# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License, Version 1.0 only
# (the "License").  You may not use this file except in compliance
# with the License.
#
# You can obtain a copy of the license at legal-notices/CDDLv1_0.txt
# or http://forgerock.org/license/CDDLv1.0.html.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at legal-notices/CDDLv1_0.txt.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information:
#      Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#      Copyright 2006-2009 Sun Microsystems, Inc.
#      Portions Copyright 2011-2015 ForgeRock AS.



#
# Global directives
#
#global.category=UTIL
#global.use.message.jar.if.webstart=true

#
# Format string definitions
#
# Keys must be formatted as follows:
#
# [SEVERITY]_[DESCRIPTION]_[ORDINAL]
#
# where:
#
# SEVERITY is one of:
# [ERR, WARN, NOTICE, INFO, DEBUG]
#
# DESCRIPTION is an upper case string providing a hint as to the context of
# the message in upper case with the underscore ('_') character serving as
# word separator
#
# ORDINAL is an integer unique among other ordinals in this file
#
ERR_BASE64_DECODE_INVALID_LENGTH_1=The value %s cannot be base64-decoded \
 because it does not have a length that is a multiple of four bytes
ERR_BASE64_DECODE_INVALID_CHARACTER_2=The value %s cannot be \
 base64-decoded because it contains an illegal character %c that is not \
 allowed in base64-encoded values
ERR_HEX_DECODE_INVALID_LENGTH_3=The value %s cannot be decoded as a \
 hexadecimal string because it does not have a length that is a multiple of \
 two bytes
ERR_HEX_DECODE_INVALID_CHARACTER_4=The value %s cannot be decoded as a \
 hexadecimal string because it contains an illegal character %c that is not a \
 valid hexadecimal digit
ERR_LDIF_INVALID_LEADING_SPACE_5=Unable to parse line %d ("%s") from the \
 LDIF source because the line started with a space but there were no previous \
 lines in the entry to which this line could be appended
ERR_LDIF_NO_ATTR_NAME_6=Unable to parse LDIF entry starting at line %d \
 because the line "%s" does not include an attribute name
ERR_LDIF_NO_DN_7=Unable to parse LDIF entry starting at line %d because \
 the first line does not contain a DN (the first line was "%s"
ERR_LDIF_INVALID_DN_9=Unable to parse LDIF entry starting at line %d \
 because an error occurred while trying to parse the value of line "%s" as a \
 distinguished name: %s
ERR_LDIF_COULD_NOT_BASE64_DECODE_DN_11=Unable to parse LDIF entry \
 starting at line %d because it was not possible to base64-decode the DN on \
 line "%s": %s
ERR_LDIF_COULD_NOT_BASE64_DECODE_ATTR_12=Unable to parse LDIF entry %s \
 starting at line %d because it was not possible to base64-decode the \
 attribute on line "%s": %s
WARN_LDIF_DUPLICