_LDAPPWMOD_PWPOLICY_ERROR_787=Password Policy Error:  %s
ERR_LDAPPWMOD_CANNOT_DECODE_PWPOLICY_CONTROL_788=Unable to decode the \
 password policy response control:  %s
ERR_LDAPAUTH_CONNECTION_CLOSED_WITHOUT_BIND_RESPONSE_789=The \
 connection to the Directory Server was closed before the bind response could \
 be read
INFO_DESCRIPTION_SIMPLE_PAGE_SIZE_790=Use the simple paged results control \
 with the given page size
ERR_PAGED_RESULTS_REQUIRES_SINGLE_FILTER_791=The simple paged results \
 control may only be used with a single search filter
ERR_PAGED_RESULTS_CANNOT_DECODE_792=Unable to decode the simple paged \
 results control from the search response:  %s
ERR_PAGED_RESULTS_RESPONSE_NOT_FOUND_793=The simple paged results \
 response control was not found in the search result done message from the \
 server
INFO_LDIFDIFF_DESCRIPTION_SINGLE_VALUE_CHANGES_794=Each \
 attribute-level change should be written as a separate modification per \
 attribute value rather than one modification per entry
ERR_PROMPTTM_REJECTING_CLIENT_CERT_795=Rejecting client certificate \
 chain because the prompt trust manager may only be used to trust server \
 certificates
WARN_PROMPTTM_NO_SERVER_CERT_CHAIN_796=WARNING:  The server did not \
 present a certificate chain.  Do you still wish to attempt connecting to the \
 target server?
WARN_PROMPTTM_CERT_EXPIRED_797=WARNING:  The server certificate is \
 expired (expiration time:  %s)
WARN_PROMPTTM_CERT_NOT_YET_VALID_798=WARNING:  The server certificate \
 will not be valid until %s
INFO_PROMPTTM_SERVER_CERT_799=The server is using the following certificate: \
 \n    Subject DN:  %s\n    Issuer DN:  %s\n    Validity:  %s through %s\nDo \
 you wish to trust this certificate and continue connecting to the server?
INFO_PROMPTTM_YESNO_PROMPT_800=Please enter "yes" or "no":
ERR_PROMPTTM_USER_REJECTED_801=The server certificate has been \
 rejected by the user
INFO_STOPDS_SERVER_ALREADY_STOPPED_802=Server already stopped
INFO_STOPDS_GOING_TO_STOP_803=Stopping Server...
INFO_STOPDS_CHECK_STOPPABILITY_804=Used to determine whether the server can \
 be stopped or not and the mode to be used to stop it
INFO_DESCRIPTION_CERT_NICKNAME_805=Nickname of certificate for SSL client \
 authentication
INFO_CONFIGDS_DESCRIPTION_JMX_PORT_806=Port on which the \
 Directory Server should listen for JMX communication
ERR_CONFIGDS_CANNOT_UPDATE_JMX_PORT_807=An error occurred while \
 attempting to update the port on which to listen for JMX communication:  %s
INFO_INSTALLDS_DESCRIPTION_JMXPORT_808=Port on which the \
 Directory Server should listen for JMX communication
INFO_INSTALLDS_PROMPT_JMXPORT_809=On which port would you like the Directory \
 Server to accept connections from JMX clients?
ERR_TOOL_RESULT_CODE_810=Result Code:  %d (%s)
ERR_TOOL_ERROR_MESSAGE_811=Additional Information:  %s
ERR_TOOL_MATCHED_DN_812=Matched DN:  %s
ERR_WINDOWS_SERVICE_NOT_FOUND_813=Could not find the service name for \
 the server
ERR_WINDOWS_SERVICE_START_ERROR_814=An unexpected error occurred \
 starting the server as a windows service
ERR_WINDOWS_SERVICE_STOP_ERROR_815=An unexpected error occurred \
 stopping the server windows service
INFO_CONFIGURE_WINDOWS_SERVICE_TOOL_DESCRIPTION_816=This utility can be used \
 to configure the server as a Windows service
INFO_CONFIGURE_WINDOWS_SERVICE_DESCRIPTION_SHOWUSAGE_817=Display this usage \
 information
INFO_CONFIGURE_WINDOWS_SERVICE_DESCRIPTION_ENABLE_818=Enables the server as a \
 Windows service
INFO_CONFIGURE_WINDOWS_SERVICE_DESCRIPTION_DISABLE_819=Disables the server as \
 a Windows service and stops the server
INFO_CONFIGURE_WINDOWS_SERVICE_DESCRIPTION_STATE_820=Provides information \
 about the state of the server as a Windows service
ERR_CONFIGURE_WINDOWS_SERVICE_TOO_MANY_ARGS_823=You can only provide \
 one of the following arguments:\nenableService, disableService, serviceState \
 or cleanupService
ERR_CONFIGURE_WINDOWS_SERVICE_TOO_FEW_ARGS_824=You must provide at \
 least one of the following arguments:\nenableService, disableService or \
 serviceState or cleanupService
INFO_WINDOWS_SERVICE_NAME_825=%s
INFO_WINDOWS_SERVICE_DESCRIPTION_826=Next Generation Directory \
 Server.  Installation path: %s
INFO_WINDOWS_SERVICE_SUCCESSULLY_ENABLED_827=The server was successfully \
 enabled to run as a Windows service
INFO_WINDOWS_SERVICE_ALREADY_ENABLED_828=The server was already enabled to run \
 as a Windows service
ERR_WINDOWS_SERVICE_NAME_ALREADY_IN_USE_829=The server could not be \
 enabled to run as a Windows service.  The service name is already in use
ERR_WINDOWS_SERVICE_ENABLE_ERROR_830=An unexpected error occurred \
 trying to enable the server as a Windows service.%nCheck that you have \
 administrator rights (only Administrators can enable the server to run as a \
 Windows Service)
INFO_WINDOWS_SERVICE_SUCCESSULLY_DISABLED_831=The server was successfully \
 disabled as a Windows service
INFO_WINDOWS_SERVICE_ALREADY_DISABLED_832=The server was already disabled as a \
 Windows service
WARN_WINDOWS_SERVICE_MARKED_FOR_DELETION_833=The server has been marked \
 for deletion as a Windows Service
ERR_WINDOWS_SERVICE_DISABLE_ERROR_834=An unexpected error occurred \
 trying to disable the server as a Windows service%nCheck that you have \
 administrator rights (only Administrators can disable the server as a Windows \
 Service)
INFO_WINDOWS_SERVICE_ENABLED_835=The server is enabled as a Windows service.  \
 The service name for the server is: %s
INFO_WINDOWS_SERVICE_DISABLED_836=The server is disabled as a Windows service
ERR_WINDOWS_SERVICE_STATE_ERROR_837=An unexpected error occurred \
 trying to retrieve the state of the server as a Windows service
INFO_STOPDS_DESCRIPTION_WINDOWS_NET_STOP_838=Used by the window service code \
 to inform that stop-ds is being called from the window services after a call \
 to net stop
INFO_WAIT4DEL_DESCRIPTION_OUTPUT_FILE_839=Path to a file to \
 which the command will write the output
WARN_WAIT4DEL_CANNOT_OPEN_OUTPUT_FILE_840=WARNING:  Unable to open \
 output file %s for writing:  %s
INFO_INSTALLDS_PROMPT_ENABLE_SERVICE_842=Enable the server to run as a Windows \
 Service?
INFO_INSTALLDS_DESCRIPTION_ENABLE_WINDOWS_SERVICE_843=Enable the server to run \
 as a Windows Service
INFO_CONFIGURE_WINDOWS_SERVICE_DESCRIPTION_CLEANUP_844=Allows to disable the \
 server service and to clean up the windows registry information associated \
 with the provided service name
INFO_WINDOWS_SERVICE_CLEANUP_SUCCESS_845=Clean up of service %s was \
 successful
ERR_WINDOWS_SERVICE_CLEANUP_NOT_FOUND_846=Could not find the service \
 with name %s
WARN_WINDOWS_SERVICE_CLEANUP_MARKED_FOR_DELETION_847=Service %s has \
 been marked for deletion
ERR_WINDOWS_SERVICE_CLEANUP_ERROR_848=An unexpected error occurred \
 cleaning up the service %s
INFO_REBUILDINDEX_TOOL_DESCRIPTION_849=This utility can be used to rebuild \
 index data within an indexed backend database
INFO_REBUILDINDEX_DESCRIPTION_BASE_DN_850=Base DN of a backend \
 supporting indexing. Rebuild is performed on indexes within the scope of the \
 given base DN
INFO_REBUILDINDEX_DESCRIPTION_INDEX_NAME_851=Names of index(es) \
 to rebuild. For an attribute index this is simply an attribute name.  At \
 least one index must be specified for rebuild. Cannot be used with the \
 "--rebuildAll" option
ERR_REBUILDINDEX_ERROR_DURING_REBUILD_852=An error occurred while \
 attempting to perform index rebuild:  %s
ERR_REBUILDINDEX_WRONG_BACKEND_TYPE_853=The backend does not support \
 rebuilding of indexes
ERR_REBUILDINDEX_REQUIRES_AT_LEAST_ONE_INDEX_854=At least one index \
 must be specified for the rebuild process
ERR_REBUILDINDEX_CANNOT_EXCLUSIVE_LOCK_BACKEND_855=An error occurred \
 while attempting to acquire a exclusive lock for backend %s:  %s.  This \
 generally means that some other process has an lock on this backend or the \
 server is running with this backend online. The rebuild process cannot \
 continue
WARN_REBUILDINDEX_CANNOT_UNLOCK_BACKEND_856=An error occurred while \
 attempting to release the shared lock for backend %s:  %s.  This lock should \
 automatically be cleared when the rebuild process exits, so no further action \
 should be required
ERR_REBUILDINDEX_CANNOT_SHARED_LOCK_BACKEND_857=An error occurred \
 while attempting to acquire a shared lock for backend %s:  %s.  This \
 generally means that some other process has an exclusive lock on this backend \
 (e.g., an LDIF import or a restore). The rebuild process cannot continue
INFO_CONFIGDS_DESCRIPTION_LDAPS_PORT_858=Port on which the \
 Directory Server should listen for LDAPS communication
ERR_CONFIGDS_CANNOT_UPDATE_LDAPS_PORT_859=An error occurred while \
 attempting to update the port on which to listen for LDAPS communication:  %s
INFO_CONFIGDS_DESCRIPTION_ENABLE_START_TLS_860=Specifies whether to enable or \
 not StartTLS
INFO_CONFIGDS_DESCRIPTION_KEYMANAGER_PROVIDER_DN_861=DN of the \
 key manager provider to use for SSL and/or StartTLS
INFO_CONFIGDS_DESCRIPTION_TRUSTMANAGER_PROVIDER_DN_862=DN of \
 the trust manager provider to use for SSL and/or StartTLS
ERR_CONFIGDS_CANNOT_PARSE_KEYMANAGER_PROVIDER_DN_863=An error occurred \
 while attempting to parse key manager provider DN value "%s" as a DN:  %s
ERR_CONFIGDS_CANNOT_PARSE_TRUSTMANAGER_PROVIDER_DN_864=An error \
 occurred while attempting to parse trust manager provider DN value "%s" as a \
 DN:  %s
ERR_CONFIGDS_CANNOT_ENABLE_STARTTLS_865=An error occurred while \
 attempting to enable StartTLS: %s
ERR_CONFIGDS_CANNOT_ENABLE_KEYMANAGER_866=An error occurred while \
 attempting to enable key manager provider entry: %s
ERR_CONFIGDS_CANNOT_ENABLE_TRUSTMANAGER_867=An error occurred while \
 attempting to enable trust manager provider entry: %s
ERR_CONFIGDS_CANNOT_UPDATE_KEYMANAGER_REFERENCE_868=An error occurred \
 while attempting to update the key manager provider DN used for LDAPS \
 communication: %s
ERR_CONFIGDS_CANNOT_UPDATE_TRUSTMANAGER_REFERENCE_869=An error \
 occurred while attempting to update the trust manager provider DN used for \
 LDAPS communication: %s
INFO_CONFIGDS_DESCRIPTION_KEYMANAGER_PATH_870=Path of the \
 key store to be used by the key manager provider
INFO_CONFIGDS_DESCRIPTION_CERTNICKNAME_871=Nickname of the \
 certificate that the connection handler should use when accepting SSL-based \
 connections or performing StartTLS negotiation
ERR_CONFIGDS_KEYMANAGER_PROVIDER_DN_REQUIRED_872=ERROR:  You must \
 provide the %s argument when providing the %s argument
ERR_CONFIGDS_CANNOT_UPDATE_CERT_NICKNAME_873=An error occurred while \
 attempting to update the nickname of the certificate that the connection \
 handler should use when accepting SSL-based connections or performing \
 StartTLS negotiation: %s
INFO_LDAPMODIFY_DESCRIPTION_FILENAME_874=LDIF file containing \
 the changes to apply
ERR_MAKELDIF_TEMPLATE_INVALID_PARENT_TEMPLATE_875=The parent template %s \
 referenced on line %d for template %s is invalid because the referenced \
 parent template is not defined before the template that extends it
INFO_DESCRIPTION_SORT_ORDER_876=Sort the results using the provided sort \
 order
ERR_LDAP_SORTCONTROL_INVALID_ORDER_877=The provided sort order was \
 invalid:  %s
INFO_DESCRIPTION_VLV_878=Use the virtual list view control to retrieve the \
 specified results page
ERR_LDAPSEARCH_VLV_REQUIRES_SORT_879=If the --%s argument is provided, \
 then the --%s argument must also be given
ERR_LDAPSEARCH_VLV_INVALID_DESCRIPTOR_880=The provided virtual list view \
 descriptor was invalid.  It must be a value in the form \
 'beforeCount:afterCount:offset:contentCount' (where offset specifies the \
 index of the target entry and contentCount specifies the estimated total \
 number of results or zero if it is not known), or \
 'beforeCount:afterCount:assertionValue' (where the entry should be the first \
 entry whose primary sort value is greater than or equal to the provided \
 assertionValue).  In either case, beforeCount is the number of entries to \
 return before the target value and afterCount is the number of entries to \
 return after the target value
WARN_LDAPSEARCH_SORT_ERROR_881=# Server-side sort failed:  %s
WARN_LDAPSEARCH_CANNOT_DECODE_SORT_RESPONSE_882=# Unable to decode the \
 server-side sort response:  %s
INFO_LDAPSEARCH_VLV_TARGET_OFFSET_883=# VLV Target Offset:  %d
INFO_LDAPSEARCH_VLV_CONTENT_COUNT_884=# VLV Content Count:  %d
WARN_LDAPSEARCH_VLV_ERROR_885=# Virtual list view processing failed: \
 %s
WARN_LDAPSEARCH_CANNOT_DECODE_VLV_RESPONSE_886=# Unable to decode the \
 virtual list view response:  %s
ERR_LDIFIMPORT_CANNOT_READ_FILE_887=The specified LDIF file %s cannot \
 be read
INFO_DESCRIPTION_EFFECTIVERIGHTS_USER_888=Use geteffectiverights control with \
 the provided authzid
INFO_DESCRIPTION_EFFECTIVERIGHTS_ATTR_889=Specifies geteffectiverights \
 control specific attribute list
ERR_EFFECTIVERIGHTS_INVALID_AUTHZID_890=The authorization ID "%s" \
 contained in the geteffectiverights control is invalid because it does not \
 start with "dn:" to indicate a user DN
INFO_DESCRIPTION_PRODUCT_VERSION_891=Display Directory Server version \
 information
INFO_DESCRIPTION_QUIET_1075=Use quiet mode
INFO_DESCRIPTION_SCRIPT_FRIENDLY_1076=Use script-friendly mode
INFO_DESCRIPTION_NO_PROMPT_1077=Use non-interactive mode.  If data in \
the command is missing, the user is not prompted and the tool will fail
INFO_PWPSTATE_TOOL_DESCRIPTION_1094=This utility can be used to retrieve and \
 manipulate the values of password policy state variables
INFO_PWPSTATE_DESCRIPTION_HOST_1095=Directory server hostname or IP address
INFO_PWPSTATE_DESCRIPTION_PORT_1096=Directory server administration port number
INFO_PWPSTATE_DESCRIPTION_BINDDN_1099=The DN to use to bind to the server
INFO_PWPSTATE_DESCRIPTION_BINDPW_1100=The password to use to bind to the \
 server
INFO_PWPSTATE_DESCRIPTION_BINDPWFILE_1101=The path to the file containing the \
 bind password
INFO_PWPSTATE_DESCRIPTION_TARGETDN_1102=The DN of the user entry for which to \
 get and set password policy state information
INFO_PWPSTATE_DESCRIPTION_SASLOPTIONS_1103=SASL bind options
INFO_PWPSTATE_DESCRIPTION_TRUST_ALL_1104=Trust all server SSL certificates
INFO_PWPSTATE_DESCRIPTION_KSFILE_1105=Certificate key store path
INFO_PWPSTATE_DESCRIPTION_KSPW_1106=Certificate key store PIN
INFO_PWPSTATE_DESCRIPTION_KSPWFILE_1107=Certificate key store PIN file
INFO_PWPSTATE_DESCRIPTION_TSFILE_1108=Certificate trust store path
INFO_PWPSTATE_DESCRIPTION_TSPW_1109=Certificate trust store PIN
INFO_PWPSTATE_DESCRIPTION_TSPWFILE_1110=Certificate trust store PIN file
INFO_PWPSTATE_DESCRIPTION_SHOWUSAGE_1111=Display this usage information
INFO_DESCRIPTION_PWPSTATE_GET_ALL_1112=Display all password policy state \
 information for the user
INFO_DESCRIPTION_PWPSTATE_GET_PASSWORD_POLICY_DN_1113=Display the DN of the \
 password policy for the user
INFO_DESCRIPTION_PWPSTATE_GET_ACCOUNT_DISABLED_STATE_1114=Display information \
 about whether the user account has been administratively disabled
INFO_DESCRIPTION_PWPSTATE_SET_ACCOUNT_DISABLED_STATE_1115=Specify whether the \
 user account has been administratively disabled
INFO_DESCRIPTION_OPERATION_BOOLEAN_VALUE_1116='true' to indicate that the \
 account is disabled, or 'false' to indicate that it is not disabled
INFO_DESCRIPTION_PWPSTATE_CLEAR_ACCOUNT_DISABLED_STATE_1117=Clear account \
 disabled state information from the user account
INFO_DESCRIPTION_PWPSTATE_GET_ACCOUNT_EXPIRATION_TIME_1118=Display when the \
 user account will expire
INFO_DESCRIPTION_PWPSTATE_SET_ACCOUNT_EXPIRATION_TIME_1119=Specify when the \
 user account will expire
INFO_DESCRIPTION_OPERATION_TIME_VALUE_1120=A timestamp value using the \
 generalized time syntax
INFO_DESCRIPTION_PWPSTATE_CLEAR_ACCOUNT_EXPIRATION_TIME_1121=Clear account \
 expiration time information from the user account
INFO_DESCRIPTION_PWPSTATE_GET_SECONDS_UNTIL_ACCOUNT_EXPIRATION_1122=Display \
 the length of time in seconds until the user account expires
INFO_DESCRIPTION_PWPSTATE_GET_PASSWORD_CHANGED_TIME_1123=Display the time \
 that the user's password was last changed
INFO_DESCRIPTION_PWPSTATE_SET_PASSWORD_CHANGED_TIME_1124=Specify the time \
 that the user's password was last changed.  This should be used only for \
 testing purposes
INFO_DESCRIPTION_PWPSTATE_CLEAR_PASSWORD_CHANGED_TIME_1125=Clear information \
 about the time that the user's password was last changed.  This should be \
 used only for testing purposes
INFO_DESCRIPTION_PWPSTATE_GET_PASSWORD_EXPIRATION_WARNED_TIME_1126=Display \
 the time that the user first received an expiration warning notice
INFO_DESCRIPTION_PWPSTATE_SET_PASSWORD_EXPIRATION_WARNED_TIME_1127=Specify \
 the time that the user first received an expiration warning notice.  This \
 should be used only for testing purposes
INFO_DESCRIPTION_PWPSTATE_CLEAR_PASSWORD_EXPIRATION_WARNED_TIME_1128=Clear \
 information about the time that the user first received an expiration warning \
 notice.  This should be used only for testing purposes
INFO_DESCRIPTION_PWPSTATE_GET_SECONDS_UNTIL_PASSWORD_EXP_1129=Display length \
 of time in seconds until the user's password expires
INFO_DESCRIPTION_PWPSTATE_GET_SECONDS_UNTIL_PASSWORD_EXP_WARNING_1130=Display \
 the length of time in seconds until the user should start receiving password \
 expiration warning notices
INFO_DESCRIPTION_PWPSTATE_GET_AUTH_FAILURE_TIMES_1131=Display the \
 authentication failure times for the user
INFO_DESCRIPTION_PWPSTATE_ADD_AUTH_FAILURE_TIME_1132=Add an authentication \
 failure time to the user account.  This should be used only for testing \
 purposes
INFO_DESCRIPTION_PWPSTATE_SET_AUTH_FAILURE_TIMES_1133=Specify the \
 authentication failure times for the user.  This should be used only for \
 testing purposes
INFO_DESCRIPTION_OPERATION_TIME_VALUES_1134=A timestamp value using the \
 generalized time syntax.  Multiple timestamp values may be given by providing \
 this argument multiple times
INFO_DESCRIPTION_PWPSTATE_CLEAR_AUTH_FAILURE_TIMES_1135=Clear authentication \
 failure time information from the user's account.  This should be used only \
 for testing purposes
INFO_DESCRIPTION_PWPSTATE_GET_SECONDS_UNTIL_AUTH_FAILURE_UNLOCK_1136=Display \
 the length of time in seconds until the authentication failure lockout \
 expires
INFO_DESCRIPTION_PWPSTATE_GET_REMAINING_AUTH_FAILURE_COUNT_1137=Display the \
 number of remaining authentication failures until the user's account is \
 locked
INFO_DESCRIPTION_PWPSTATE_GET_LAST_LOGIN_TIME_1138=Display the time that the \
 user last authenticated to the server
INFO_DESCRIPTION_PWPSTATE_SET_LAST_LOGIN_TIME_1139=Specify the time that the \
 user last authenticated to the server.  This should be used only for testing \
 purposes
INFO_DESCRIPTION_PWPSTATE_CLEAR_LAST_LOGIN_TIME_1140=Clear the time that the \
 user last authenticated to the server.  This should be used only for testing \
 purposes
INFO_DESCRIPTION_PWPSTATE_GET_SECONDS_UNTIL_IDLE_LOCKOUT_1141=Display the \
 length of time in seconds until user's account is locked because it has \
 remained idle for too long
INFO_DESCRIPTION_PWPSTATE_GET_PASSWORD_RESET_STATE_1142=Display information \
 about whether the user will be required to change his or her password on the \
 next successful authentication
INFO_DESCRIPTION_PWPSTATE_SET_PASSWORD_RESET_STATE_1143=Specify whether the \
 user will be required to change his or her password on the next successful \
 authentication.  This should be used only for testing purposes
INFO_DESCRIPTION_PWPSTATE_CLEAR_PASSWORD_RESET_STATE_1144=Clear information \
 about whether the user will be required to change his or her password on the \
 next successful authentication.  This should be used only for testing \
 purposes
INFO_DESCRIPTION_PWPSTATE_GET_SECONDS_UNTIL_RESET_LOCKOUT_1145=Display the \
 length of time in seconds until user's account is locked because the user \
 failed to change the password in a timely manner after an administrative \
 reset
INFO_DESCRIPTION_PWPSTATE_GET_GRACE_LOGIN_USE_TIMES_1146=Display the grace \
 login use times for the user
INFO_DESCRIPTION_PWPSTATE_ADD_GRACE_LOGIN_USE_TIME_1147=Add a grace login use \
 time to the user account.  This should be used only for testing purposes
INFO_DESCRIPTION_PWPSTATE_SET_GRACE_LOGIN_USE_TIMES_1148=Specify the grace \
 login use times for the user.  This should be used only for testing purposes
INFO_DESCRIPTION_PWPSTATE_CLEAR_GRACE_LOGIN_USE_TIMES_1149=Clear the set of \
 grace login use times for the user.  This should be used only for testing \
 purposes
INFO_DESCRIPTION_PWPSTATE_GET_REMAINING_GRACE_LOGIN_COUNT_1150=Display the \
 number of grace logins remaining for the user
INFO_DESCRIPTION_PWPSTATE_GET_PW_CHANGED_BY_REQUIRED_TIME_1151=Display the \
 required password change time with which the user last complied
INFO_DESCRIPTION_PWPSTATE_SET_PW_CHANGED_BY_REQUIRED_TIME_1152=Specify the \
 required password change time with which the user last complied.  This should \
 be used only for testing purposes
INFO_DESCRIPTION_PWPSTATE_CLEAR_PW_CHANGED_BY_REQUIRED_TIME_1153=Clear \
 information about the required password change time with which the user last \
 complied.  This should be used only for testing purposes
INFO_DESCRIPTION_PWPSTATE_GET_SECONDS_UNTIL_REQUIRED_CHANGE_TIME_1154=Display \
 the length of time in seconds that the user has remaining to change his or \
 her password before the account becomes locked due to the required change \
 time
ERR_PWPSTATE_NO_SUBCOMMAND_1155=No subcommand was provided to indicate \
 which password policy state operation should be performed
ERR_PWPSTATE_INVALID_BOOLEAN_VALUE_1156=The provided value '%s' was \
 invalid for the requested operation.  A Boolean value of either 'true' or \
 'false' was expected
ERR_PWPSTATE_NO_BOOLEAN_VALUE_1157=No value was specified, but the \
 requested operation requires a Boolean value of either 'true' or 'false'
ERR_PWPSTATE_INVALID_SUBCOMMAND_1158=Unrecognized subcommand '%s'
ERR_PWPSTATE_CANNOT_SEND_REQUEST_EXTOP_1159=An error occurred while \
 attempting to send the request to the server:  %s
ERR_PWPSTATE_CONNECTION_CLOSED_READING_RESPONSE_1160=The Directory \
 Server closed the connection before the response could be read
ERR_PWPSTATE_REQUEST_FAILED_1161=The server was unable to process the \
 request:  result code %d (%s), error message '%s'
ERR_PWPSTATE_CANNOT_DECODE_RESPONSE_MESSAGE_1162=Unable \
 to decode the response message from the server:  %s
ERR_PWPSTATE_CANNOT_DECODE_RESPONSE_OP_1163=Unable to decode \
 information about an operation contained in the response:  %s
INFO_PWPSTATE_LABEL_PASSWORD_POLICY_DN_1164=Password Policy DN
INFO_PWPSTATE_LABEL_ACCOUNT_DISABLED_STATE_1165=Account Is Disabled
INFO_PWPSTATE_LABEL_ACCOUNT_EXPIRATION_TIME_1166=Account Expiration Time
INFO_PWPSTATE_LABEL_SECONDS_UNTIL_ACCOUNT_EXPIRATION_1167=Seconds Until \
 Account Expiration
INFO_PWPSTATE_LABEL_PASSWORD_CHANGED_TIME_1168=Password Changed Time
INFO_PWPSTATE_LABEL_PASSWORD_EXPIRATION_WARNED_TIME_1169=Password Expiration \
 Warned Time
INFO_PWPSTATE_LABEL_SECONDS_UNTIL_PASSWORD_EXPIRATION_1170=Seconds Until \
 Password Expiration
INFO_PWPSTATE_LABEL_SECONDS_UNTIL_PASSWORD_EXPIRATION_WARNING_1171=Seconds \
 Until Password Expiration Warning
INFO_PWPSTATE_LABEL_AUTH_FAILURE_TIMES_1172=Authentication Failure Times
INFO_PWPSTATE_LABEL_SECONDS_UNTIL_AUTH_FAILURE_UNLOCK_1173=Seconds Until \
 Authentication Failure Unlock
INFO_PWPSTATE_LABEL_REMAINING_AUTH_FAILURE_COUNT_1174=Remaining \
 Authentication Failure Count
INFO_PWPSTATE_LABEL_LAST_LOGIN_TIME_1175=Last Login Time
INFO_PWPSTATE_LABEL_SECONDS_UNTIL_IDLE_LOCKOUT_1176=Seconds Until Idle \
 Account Lockout
INFO_PWPSTATE_LABEL_PASSWORD_RESET_STATE_1177=Password Is Reset
INFO_PWPSTATE_LABEL_SECONDS_UNTIL_PASSWORD_RESET_LOCKOUT_1178=Seconds Until \
 Password Reset Lockout
INFO_PWPSTATE_LABEL_GRACE_LOGIN_USE_TIMES_1179=Grace Login Use Times
INFO_PWPSTATE_LABEL_REMAINING_GRACE_LOGIN_COUNT_1180=Remaining Grace Login \
 Count
INFO_PWPSTATE_LABEL_PASSWORD_CHANGED_BY_REQUIRED_TIME_1181=Password Changed \
 by Required Time
INFO_PWPSTATE_LABEL_SECONDS_UNTIL_REQUIRED_CHANGE_TIME_1182=Seconds Until \
 Required Change Time
ERR_PWPSTATE_INVALID_RESPONSE_OP_TYPE_1183=Unrecognized or invalid \
 operation type:  %s
ERR_PWPSTATE_MUTUALLY_EXCLUSIVE_ARGUMENTS_1184=ERROR:  You may not \
 provide both the %s and the %s arguments
ERR_PWPSTATE_CANNOT_INITIALIZE_SSL_1185=ERROR:  Unable to perform SSL \
 initialization:  %s
ERR_PWPSTATE_CANNOT_PARSE_SASL_OPTION_1186=ERROR:  The provided SASL \
 option string "%s" could not be parsed in the form "name=value"
ERR_PWPSTATE_NO_SASL_MECHANISM_1187=ERROR:  One or more SASL options \
 were provided, but none of them were the "mech" option to specify which SASL \
 mechanism should be used
ERR_PWPSTATE_CANNOT_DETERMINE_PORT_1188=ERROR:  Cannot parse the value \
 of the %s argument as an integer value between 1 and 65535:  %s
ERR_PWPSTATE_CANNOT_CONNECT_1189=ERROR:  Cannot establish a connection to \
 the Directory Server %s.  Verify that the server is running and that \
 the provided credentials are valid.  Details:  %s
INFO_UPGRADE_DESCRIPTION_NO_PROMPT_1191=Use non-interactive mode.  Prompt for \
 any required information rather than fail
INFO_LDIFIMPORT_DESCRIPTION_COUNT_REJECTS_1195=Count the number of entries \
 rejected by the server and return that value as the exit code (values > 255 \
 will be reduced to 255 due to exit code restrictions)
INFO_LDIFIMPORT_DESCRIPTION_SKIP_FILE_1197=Write skipped entries to the \
 specified file
ERR_LDIFIMPORT_CANNOT_OPEN_SKIP_FILE_1198=An error occurred while \
 trying to open the skip file %s for writing:  %s
INFO_VERIFYINDEX_DESCRIPTION_COUNT_ERRORS_1199=Count the number of errors \
 found during the verification and return that value as the exit code (values \
 > 255 will be reduced to 255 due to exit code restrictions)
INFO_PWPSTATE_LABEL_PASSWORD_HISTORY_1201=Password History
INFO_DESCRIPTION_PWPSTATE_GET_PASSWORD_HISTORY_1202=Display password history \
 state values for the user
INFO_DESCRIPTION_PWPSTATE_CLEAR_PASSWORD_HISTORY_1203=Clear password history \
 state values for the user.  This should be used only for testing purposes
ERR_CONFIGDS_PORT_ALREADY_SPECIFIED_1211=ERROR:  You have specified \
 the value %s for different ports
ERR_CLI_ERROR_PROPERTY_UNRECOGNIZED_1212=The property "%s" is not a \
 recognized property
ERR_CLI_ERROR_MISSING_PROPERTY_1213=The mandatory property "%s" is \
 missing
ERR_CLI_ERROR_INVALID_PROPERTY_VALUE_1214=The value "%s" specified for \
 the property "%s" is invalid
INFO_CLI_HEADING_PROPERTY_DEFAULT_VALUE_1215=Default value
INFO_LDIFIMPORT_DESCRIPTION_CLEAR_BACKEND_1251=Remove all entries for all \
 base DNs in the backend before importing
ERR_LDIFIMPORT_MISSING_BACKEND_ARGUMENT_1252=Neither the %s or the %s \
 argument was provided.  One of these arguments must be given to specify the \
 backend for the LDIF data to be imported to
ERR_LDIFIMPORT_MISSING_CLEAR_BACKEND_1253=Importing to a backend \
 without the append argument will remove all entries for all base DNs (%s) in \
 the backend. The %s argument must be given to continue with import
ERR_MAKELDIF_TAG_LIST_NO_ARGUMENTS_1291=The list tag on line %d of the \
 template file does not contain any arguments to specify the list values.  At \
 least one list value must be provided
WARN_MAKELDIF_TAG_LIST_INVALID_WEIGHT_1292=The list tag on line %d of \
 the template file contains item '%s' that includes a semicolon but that \
 semicolon is not followed by an integer.  The semicolon will be assumed to be \
 part of the value and not a delimiter to separate the value from its relative \
 weight
ERR_INITIALIZE_SERVER_ROOT_1293=An unexpected error occurred \
  attempting to set the server's root directory to %s: %s
ERR_LDAP_CONN_MUTUALLY_EXCLUSIVE_ARGUMENTS_1294=ERROR:  You may not \
 provide both the %s and the %s arguments
ERR_LDAP_CONN_CANNOT_INITIALIZE_SSL_1295=ERROR:  Unable to perform SSL \
 initialization:  %s
ERR_LDAP_CONN_CANNOT_PARSE_SASL_OPTION_1296=ERROR:  The provided SASL \
 option string "%s" could not be parsed in the form "name=value"
ERR_LDAP_CONN_NO_SASL_MECHANISM_1297=ERROR:  One or more SASL options \
 were provided, but none of them were the "mech" option to specify which SASL \
 mechanism should be used
INFO_LDAP_CONN_DESCRIPTION_SASLOPTIONS_1307=SASL bind options
ERR_TASK_CLIENT_UNEXPECTED_CONNECTION_CLOSURE_1315=NOTICE:  The \
 connection to the Directory Server was closed while waiting for a response to \
 the shutdown request.  This likely means that the server has started the \
 shutdown process
ERR_TASK_TOOL_IO_ERROR_1316=ERROR:  An I/O error occurred while \
 attempting to communicate with the Directory Server:  %s
ERR_TASK_TOOL_DECODE_ERROR_1317=ERROR:  An error occurred while \
 trying to decode the response from the server:  %s
ERR_TASK_CLIENT_INVALID_RESPONSE_TYPE_1318=ERROR:  Expected an add \
 response message but got a %s message instead
INFO_TASK_TOOL_TASK_SCHEDULED_NOW_1319=%s task %s scheduled to start \
  immediately
ERR_LDAP_CONN_INCOMPATIBLE_ARGS_1320=ERROR:  argument %s is \
 incompatible with use of this tool to interact with the directory as a client
ERR_CREATERC_ONLY_RUNS_ON_UNIX_1321=This tool may only be used on \
 UNIX-based systems
INFO_CREATERC_TOOL_DESCRIPTION_1322=Create an RC script that may be used to \
 start, stop, and restart the Directory Server on UNIX-based systems
INFO_CREATERC_OUTFILE_DESCRIPTION_1323=The path to the output file to create
ERR_CREATERC_UNABLE_TO_DETERMINE_SERVER_ROOT_1324=Unable to determine \
 the path to the server root directory.  Please ensure that the %s system \
 property or the %s environment variable is set to the path of the server \
 root directory
ERR_CREATERC_CANNOT_WRITE_1325=An error occurred while attempting to \
 generate the RC script:  %s
ERR_DSCFG_ERROR_QUIET_AND_INTERACTIVE_INCOMPATIBLE_1326=If you specify \
 the {%s} argument you must also specify {%s}
INFO_DESCRIPTION_DBTEST_TOOL_1327=This utility can be used to debug the JE \
  database
INFO_DESCRIPTION_DBTEST_SUBCMD_LIST_ROOT_CONTAINERS_1328=List the root \
  containers used by all JE backends
INFO_DESCRIPTION_DBTEST_SUBCMD_LIST_ENTRY_CONTAINERS_1329=List the entry \
  containers for a root container
INFO_DESCRIPTION_DBTEST_SUBCMD_DUMP_DATABASE_CONTAINER_1330=Dump records from \
  a database container. Depending on database size, \
  this subcommand can generate lots of output
INFO_DESCRIPTION_DBTEST_BACKEND_ID_1331=The backend ID of the JE backend to \
  debug
INFO_DESCRIPTION_DBTEST_BASE_DN_1332=The base DN of the entry container to debug
INFO_DESCRIPTION_DBTEST_DATABASE_NAME_1333=The name of the database container \
  to debug
INFO_DESCRIPTION_DBTEST_SKIP_DECODE_1334=Do not try to decode the JE data to \
  their appropriate types
ERR_DBTEST_DECODE_FAIL_1335=An error occurred while decoding data: %s
INFO_DESCRIPTION_DBTEST_SUBCMD_LIST_INDEX_STATUS_1336=List the status of \
  indexes in an entry container. \
  This subcommand can take a long time to complete, \
  as it reads all indexes for all backends
INFO_DESCRIPTION_DBTEST_MAX_KEY_VALUE_1337=Only show records with keys that \
  should be ordered before the provided value using the comparator for the \
  database container
INFO_DESCRIPTION_DBTEST_MIN_KEY_VALUE_1338=Only show records with keys that \
  should be ordered after the provided value using the comparator for the \
  database container
INFO_DESCRIPTION_DBTEST_MAX_DATA_SIZE_1339=Only show records whose data is no \
  larger than the provided value
INFO_DESCRIPTION_DBTEST_MIN_DATA_SIZE_1340=Only show records whose data is no \
  smaller than the provided value
INFO_DESCRIPTION_DBTEST_SUBCMD_LIST_DATABASE_CONTAINERS_1341=List the database \
  containers for an entry container
INFO_LABEL_DBTEST_BACKEND_ID_1342=Backend ID
INFO_LABEL_DBTEST_DB_DIRECTORY_1343=Database Directory
INFO_LABEL_DBTEST_BASE_DN_1344=Base DN
INFO_LABEL_DBTEST_JE_DATABASE_PREFIX_1345=JE Database Prefix
INFO_LABEL_DBTEST_ENTRY_COUNT_1346=Entry Count
ERR_DBTEST_NO_BACKENDS_FOR_ID_1347=None of the Directory Server \
  backends are configured with the requested backend ID %s
ERR_DBTEST_NO_ENTRY_CONTAINERS_FOR_BASE_DN_1348=None of the entry \
  containers are configured with the requested base DN %s in backend %s
ERR_DBTEST_NO_DATABASE_CONTAINERS_FOR_NAME_1349=No database container \
  exists with the requested name %s in entry container %s and backend %s
ERR_DBTEST_ERROR_INITIALIZING_BACKEND_1350=An unexpected error occurred \
  while attempting to initialize the JE backend %s: %s
ERR_DBTEST_ERROR_READING_DATABASE_1351=An unexpected error occurred \
  while attempting to read and/or decode records from the database: %s
ERR_DBTEST_DECODE_BASE_DN_1352=Unable to decode base DN string "%s" as \
  a valid distinguished name:  %s
INFO_LABEL_DBTEST_DATABASE_NAME_1353=Database Name
INFO_LABEL_DBTEST_DATABASE_TYPE_1354=Database Type
INFO_LABEL_DBTEST_JE_DATABASE_NAME_1355=JE Database Name
INFO_LABEL_DBTEST_JE_RECORD_COUNT_1356=Record Count
INFO_LABEL_DBTEST_INDEX_NAME_1357=Index Name
INFO_LABEL_DBTEST_INDEX_TYPE_1358=Index Type
INFO_LABEL_DBTEST_INDEX_STATUS_1359=Index Valid
INFO_LABEL_DBTEST_KEY_1360=Key
INFO_LABEL_DBTEST_DATA_1361=Data
WARN_DBTEST_CANNOT_UNLOCK_BACKEND_1362=An error occurred while \
 attempting to release the shared lock for backend %s:  %s.  This lock should \
 automatically be cleared when the process exits, so no further action \
 should be required
ERR_DBTEST_CANNOT_LOCK_BACKEND_1363=An error occurred while \
 attempting to acquire a shared lock for backend %s:  %s.  This generally \
 means that some other process has exclusive access to this backend (e.g., a \
 restore or an LDIF import)
ERR_DBTEST_CANNOT_DECODE_KEY_1364=An error occurred while decoding the \
  min/max key value %s: %s. Values prefixed with "0x" will be decoded as raw \
  bytes in hex. When dumping the DN2ID database, the value must be a valid \
  distinguished name. When dumping the ID2Entry database, the value will be \
  decoded as a entry ID. When dumping all other databases, the value will be \
  decoded as a string
INFO_LABEL_DBTEST_ENTRY_1365=Entry
INFO_LABEL_DBTEST_ENTRY_ID_1366=Entry ID
INFO_LABEL_DBTEST_ENTRY_DN_1367=Entry DN
INFO_LABEL_DBTEST_URI_1368=URI
INFO_LABEL_DBTEST_INDEX_VALUE_1369=Indexed Value
INFO_LABEL_DBTEST_INDEX_ENTRY_ID_LIST_1370=Entry ID List
INFO_LABEL_DBTEST_VLV_INDEX_LAST_SORT_KEYS_1371=Last Sort Keys
ERR_DBTEST_CANNOT_DECODE_SIZE_1372=An error occurred while parsing the \
  min/max data size %s as a integer: %s
ERR_DBTEST_MISSING_SUBCOMMAND_1374=A sub-command must be specified
INFO_CREATERC_USER_DESCRIPTION_1375=The name of the user account under which \
 the server should run
INFO_CREATERC_JAVA_HOME_DESCRIPTION_1376=The path to the Java installation \
 that should be used to run the server
INFO_CREATERC_JAVA_ARGS_DESCRIPTION_1377=A set of arguments that should be \
 passed to the JVM when running the server
ERR_CREATERC_JAVA_HOME_DOESNT_EXIST_1378=The directory %s specified \
 as the OPENDJ_JAVA_HOME path does not exist or is not a directory
INFO_INSTALLDS_STATUS_COMMAND_LINE_1379=To see basic server configuration \
status and configuration you can launch %s
INFO_INSTALLDS_PROMPT_ENABLE_SSL_1380=Do you want to enable SSL?
INFO_INSTALLDS_PROMPT_LDAPSPORT_1381=On which port would you like the \
 Directory Server to accept connections from LDAPS clients?
INFO_INSTALLDS_ENABLE_STARTTLS_1382=Do you want to enable Start TLS?
INFO_INSTALLDS_PROMPT_JKS_PATH_1383=Java Key Store (JKS) path:
INFO_INSTALLDS_PROMPT_PKCS12_PATH_1384=PKCS#12 key Store path:
INFO_INSTALLDS_PROMPT_KEYSTORE_PASSWORD_1385=Key store PIN:
INFO_INSTALLDS_PROMPT_CERTNICKNAME_1386=Use nickname %s?
INFO_INSTALLDS_HEADER_CERT_TYPE_1387=Certificate server options:
INFO_INSTALLDS_CERT_OPTION_SELF_SIGNED_1388=Generate self-signed certificate \
 (recommended for testing purposes only)
INFO_INSTALLDS_CERT_OPTION_JKS_1389=Use an existing certificate located on a \
 Java Key Store (JKS)
INFO_INSTALLDS_CERT_OPTION_PKCS12_1390=Use an existing certificate located on \
 a PKCS#12 key store
INFO_INSTALLDS_CERT_OPTION_PKCS11_1391=Use an existing certificate on a \
 PKCS#11 token
INFO_INSTALLDS_PROMPT_START_SERVER_1393=Do you want to start the server when \
 the configuration is completed?
ERR_INSTALLDS_CERTNICKNAME_NOT_FOUND_1394=The provided certificate \
 nickname could not be found.  The key store contains the following \
 certificate nicknames: %s
ERR_INSTALLDS_MUST_PROVIDE_CERTNICKNAME_1395=The key store contains the \
 following certificate nicknames: %s.%nYou have to provide the nickname of the \
 certificate you want to use
INFO_INSTALLDS_DESCRIPTION_DO_NOT_START_1396=Do not start the server when the \
 configuration is completed
INFO_INSTALLDS_DESCRIPTION_ENABLE_STARTTLS_1397=Enable StartTLS to allow \
 secure communication with the server using the LDAP port
INFO_INSTALLDS_DESCRIPTION_LDAPSPORT_1398=Port on which the \
 Directory Server should listen for LDAPS communication.  The LDAPS port will \
 be configured and SSL will be enabled only if this argument is explicitly \
 specified
INFO_INSTALLDS_DESCRIPTION_USE_SELF_SIGNED_1399=Generate a \
 self-signed certificate that the server should use when accepting SSL-based \
 connections or performing StartTLS negotiation
INFO_INSTALLDS_DESCRIPTION_USE_PKCS11_1400=Use a certificate in a \
 PKCS#11 token that the server should use when accepting SSL-based \
 connections or performing StartTLS negotiation
INFO_INSTALLDS_DESCRIPTION_USE_JAVAKEYSTORE_1401=Path of a Java \
 Key Store (JKS) containing a certificate to be used as the server certificate
INFO_INSTALLDS_DESCRIPTION_USE_PKCS12_1402=Path of a PKCS#12 key \
 store containing the certificate that the server should use when accepting \
 SSL-based connections or performing StartTLS negotiation
INFO_INSTALLDS_DESCRIPTION_KEYSTOREPASSWORD_1403=Certificate key store PIN.  \
 A PIN is required when you specify to use an existing certificate (JKS, \
 JCEKS, PKCS#12 or PKCS#11) as server certificate
INFO_INSTALLDS_DESCRIPTION_KEYSTOREPASSWORD_FILE_1404=Certificate key store \
 PIN file.  A PIN is required when you specify to use an existing certificate \
 (JKS, JCEKS, PKCS#12 or PKCS#11) as server certificate
INFO_INSTALLDS_DESCRIPTION_CERT_NICKNAME_1405=Nickname of the \
 certificate that the server should use when accepting SSL-based \
 connections or performing StartTLS negotiation
ERR_INSTALLDS_SEVERAL_CERTIFICATE_TYPE_SPECIFIED_1406=You have \
 specified several certificate types to be used.  Only one certificate type \
 (self-signed, JKS, JCEKS, PKCS#12 or PCKS#11) is allowed
ERR_INSTALLDS_CERTIFICATE_REQUIRED_FOR_SSL_OR_STARTTLS_1407=You have \
 chosen to enable SSL or StartTLS.  You must specify which type of certificate \
 you want the server to use
ERR_INSTALLDS_NO_KEYSTORE_PASSWORD_1408=You must provide the PIN of the \
 keystore to retrieve the certificate to be used by the server.  You can use \
 {%s} or {%s}
INFO_INSTALLDS_DESCRIPTION_NO_PROMPT_1409=Perform an installation in \
 non-interactive mode.  If some data in the command is missing the user will \
 not be prompted and the tool will fail
ERR_INSTALLDS_SSL_OR_STARTTLS_REQUIRED_1410=You have specified to use a \
 certificate as server certificate.  You must enable SSL (using option {%s}) \
 or Start TLS (using option %s)
ERR_UPGRADE_INCOMPATIBLE_ARGS_1411=The argument '%s' is incompatible \
 with '%s'
INFO_TASKINFO_TOOL_DESCRIPTION_1412=This utility can be used to obtain a list \
 of tasks scheduled to run within the Directory Server as well as information \
 about individual tasks
INFO_TASKINFO_SUMMARY_ARG_DESCRIPTION_1413=Print a summary of tasks
INFO_TASKINFO_TASK_ARG_DESCRIPTION_1414=ID of a particular task \
 about which this tool will display information
INFO_TASKINFO_CMD_REFRESH_1415=refresh
INFO_TASKINFO_CMD_CANCEL_1416=cancel task
INFO_TASKINFO_CMD_VIEW_LOGS_1417=view logs
INFO_TASKINFO_CMD_CANCEL_NUMBER_PROMPT_1419=Enter the number of a task to \
  cancel [%d]
ERR_TASKINFO_INVALID_MENU_KEY_1422=Invalid menu item or task number '%s'
INFO_TASKINFO_FIELD_ID_1423=ID
INFO_TASKINFO_FIELD_TYPE_1424=Type
INFO_TASKINFO_FIELD_STATUS_1425=Status
INFO_TASKINFO_FIELD_SCHEDULED_START_1426=Scheduled Start Time
INFO_TASKINFO_FIELD_ACTUAL_START_1427=Actual Start Time
INFO_TASKINFO_FIELD_COMPLETION_TIME_1428=Completion Time
INFO_TASKINFO_FIELD_DEPENDENCY_1429=Dependencies
INFO_TASKINFO_FIELD_FAILED_DEPENDENCY_ACTION_1430=Failed Dependency Action
INFO_TASKINFO_FIELD_LOG_1431=Log Message(s)
INFO_TASKINFO_FIELD_LAST_LOG_1432=Last Log Message
INFO_TASKINFO_FIELD_NOTIFY_ON_COMPLETION_1433=Email Upon Completion
INFO_TASKINFO_FIELD_NOTIFY_ON_ERROR_1434=Email Upon Error
INFO_TASKINFO_CMD_CANCEL_SUCCESS_1435=Task %s canceled
ERR_TASKINFO_RETRIEVING_TASK_ENTRY_1437=Error retrieving task entry \
  %s:  %s
ERR_TASKINFO_UNKNOWN_TASK_ENTRY_1438=There are no tasks with ID %s
INFO_TASKINFO_DETAILS_1439=Task Details
INFO_TASKINFO_OPTIONS_1440=%s Options
INFO_TASKINFO_NO_TASKS_1441=No tasks exist
INFO_TASKINFO_NONE_1442=None
INFO_TASKINFO_NONE_SPECIFIED_1443=None Specified
INFO_TASKINFO_IMMEDIATE_EXECUTION_1444=Immediate execution
INFO_TASKINFO_LDAP_EXCEPTION_1445=Error connecting to the directory server: \
  '%s'. Verify that the connection options are correct and that the server is \
  running
ERR_INCOMPATIBLE_ARGUMENTS_1446=Options '%s' and '%s' are incompatible \
  with each other and cannot be used together
INFO_TASKINFO_TASK_ARG_CANCEL_1447=ID of a particular task to cancel
ERR_TASKINFO_CANCELING_TASK_1448=Error canceling task '%s': %s
ERR_TASKINFO_ACCESSING_LOGS_1449=Error accessing logs for task '%s': %s
ERR_TASKINFO_NOT_CANCELABLE_TASK_INDEX_1450=Task at index %d is not \
  cancelable
ERR_TASKINFO_NOT_CANCELABLE_TASK_1451=Task %s has finished and cannot \
  be canceled
INFO_TASKINFO_NO_CANCELABLE_TASKS_1452=There are currently no cancelable tasks
ERR_TASK_CLIENT_UNKNOWN_TASK_1453=There are no tasks defined with ID '%s'
ERR_TASK_CLIENT_UNCANCELABLE_TASK_1454=Task '%s' has finished and \
  cannot be canceled
ERR_TASK_CLIENT_TASK_STATE_UNKNOWN_1455=State for task '%s' cannot be \
  determined
INFO_DESCRIPTION_START_DATETIME_1456=Indicates the date/time at which this \
  operation will start when scheduled as a server task expressed in \
  YYYYMMDDhhmmssZ format for UTC time or YYYYMMDDhhmmss for local time.  A \
  value of '0' will cause the task to be scheduled for \
  immediate execution.  When this option is specified the operation will be \
  scheduled to start at the specified time after which this utility will exit \
  immediately
ERR_START_DATETIME_FORMAT_1457=The start date/time must in \
  YYYYMMDDhhmmssZ format for UTC time or YYYYMMDDhhmmss for local time
INFO_TASK_TOOL_TASK_SCHEDULED_FUTURE_1458=%s task %s scheduled to start %s
ERR_TASK_TOOL_START_TIME_NO_LDAP_1459=You have provided options for \
  scheduling this operation as a task but options provided for connecting to \
  the server's tasks backend resulted in the following error: '%s'
INFO_DESCRIPTION_PROP_FILE_PATH_1461=Path to the file containing default \
  property values used for command line arguments
INFO_DESCRIPTION_NO_PROP_FILE_1462=No properties file will be \
  used to get default command line argument values
INFO_DESCRIPTION_TASK_TASK_ARGS_1463=Task Scheduling Options
INFO_DESCRIPTION_TASK_LDAP_ARGS_1464=Task Backend Connection Options
INFO_DESCRIPTION_GENERAL_ARGS_1465=General Options
INFO_DESCRIPTION_IO_ARGS_1466=Utility Input/Output Options
INFO_DESCRIPTION_LDAP_CONNECTION_ARGS_1467=LDAP Connection Options
INFO_DESCRIPTION_CONFIG_OPTIONS_ARGS_1468=Configuration Options
INFO_DESCRIPTION_TASK_COMPLETION_NOTIFICATION_1469=Email address \
  of a recipient to be notified when the task completes.  This option may be \
  specified more than once
INFO_DESCRIPTION_TASK_ERROR_NOTIFICATION_1470=Email address \
  of a recipient to be notified if an error occurs when this task executes.  \
  This option may be specified more than once
INFO_DESCRIPTION_TASK_DEPENDENCY_ID_1471=ID of a task upon which \
  this task depends.  A task will not start execution until all its \
  dependencies have completed execution
INFO_DESCRIPTION_TASK_FAILED_DEPENDENCY_ACTION_1472=Action this task will \
  take should one if its dependent tasks fail.  The value must be one of %s.  \
  If not specified defaults to %s
ERR_TASKTOOL_OPTIONS_FOR_TASK_ONLY_1473=The option %s is only \
  applicable when scheduling this operation as a task
ERR_TASKTOOL_INVALID_EMAIL_ADDRESS_1474=The value %s for option %s is \
  not a valid email address
ERR_TASKTOOL_INVALID_FDA_1475=The failed dependency action value %s is \
  invalid.  The value must be one of %s
ERR_TASKTOOL_FDA_WITH_NO_DEPENDENCY_1476=The failed dependency action \
  option is to be used in conjunction with one or more dependencies
ERR_TASKINFO_TASK_NOT_CANCELABLE_TASK_1477=Error:  task %s is not in a \
  cancelable state
NOTE_BACKUPDB_CANCELLED_1478=The backup process was cancelled
INFO_INSTALLDS_DESCRIPTION_REJECTED_FILE_1479=Write rejected entries to the \
 specified file
ERR_INSTALLDS_CANNOT_WRITE_REJECTED_1480=Cannot write to rejected entries \
 file %s.  Verify that you have enough write rights on the file
INFO_INSTALLDS_PROMPT_REJECTED_FILE_1481=Write rejected entries to file:
INFO_INSTALLDS_DESCRIPTION_SKIPPED_FILE_1482=Write skipped entries to the \
 specified file
ERR_INSTALLDS_CANNOT_WRITE_SKIPPED_1483=Cannot write to skipped entries \
 file %s.  Verify that you have enough write rights on the file
INFO_INSTALLDS_PROMPT_SKIPPED_FILE_1484=Write skipped entries to file:
ERR_INSTALLDS_TOO_MANY_KEYSTORE_PASSWORD_TRIES_1485=The maximum number \
 of tries to provide the certificate key store PIN is %s.  Install canceled
INFO_JAVAPROPERTIES_TOOL_DESCRIPTION_1486=This utility can be used to change \
 the java arguments and java home that are used by the different server \
 commands.%n%nBefore launching the command, edit the properties file located \
 in %s to specify the java arguments and java home. When you have edited the \
 properties file, run this command for the changes to be taken into account.\
 %n%nNote that the changes will only apply to this server installation. No \
 modifications will be made to your environment variables
INFO_JAVAPROPERTIES_DESCRIPTION_SILENT_1487=Run the tool in quiet mode.  Quiet \
 mode will not output progress information to standard output
INFO_JAVAPROPERTIES_DESCRIPTION_PROPERTIES_FILE_1488=The properties file to \
 be used to generate the scripts.  If this attribute is not specified %s will \
 be used
INFO_JAVAPROPERTIES_DESCRIPTION_DESTINATION_FILE_1489=The script file that \
 will be written.  If not specified %s will be written
INFO_JAVAPROPERTIES_DESCRIPTION_HELP_1490=Display this usage information
ERR_JAVAPROPERTIES_WITH_PROPERTIES_FILE_1491=The file properties "%s" \
 cannot be read.  Check that it exists and that you have read rights to it
ERR_JAVAPROPERTIES_WITH_DESTINATION_FILE_1492=The destination file "%s" \
 cannot be written.  Check that you have write rights to it
ERR_JAVAPROPERTIES_WRITING_DESTINATION_FILE_1493=The destination file \
 "%s" cannot be written.  Check that you have right reads to it
INFO_JAVAPROPERTIES_SUCCESSFUL_NON_DEFAULT_1494=The script file %s was \
 successfully created.  For the command-lines to use the java properties \
 specified on %s you must copy the created script file to %s
INFO_JAVAPROPERTIES_SUCCESSFUL_1495=The operation was successful.  The server \
 commands will use the java arguments and java home specified in the \
 properties file located in %s
INFO_DESCRIPTION_TEST_IF_OFFLINE_1496=When this is set test if the command \
 must be run in offline or online mode, returning the appropriate error code
ERR_BACKUPDB_REPEATED_BACKEND_ID_1497=The backend ID '%s' has been \
 specified several times
ERR_INSTALLDS_EMPTY_DN_RESPONSE_1498=ERROR:  The empty LDAP DN is not \
 a valid value

# Placeholders for values as they will be displayed in the usage
INFO_FILE_PLACEHOLDER_1499={file}
INFO_CONFIGFILE_PLACEHOLDER_1501={configFile}
INFO_LDIFFILE_PLACEHOLDER_1502={ldifFile}
INFO_SEED_PLACEHOLDER_1503={seed}
INFO_KEYSTOREPATH_PLACEHOLDER_1504={keyStorePath}
INFO_TRUSTSTOREPATH_PLACEHOLDER_1505={trustStorePath}
INFO_BINDPWD_FILE_PLACEHOLDER_1506={bindPasswordFile}
INFO_CONFIGCLASS_PLACEHOLDER_1507={configClass}
INFO_HOST_PLACEHOLDER_1508={host}
INFO_PORT_PLACEHOLDER_1509={port}
INFO_BASEDN_PLACEHOLDER_1510={baseDN}
INFO_ROOT_USER_DN_PLACEHOLDER_1511={rootUserDN}
INFO_BINDDN_PLACEHOLDER_1512={bindDN}
INFO_BINDPWD_PLACEHOLDER_1513={bindPassword}
INFO_KEYSTORE_PWD_PLACEHOLDER_1514={keyStorePassword}
INFO_PATH_PLACEHOLDER_1515={path}
INFO_TRUSTSTORE_PWD_FILE_PLACEHOLDER_1516={path}
INFO_TRUSTSTORE_PWD_PLACEHOLDER_1517={trustStorePassword}
INFO_NICKNAME_PLACEHOLDER_1518={nickname}
INFO_ASSERTION_FILTER_PLACEHOLDER_1519={filter}
INFO_FILTER_PLACEHOLDER_1520={filter}
INFO_PROXYAUTHID_PLACEHOLDER_1521={authzID}
INFO_SASL_OPTION_PLACEHOLDER_1522={name=value}
INFO_PROTOCOL_VERSION_PLACEHOLDER_1523={version}
INFO_DESCRIPTION_PLACEHOLDER_1524={description}
INFO_GROUPNAME_PLACEHOLDER_1525={groupName}
INFO_MEMBERNAME_PLACEHOLDER_1526={memberName}
INFO_BACKENDNAME_PLACEHOLDER_1527={backendName}
INFO_SERVERID_PLACEHOLDER_1528={serverID}
INFO_USERID_PLACEHOLDER_1529={userID}
INFO_VALUE_SET_PLACEHOLDER_1530={PROP:VALUE}
INFO_START_DATETIME_PLACEHOLDER_1531={startTime}
INFO_PROP_FILE_PATH_PLACEHOLDER_1532={propertiesFilePath}
INFO_EMAIL_ADDRESS_PLACEHOLDER_1533={emailAddress}
INFO_TASK_ID_PLACEHOLDER_1534={taskID}
INFO_ACTION_PLACEHOLDER_1535={action}
INFO_TYPE_PLACEHOLDER_1536={type}
INFO_CATEGORY_PLACEHOLDER_1537={category}
INFO_PROPERTY_PLACEHOLDER_1538={property}
INFO_NAME_PLACEHOLDER_1539={name}
INFO_UNIT_PLACEHOLDER_1540={unit}
INFO_BACKUPID_PLACEHOLDER_1541={backupID}
INFO_BACKUPDIR_PLACEHOLDER_1542={backupDir}
INFO_LDAPPORT_PLACEHOLDER_1543={ldapPort}
INFO_JMXPORT_PLACEHOLDER_1544={jmxPort}
INFO_KEY_MANAGER_PROVIDER_DN_PLACEHOLDER_1545={keyManagerProviderDN}
INFO_TRUST_MANAGER_PROVIDER_DN_PLACEHOLDER_1546={trustManagerProviderDN}
INFO_KEY_MANAGER_PATH_PLACEHOLDER_1547={keyManagerPath}
INFO_ROOT_USER_PWD_PLACEHOLDER_1548={rootUserPassword}
INFO_SERVER_ROOT_DIR_PLACEHOLDER_1549={serverRootDir}
INFO_SERVICE_NAME_PLACEHOLDER_1550={serviceName}
INFO_USER_NAME_PLACEHOLDER_1551={userName}
INFO_ARGS_PLACEHOLDER_1552={args}
INFO_DATABASE_NAME_PLACEHOLDER_1553={databaseName}
INFO_MAX_KEY_VALUE_PLACEHOLDER_1554={maxKeyValue}
INFO_MIN_KEY_VALUE_PLACEHOLDER_1555={minKeyValue}
INFO_MAX_DATA_SIZE_PLACEHOLDER_1556={maxDataSize}
INFO_MIN_DATA_SIZE_PLACEHOLDER_1557={minDataSize}
INFO_CLEAR_PWD_1558={clearPW}
INFO_ENCODED_PWD_PLACEHOLDER_1559={encodedPW}
INFO_STORAGE_SCHEME_PLACEHOLDER_1560={scheme}
INFO_BRANCH_DN_PLACEHOLDER_1561={branchDN}
INFO_ATTRIBUTE_PLACEHOLDER_1562={attribute}
INFO_WRAP_COLUMN_PLACEHOLDER_1563={wrapColumn}
INFO_TEMPLATE_FILE_PLACEHOLDER_1564={templateFile}
INFO_REJECT_FILE_PLACEHOLDER_1565={rejectFile}
INFO_SKIP_FILE_PLACEHOLDER_1566={skipFile}
INFO_PROGRAM_NAME_PLACEHOLDER_1567={programName}
INFO_NUM_ENTRIES_PLACEHOLDER_1568={numEntries}
INFO_ROOT_USER_PWD_FILE_PLACEHOLDER_1569={rootUserPasswordFile}
INFO_LDAP_CONTROL_PLACEHOLDER_1570={controloid[:criticality[:value|::b64value|:<filePath]]}
INFO_ENCODING_PLACEHOLDER_1571={encoding}
INFO_ATTRIBUTE_LIST_PLACEHOLDER_1572={attrList}
INFO_NEW_PASSWORD_PLACEHOLDER_1573={newPassword}
INFO_CURRENT_PASSWORD_PLACEHOLDER_1574={currentPassword}
INFO_SEARCH_SCOPE_PLACEHOLDER_1575={searchScope}
INFO_SORT_ORDER_PLACEHOLDER_1576={sortOrder}
INFO_VLV_PLACEHOLDER_1577={before:after:index:count | before:after:value}
INFO_DEREFERENCE_POLICE_PLACEHOLDER_1578={dereferencePolicy}
INFO_SIZE_LIMIT_PLACEHOLDER_1579={sizeLimit}
INFO_TIME_LIMIT_PLACEHOLDER_1580={timeLimit}
INFO_SCOPE_PLACEHOLDER_1581={scope}
INFO_FILTER_FILE_PLACEHOLDER_1582={filterFile}
INFO_OUTPUT_FILE_PLACEHOLDER_1583={outputFile}
INFO_TARGETDN_PLACEHOLDER_1584={targetDN}
INFO_TIME_PLACEHOLDER_1585={time}
INFO_TRUE_FALSE_PLACEHOLDER_1586={true|false}
INFO_INDEX_PLACEHOLDER_1587={index}
INFO_STOP_REASON_PLACEHOLDER_1588={stopReason}
INFO_STOP_TIME_PLACEHOLDER_1589={stopTime}
INFO_SECONDS_PLACEHOLDER_1590={seconds}
INFO_DATA_PLACEHOLDER_1591={data}
INFO_ADDRESS_PLACEHOLDER_1592={address}
INFO_SUBJECT_PLACEHOLDER_1593={subject}
INFO_ADMINUID_PLACEHOLDER_1594={adminUID}
INFO_KEYSTORE_PWD_FILE_PLACEHOLDER_1595={keyStorePasswordFile}
INFO_PSEARCH_PLACEHOLDER_1596=ps[:changetype[:changesonly[:entrychgcontrols]]]

INFO_MULTICHOICE_TRUE_VALUE_1597=true
INFO_MULTICHOICE_FALSE_VALUE_1598=false

INFO_INSTALLDS_SERVER_JMXPORT_LABEL_1599=JMX Listener Port:
INFO_INSTALLDS_START_SERVER_1600=Start Server when the configuration is completed
INFO_INSTALLDS_DO_NOT_START_SERVER_1601=Do not start Server when the configuration \
 is completed
INFO_INSTALLDS_SUMMARY_1602=Setup Summary%n=============
INFO_INSTALLDS_CONFIRM_INSTALL_PROMPT_1603=What would you like to do?
INFO_INSTALLDS_CONFIRM_INSTALL_1604=Set up the server with the parameters above
INFO_INSTALLDS_PROVIDE_DATA_AGAIN_1605=Provide the setup parameters again
INFO_INSTALLDS_CANCEL_1606=Cancel and exit
ERR_CONFIGDS_CANNOT_UPDATE_CRYPTO_MANAGER_1607=An error occurred while \
 attempting to update the crypto manager in the Directory Server: %s
INFO_TASK_TOOL_TASK_SUCESSFULL_1608=%s task %s has been successfully completed
INFO_TASK_TOOL_TASK_NOT_SUCESSFULL_1609=%s task %s did not complete \
 successfully
ERR_CANNOT_READ_TRUSTSTORE_1610=Cannot access trust store '%s'.  Verify \
 that the provided trust store exists and that you have read access rights to it
ERR_CANNOT_READ_KEYSTORE_1611=Cannot access key store '%s'.  Verify \
 that the provided key store exists and that you have read access rights to it
INFO_LDIFDIFF_DESCRIPTION_IGNORE_ATTRS_1612=File containing a list of attributes \
 to ignore when computing the difference
INFO_LDIFDIFF_DESCRIPTION_IGNORE_ENTRIES_1613=File containing a list of entries (DN) \
 to ignore when computing the difference
ERR_LDIFDIFF_CANNOT_READ_FILE_IGNORE_ENTRIES_1614=An error occurred while attempting \
 to read the file '%s' containing the list of ignored entries: %s
ERR_LDIFDIFF_CANNOT_READ_FILE_IGNORE_ATTRIBS_1615=An error occurred while attempting \
 to read the file '%s' containing the list of ignored attributes: %s
INFO_LDIFDIFF_CANNOT_PARSE_STRING_AS_DN_1616=The string '%s' from file '%s' could \
 not be parsed as a dn
INFO_CHANGE_NUMBER_CONTROL_RESULT_1617=The %s operation change number is %s
INFO_INSTALLDS_PROMPT_ADMINCONNECTORPORT_1618=On which port would you like the \
 Administration Connector to accept connections?
INFO_INSTALLDS_DESCRIPTION_ADMINCONNECTORPORT_1619=Port on which the \
 Administration Connector should listen for communication
ERR_CONFIGDS_CANNOT_UPDATE_ADMIN_CONNECTOR_PORT_1620=An error occurred \
 while attempting to update the administration connector port:  %s
ERR_TASKINFO_LDAP_EXCEPTION_SSL_1621=Error connecting to the directory server at %s on %s. \
Check this port is an administration port
INFO_DESCRIPTION_ADMIN_PORT_1622=Directory server administration port number
INFO_INSTALLDS_DESCRIPTION_USE_JCEKS_1623=Path of a JCEKS containing a \
 certificate to be used as the server certificate
INFO_INSTALLDS_CERT_OPTION_JCEKS_1624=Use an existing certificate located on a \
 JCEKS key store
INFO_INSTALLDS_PROMPT_JCEKS_PATH_1625=JCEKS Key Store path:
ERR_CONFIG_KEYMANAGER_CANNOT_CREATE_JCEKS_PROVIDER_1626=Error creating \
 JCEKS Key Provider configuration:  %s
ERR_STOPDS_CANNOT_CONNECT_SSL_1628=ERROR:  Cannot establish a connection to \
 the Directory Server at %s on port %s. Check this port is an administration port
ERR_PWPSTATE_CANNOT_CONNECT_SSL_1629=ERROR:  Cannot establish a connection to \
 the Directory Server at %s on port %s. Check this port is an administration port






ERR_BACKUPDB_CANNOT_BACKUP_IN_DIRECTORY_1650=The target backend %s \
 cannot be backed up to the backup directory %s: this directory is \
 already a backup location for backend %s

INFO_RECURRING_TASK_PLACEHOLDER_1651={schedulePattern}
ERR_ENCPW_CANNOT_INITIALIZE_SERVER_COMPONENTS_1652=An error occurred \
 while attempting to initialize server components to run the encode \
 password tool:  %s
ERR_LDIFIMPORT_COUNT_REJECTS_REQUIRES_OFFLINE_1653=The %s \
 argument is not supported for online imports
INFO_DESCRIPTION_RECURRING_TASK_1654=Indicates the task is recurring and will \
 be scheduled according to the value argument expressed in crontab(5) \
 compatible time/date pattern
INFO_TASK_TOOL_RECURRING_TASK_SCHEDULED_1655=Recurring %s task %s scheduled \
 successfully

ERR_INTERNAL_1658=Internal Error: %s
INFO_LDIFEXPORT_PATH_TO_LDIF_FILE_1662=Exporting to %s

#
# These are the localized version of the answers that the user can provide in
# interactive tools.
#
INFO_PROMPT_YES_COMPLETE_ANSWER_1663=yes
INFO_PROMPT_YES_FIRST_LETTER_ANSWER_1664=y
INFO_PROMPT_NO_COMPLETE_ANSWER_1665=no
INFO_PROMPT_NO_FIRST_LETTER_ANSWER_1666=n

ERR_START_DATETIME_ALREADY_PASSED_1667=The specified start time '%s' \
 has already passed

ERR_LDAPCOMPARE_ERROR_READING_FILE_1668=An error occurred reading file \
 '%s'.  Check that the file exists and that you have read access rights to \
 it.  Details: %s

ERR_STOPDS_DATETIME_ALREADY_PASSED_1669=The specified stop time '%s' \
 has already passed

ERR_LDAPCOMPARE_FILENAME_AND_DNS_1670=Both entry DNs and a file name \
 were provided for the compare operation.  These arguments are not compatible

# The following chars correspond to the following properties:
# INFO_TASKINFO_CMD_REFRESH_1415=refresh
# INFO_TASKINFO_CMD_CANCEL_1416=cancel task
# INFO_TASKINFO_CMD_VIEW_LOGS_1417=view logs
INFO_TASKINFO_CMD_REFRESH_CHAR_1671=r
INFO_TASKINFO_CMD_CANCEL_CHAR_1672=c
INFO_TASKINFO_CMD_VIEW_LOGS_CHAR_1673=l

INFO_LDIFDIFF_DESCRIPTION_CHECK_SCHEMA_1674=Takes into account the syntax of \
 the attributes as defined in the schema to make the value comparison.  The \
 provided LDIF files must be conform to the server schema
WARN_LDIFDIFF_NO_CONFIG_FILE_1675=WARNING:  no configuration file was \
 provided as argument.  No schema check will be performed.  If this is being \
 called through the '%s' command-line, verify that the script has not been \
 modified
INFO_LDAPAUTH_NON_EMPTY_PASSWORD_1676=You must provide a non-empty password \
to continue

INFO_BATCH_FILE_PATH_PLACEHOLDER_1677={batchFilePath}
INFO_DESCRIPTION_BATCH_FILE_PATH_1678=Path to a batch file containing \
a set of dsconfig commands to be executed
ERR_DSCFG_ERROR_BATCH_FILE_AND_INTERACTIVE_INCOMPATIBLE_1679=If you specify \
 the {%s} argument you must also specify {%s}

ERR_TIMEOUT_DURING_STARTUP_1680=The timeout of '%d' seconds to start \
 the server has been reached.  You can use the argument '--%s' to increase \
 this timeout
INFO_INSTALLDS_ENABLE_WINDOWS_SERVICE_1681=Enable the server to run as a \
 Windows Service
INFO_INSTALLDS_DO_NOT_ENABLE_WINDOWS_SERVICE_1682=Do not enable the server to \
 run as a Windows Service
INFO_LDIFIMPORT_DESCRIPTION_TEMP_DIRECTORY_1683=Path to temporary directory \
for index scratch files during LDIF import
INFO_LDIFIMPORT_TEMP_DIR_PLACEHOLDER_1684={directory}
INFO_LDIFIMPORT_DESCRIPTION_DN_VALIDATION_1685=Perform DN validation \
 during later part of LDIF import
INFO_LDIFIMPORT_DESCRIPTION_THREAD_COUNT_1686=Number of threads used to \
 read LDIF file during import. Default value (0) equals: 2 x (number of CPUs)
INFO_LDIFIMPORT_THREAD_COUNT_PLACEHOLDER_1687={count}
ERR_LDIFIMPORT_CANNOT_PARSE_THREAD_COUNT_1688=The value %s for \
threadCount cannot be parsed: %s
INFO_LDAPSEARCH_PUBLIC_CHANGELOG_COOKIE_EXC_1689=# Public \
 changelog exchange control(%s): %s
INFO_ENCPW_DESCRIPTION_INPUT_PW_1690=The password to encode or to compare \
 against an encoded password is interactively asked to the user
INFO_ENCPW_INPUT_PWD_1_1691=Please enter the password :
INFO_ENCPW_INPUT_PWD_2_1692=Please renter the password:
ERR_ENCPW_NOT_SAME_PW_1693=Provided passwords don't matched
ERR_ENCPW_CANNOT_READ_PW_1694=Cannot read password from the input: %s
INFO_REBUILDINDEX_DESCRIPTION_REBUILD_ALL_1695=Rebuild all indexes, including \
any DN2ID, DN2URI, VLV and extensible indexes. Cannot be used \
with the "-i" option or the "--rebuildDegraded" option
INFO_REBUILDINDEX_TEMP_DIR_PLACEHOLDER_1697={directory}
INFO_REBUILDINDEX_DESCRIPTION_TEMP_DIRECTORY_1698=Path to temporary directory \
for index scratch files during index rebuilding
ERR_REBUILDINDEX_REBUILD_ALL_ERROR_1699=Index "-i" option cannot be \
specified with the "--rebuildAll" option
INFO_INSTALLDS_PROVIDE_BASE_DN_PROMPT_1700=Do you want to create base DNs in \
 the server?
ERR_INSTALLDS_NO_BASE_DN_AND_CONFLICTING_ARG_1701=You have specified \
 not to create a base DN.  If no base DN is to be created you cannot specify \
 argument '%s'
INFO_DESCRIPTION_SUBENTRIES_1702=Use subentries control to specify that \
 subentries are visible and normal entries are not
INFO_INSTALLDS_DESCRIPTION_HOST_NAME_1703=The fully-qualified directory server \
 host name that will be used when generating self-signed \
 certificates for LDAP SSL/StartTLS, the administration connector, and \
 replication
INFO_INSTALLDS_PROMPT_HOST_NAME_1704=Provide the fully-qualified directory server \
 host name that will be used when generating self-signed \
 certificates for LDAP SSL/StartTLS, the administration connector, and \
 replication
INFO_PERIOD_PLACEHOLDER_1705={period}
INFO_DESCRIPTION_REFRESH_PERIOD_1706=When this argument is specified, the \
 status command will display its contents periodically.  Used to specify \
 the period (in seconds) between two displays of the status
INFO_INSTALLDS_PRINT_EQUIVALENT_COMMAND_LINE_1708=Print equivalent \
 non-interactive command-line
ERR_WINDOWS_SERVICE_ENABLING_ERROR_STARTING_SERVER_1709=The Windows \
 Service was successfully configured but there was an error starting it.  \
 Error code starting Windows Service: %d
INFO_DESCRIPTION_DBTEST_STATS_ONLY_1710=Do not display the JE data, \
just statistics
INFO_TIMEOUT_PLACEHOLDER_1711={timeout}
INFO_DESCRIPTION_CONNECTION_TIMEOUT_1712=Maximum length of time (in \
 milliseconds) that can be taken to establish a connection.  Use '0' to \
 specify no time out
ERR_MAKELDIF_CANNOT_WRITE_ENTRY_WITHOUT_DN_1713=An error occurred while \
attempting to write entry to LDIF:  Could not calculate the DN for the \
entry (no value found for the RDN attribute %s)
ERR_CLIENT_SIDE_TIMEOUT_1714=A client side timeout occurred.\
 %nAdditional Information:  %s
INFO_LABEL_DBTEST_INDEX_UNDEFINED_RECORD_COUNT_1715=Undefined
INFO_MAXIMUM_DURATION_PLACEHOLDER_1716={maximum duration}
INFO_DESCRIPTION_PURGE_HISTORICAL_MAXIMUM_DURATION_1717=This argument specifies \
the maximum duration the purge processing must last expressed in seconds
ERR_RECURRING_SCHEDULE_FORMAT_ERROR_1718=The provided schedule value \
 has an invalid format.  The schedule must be expressed using a crontab(5) \
 format.  Error details: %s
INFO_DESCRIPTION_REMOTE_1719=Connect to a remote server
INFO_REBUILDINDEX_DESCRIPTION_REBUILD_DEGRADED_1720=Rebuild all degraded \
 indexes, including any DN2ID, DN2URI, VLV and extensible indexes. Cannot be used \
 with the "-i" option or the "--rebuildAll" option
ERR_REBUILDINDEX_REBUILD_DEGRADED_ERROR_1721=Option "--rebuildDegraded" cannot be \
 specified with the "--%s" option
ERR_REBUILDINDEX_REBUILD_ALL_DEGRADED_ERROR_1722=Option "--rebuildAll" \
 cannot be specified with the "--%s" option
ERR_CONFIGDS_CANNOT_UPDATE_DIGEST_MD5_FQDN_1733=An error occurred while \
 attempting to update the FQDN for the DIGEST-MD5 SASL mechanism:  %s
INFO_REBUILDINDEX_DESCRIPTION_CLEAR_DEGRADED_STATE_1734=Indicates that indexes do not need \
rebuilding because they are known to be empty and forcefully marks them as valid. \
This is an advanced option which must only be used in cases where a degraded index \
is known to be empty and does not therefore need rebuilding. \
This situation typically arises when an index is created for an attribute \
which has just been added to the schema
INFO_LDIFDIFF_DESCRIPTION_USE_COMPARE_RESULT_1735=Use the LDAP compare result \
as an exit code for reporting differences between the two LDIF files
INFO_LDAPCOMPARE_DESCRIPTION_USE_COMPARE_RESULT_1736=Use the LDAP compare result \
as an exit code for the LDAP compare operations
ERR_BUILDVERSION_NOT_FOUND_1737=The version of the installed OpenDJ could not be determined \
because the version file '%s' could not be found. Restore it from backup before continuing
ERR_BUILDVERSION_MALFORMED_1738=The version of the installed OpenDJ could not be determined \
because the version file '%s' exists but contains invalid data. \
Restore it from backup before continuing
ERR_BUILDVERSION_MISMATCH_1739=The OpenDJ binary version '%s' does not match the installed \
version '%s'. Please run upgrade before continuing
INFO_UPGRADE_OPTION_IGNORE_ERRORS_1740=Ignores any errors which occur during the upgrade. This option \
should be used with caution and may be useful in automated deployments where potential errors are \
known in advance and resolved after the upgrade has completed
INFO_UPGRADE_OPTION_FORCE_1741=Forces a non-interactive upgrade to continue even if it requires user \
interaction. In particular, long running or critical upgrade tasks, such as re-indexing, which \
require user confirmation will be skipped. This option may only be used with the '%s' option
ERR_UPGRADE_USER_INTERACTION_REQUIRED_1742=The upgrade cannot be performed non-interactively \
because one or more upgrade tasks are critical and require user interaction in order to complete. \
Please re-run upgrade interactively by removing the '%s' option, or force the upgrade to complete \
by specifying the '%s' option
INFO_UPGRADE_DESCRIPTION_CLI_1743=Upgrades OpenDJ configuration and application data so that it is \
compatible with the installed binaries.%n%nThis tool should be run immediately after upgrading \
the OpenDJ binaries and before restarting the server.%n%nNOTE: this tool does not provide backup \
or restore capabilities. Therefore, it is the responsibility of the OpenDJ administrator to take \
necessary precautions before performing the upgrade
ERR_UPGRADE_MAIN_UPGRADE_PROCESS_1800=The upgrade failed to complete for the following reason: %s
INFO_UPGRADE_SUCCESSFUL_1801=OpenDJ was successfully upgraded from version %s to %s
INFO_UPGRADE_PERFORMING_TASKS_1802=Performing upgrade
INFO_UPGRADE_TITLE_1803=OpenDJ Upgrade Utility
INFO_UPGRADE_SUMMARY_1804=OpenDJ will be upgraded from version %s to %s
ERR_UPGRADE_REQUIRES_SERVER_OFFLINE_1805=OpenDJ cannot be upgraded because the server is currently \
running. Please stop the server and try again
ERR_UPGRADE_VERSION_UP_TO_DATE_1806=OpenDJ has already been upgraded to version %s
ERR_UPGRADE_DISPLAY_NOTIFICATION_ERROR_1807=An unexpected error occurred \
while attempting to display a notification: %s
ERR_UPGRADE_DISPLAY_CONFIRM_ERROR_1808=An unexpected error occurred \
while attempting to display a confirmation : %s
ERR_UPGRADE_INVALID_USER_OPTIONS_SELECTED_1809=Invalid user's \
options selected
INFO_UPGRADE_CHANGE_DONE_IN_SPECIFIC_FILE_1810=...Change(s) done in %s (x%s)
INFO_UPGRADE_NO_CHANGE_DONE_IN_SPECIFIC_FILE_1811=...No change applied in %s
ERR_UPGRADE_TASKS_FAIL_1812=\nAn error occurred while performing an upgrade task: %s
INFO_UPGRADE_TASK_NEEDS_USER_CONFIRM_1813=%s.%nDo you want to make this configuration change?
INFO_UPGRADE_DISPLAY_CONFIRM_START_1814=The upgrade is ready to proceed. Do you \
wish to continue?
INFO_UPGRADE_ABORTED_BY_USER_1815=The upgrade has been canceled
ERR_UPGRADE_UNKNOWN_OC_ATT_1816=No %s with OID %s exists in \
the schema
ERR_UPGRADE_CONFIG_ERROR_UPGRADE_FOLDER_1817=An error occurred when \
trying to upgrade the config/upgrade folder: %s
INFO_UPGRADE_REQUIREMENTS_1818=Preparing to upgrade
INFO_UPGRADE_VERSION_IS_NOT_SUPPORTED_1819=This tool cannot be used for \
upgrading versions of OpenDJ which are older than '%s'. Please upgrade to \
'%s' first before attempting further upgrades
INFO_LICENSE_CLI_ACCEPT_INVALID_RESPONSE_1820=Invalid response
INFO_LICENSE_DETAILS_CLI_LABEL_1821=Please read the License Agreement above.%n\
 You must accept the terms of the agreement before continuing with the \
 installation
INFO_LICENSE_ACCEPT_1822=Do you accept the License Agreement?
INFO_ERROR_COPYING_FILE_1823=An error occurred while copying the file '%s' to '%s'
INFO_ERROR_DELETING_DIRECTORY_1824=An error occurred while deleting directory '%s'. \
 Check that you have the rights to delete this directory and that there is no other \
 application using it
INFO_ERROR_DELETING_FILE_1825=An error occurred while deleting file '%s'. Check \
that you have the rights to delete this file and that there is no other application using it
INFO_ERROR_RENAMING_FILE_1826=An error occurred while renaming file '%s' to '%s'
ERR_UPGRADE_FAILS_1827=The upgrade failed because %d errors were \
encountered. Please check log for further details
ERR_UPGRADE_COPYSCHEMA_FAILS_1828=An error occurred while copying \
the schema file '%s': %s
ERR_UPGRADE_ADDATTRIBUTE_FAILS_1829=An error occurred while adding \
one or more attributes to the schema file '%s': %s
ERR_UPGRADE_ADDOBJECTCLASS_FAILS_1830=An error occurred while adding \
one or more object classes to the schema file '%s': %s
INFO_UPGRADE_GENERAL_SEE_FOR_DETAILS_1831=See '%s' for a detailed log of this operation
INFO_UPGRADE_TASK_REPLACE_SCHEMA_FILE_1832=Replacing schema file '%s'
INFO_UPGRADE_TASK_REFRESH_UPGRADE_DIRECTORY_1833=Archiving concatenated schema
INFO_UPGRADE_TASK_ADD_CONFIG_FILE_1834=Adding '%s' configuration file
ERR_UPGRADE_ADD_CONFIG_FILE_FAILS_1835=An error occurred while adding \
configuration file '%s': %s
INFO_OPTION_ACCEPT_LICENSE_1836=Automatically accepts the product license \
(if present)
ERR_UPGRADE_RENAME_SNMP_SECURITY_CONFIG_FILE_1838=An error occurred when \
trying to rename the SNMP security config file: %s
INFO_UPGRADE_REBUILD_INDEX_STARTS_1839=Rebuilding index(es) %s
INFO_UPGRADE_REBUILD_INDEX_ENDS_1840=Rebuild index task ends
INFO_UPGRADE_PERFORMING_POST_TASKS_1841=Performing post upgrade tasks
INFO_UPGRADE_POST_TASKS_COMPLETE_1842=Post upgrade tasks complete
ERR_UPGRADE_PERFORMING_POST_TASKS_FAIL_1843=An error occurred during post \
upgrade task. Process aborted. Please check log for further details
INFO_UPGRADE_REBUILD_INDEX_DECLINED_1844 =You have to rebuild the '%s' index \
manually to get a fully functional server
INFO_UPGRADE_ALL_REBUILD_INDEX_DECLINED_1845=You have to rebuild all indexes \
manually to get a fully functional server
ERR_UPGRADE_INVALID_LOG_FILE_1846=Invalid log file %s
INFO_UPGRADE_REBUILD_INDEX_ARGUMENTS_1847=The rebuild index tool arguments are %s
INFO_UPGRADE_REBUILD_ALL_1848=Rebuilding all indexes
INFO_UPGRADE_PROCESS_END_1849=End of the upgrade process
ERR_UPGRADE_CORRUPTED_TEMPLATE_1850='%s' is missing or empty, it is probably corrupted
INFO_UPGRADE_REBUILD_INDEX_NO_BACKEND_FOUND_1851=No backend found. The rebuild index task \
stops
INFO_UPGRADE_CLASSES_FOLDER_RENAMED_1852=The classes folder has been renamed to \
'%s' to avoid compatibility issues
ERR_UPGRADE_DSJAVAPROPERTIES_FAILED_1853=The dsjavaproperties tool failed to run. \
Please rerun dsjavaproperties manually

# Upgrade tasks
INFO_UPGRADE_TASK_6869_SUMMARY_10000=Fixing de-DE collation matching rule OID
INFO_UPGRADE_TASK_7192_SUMMARY_10001=Updating password policy configurations
INFO_UPGRADE_TASK_7364_SUMMARY_10002=Updating audit log publisher configuration
INFO_UPGRADE_TASK_7748_1_SUMMARY_10003=Adding 'etag' virtual attribute schema
INFO_UPGRADE_TASK_7748_2_SUMMARY_10004=Configuring 'etag' virtual attribute
INFO_UPGRADE_TASK_7834_SUMMARY_10005=Configuring 'ds-pwp-password-expiration-time' virtual attribute
INFO_UPGRADE_TASK_7979_SUMMARY_10006=Updating certificate syntax configuration
INFO_UPGRADE_TASK_8124_SUMMARY_10007=Updating JPEG syntax configuration
INFO_UPGRADE_TASK_8133_SUMMARY_10008=Updating country string syntax configuration
INFO_UPGRADE_TASK_8214_SUMMARY_10009=Modifying filter in 'isMemberOf' virtual attribute configuration
INFO_UPGRADE_TASK_8214_DESCRIPTION_10010=OpenDJ 2.5.0 modified the default configuration of the 'isMemberOf' \
virtual attribute so that it is included with group entries. This was done in order to make it easier \
for users to determine which groups a 'nested' group belongs to
INFO_UPGRADE_TASK_8387_SUMMARY_10011=Updating dictionary password validator configuration
INFO_UPGRADE_TASK_8389_SUMMARY_10012=Updating attribute value password validator configuration
INFO_UPGRADE_TASK_8487_SUMMARY_10013=Adding PBKDF2 password storage scheme configuration
INFO_UPGRADE_TASK_8613_SUMMARY_10014=Adding HTTP connection handler configuration
INFO_UPGRADE_TASK_8832_SUMMARY_10015=Adding file-based HTTP access logger
INFO_UPGRADE_TASK_7466_SUMMARY_10016=Rename SNMP security config file
INFO_UPGRADE_TASK_8985_1_SUMMARY_10017=Adding 'emailAddress' attribute
INFO_UPGRADE_TASK_8985_2_SUMMARY_10018=Updating subject attribute to user attribute configuration
INFO_UPGRADE_TASK_9013_DESCRIPTION_10019=OpenDJ 2.5.0-Xpress1 introduced a \
 regression in the ds-sync-hist ordering index. This index has to be rebuilt and this could take a long time \
 to proceed. Do you want to launch this process automatically at the end of the upgrade?
ERR_TASK_TOOL_LDAP_ERROR_10020=ERROR:  The server rejected the task for the following reason: %s
INFO_UPGRADE_TASK_10133_1_SUMMARY_10021=Changing matching rule for 'userCertificate' and \
'caCertificate' to CertificateExactMatch
INFO_UPGRADE_TASK_10133_2_SUMMARY_10022=Configuring 'CertificateExactMatch' matching rule
INFO_UPGRADE_TASK_10214_SUMMARY_10023=Updating ds-cfg-java-class attribute in File-Based Debug Logger
INFO_UPGRADE_TASK_10232_SUMMARY_10024=Deleting ds-cfg-default-debug-level attribute in File-Based Debug Logger
INFO_UPGRADE_TASK_10329_SUMMARY_10025=Updating ds-cfg-default-severity attribute in File-Based Error Logger
INFO_UPGRADE_TASK_10339_SUMMARY_10026=Updating ds-cfg-override-severity attribute in Replication Repair Logger
INFO_UPGRADE_TASK_10733_1_SUMMARY_10027=Removing 'dc=replicationchanges' backend
INFO_UPGRADE_TASK_10733_2_SUMMARY_10028=Removing ACI for 'dc=replicationchanges'
INFO_UPGRADE_TASK_10820_SUMMARY_10029=Adding default privilege 'changelog-read' to all root DNs
INFO_UPGRADE_TASK_10908_SUMMARY_10030=Adding PKCS5S2 password storage scheme configuration
INFO_UPGRADE_TASK_11237_1_SUMMARY_10031=Removing config for 'Network Groups'
INFO_UPGRADE_TASK_11237_2_SUMMARY_10032=Removing config for 'Workflows'
INFO_UPGRADE_TASK_11237_3_SUMMARY_10033=Removing config for 'Workflow Elements'
INFO_UPGRADE_TASK_11239_SUMMARY_10034=Removing config for 'Network Group Plugin'
INFO_UPGRADE_TASK_11260_SUMMARY_10035=OpenDJ 3.0.0 changed the matching rule implementations. \
 All indexes have to be rebuilt. This could take a long time to proceed. \
 Do you want to launch this process automatically at the end of the upgrade?
INFO_UPGRADE_TASK_11339_SUMMARY_10036=Removing config for 'Extensions'
INFO_UPGRADE_TASK_11476_SUMMARY_10037=Removing config for 'File System Entry Cache'
INFO_UPGRADE_TASK_12226_SUMMARY_10038=Removing config for 'Entry Cache Preload'
INFO_UPGRADE_TASK_9206_SUMMARY_10039=Rerunning dsjavaproperties

# Strings for generated reference documentation.
REF_SHORT_DESC_BACKUP_15000=back up OpenDJ directory data
REF_SHORT_DESC_BASE64_15001=encode and decode base64 strings
REF_SHORT_DESC_CONTROL_PANEL_15002=start the OpenDJ graphical admin interface
REF_SHORT_DESC_CREATE_RC_SCRIPT_15003=script to manage OpenDJ as a service on UNIX
REF_SHORT_DESC_DBTEST_15004=gather OpenDJ backend database debugging information
REF_SHORT_DESC_DSJAVAPROPERTIES_15005=apply OpenDJ Java home and JVM settings
REF_SHORT_DESC_DSREPLICATION_15006=manage OpenDJ directory data replication
REF_SHORT_DESC_ENCODE_PASSWORD_15007=encode a password with an OpenDJ storage scheme
REF_SHORT_DESC_EXPORT_LDIF_15008=export OpenDJ directory data in LDIF
REF_SHORT_DESC_IMPORT_LDIF_15009=import OpenDJ directory data from LDIF
REF_SHORT_DESC_LDAPCOMPARE_15010=perform LDAP compare operations
REF_SHORT_DESC_LDAPDELETE_15011=perform LDAP delete operations
REF_SHORT_DESC_LDAPMODIFY_15012=perform LDAP modify, add, delete, mod DN operations
REF_SHORT_DESC_LDAPPASSWORDMODIFY_15013=perform LDAP password modifications
REF_SHORT_DESC_LDAPSEARCH_15014=perform LDAP search operations
REF_SHORT_DESC_LDIFDIFF_15015=compare small LDIF files
REF_SHORT_DESC_LDIFMODIFY_15016=apply LDIF changes to LDIF
REF_SHORT_DESC_LDIFSEARCH_15017=search LDIF with LDAP filters
REF_SHORT_DESC_LIST_BACKENDS_15018=list OpenDJ backends and base DNs
REF_SHORT_DESC_MAKELDIF_15019=generate test LDIF
REF_SHORT_DESC_MANAGE_ACCOUNT_15020=manage state of OpenDJ server accounts
REF_SHORT_DESC_MANAGE_TASKS_15021=manage OpenDJ server administration tasks
REF_SHORT_DESC_REBUILD_INDEX_15022=rebuild index after configuration change
REF_SHORT_DESC_RESTORE_15023=restore OpenDJ directory data backups
REF_SHORT_DESC_SETUP_15024=install OpenDJ directory server
REF_SHORT_DESC_START_DS_15025=start OpenDJ directory server
REF_SHORT_DESC_STATUS_15026=display basic OpenDJ server information
REF_SHORT_DESC_STOP_DS_15027=stop OpenDJ directory server
REF_SHORT_DESC_UPGRADE_15028=upgrade OpenDJ configuration and application data
REF_SHORT_DESC_VERIFY_INDEX_15029=check index for consistency or errors
REF_SHORT_DESC_WINDOWS_SERVICE_15030=register OpenDJ as a Windows Service
UPGRADE_TASK_DELETE_FILE_10035=Removing file '%s'

# Supplements to descriptions for generated reference documentation.
SUPPLEMENT_DESCRIPTION_DBTEST_SUBCMD_LIST_INDEX_STATUS_20001=\
  <xinclude:include href="variablelist-dbtest-index-status.xml" />
SUPPLEMENT_DESCRIPTION_PSEARCH_INFO_20002=<xinclude:include href="description-psearch-info.xml" />
SUPPLEMENT_DESCRIPTION_CONTROLS_20003=<xinclude:include href="variablelist-ldap-controls.xml" />
SUPPLEMENT_DESCRIPTION_UPGRADE_CLI_20004=<xinclude:include href="description-upgrade.xml" />
INFO_ARGUMENT_DESCRIPTION_TESTONLY_20005=Just verify that the JVM can be \
 started properly
INFO_INSTALLDS_BACKEND_TYPE_PLACEHOLDER_20006={backendType}
INFO_INSTALLDS_DESCRIPTION_BACKEND_TYPE_20007=The type of the userRoot backend
INFO_INSTALLDS_PROMPT_BACKEND_TYPE_20008=Provide the backend type:
ERR_INSTALLDS_NO_SUCH_BACKEND_TYPE_20009=The backend type '%s' is not recognized. \
 The supported backend types are %s.
ERR_CONFIGDS_BACKEND_TYPE_UNKNOWN_20010=The backend type '%s' is not recognized. \
 The supported backend types are %s.
ERR_CONFIGDS_SET_BACKEND_TYPE_20011=An error occured while trying to create userRoot \
 backend type %s. Error message: %s
ERR_DBTEST_NOT_JE_BACKEND_20012=%s is not a JE backend. Only JE backends are supported \
 by this version of the tool
ERR_INSTANCE_NOT_CONFIGURED_20013=The local instance is not configured or you do not \
 have permissions to access it.
ERR_SEARCH_INVALID_DEREFERENCE_POLICY_20014=Invalid deref alias specified: %s
ERR_FILE_NOT_FULLY_READABLE_20015=Could not completely read file '%s'
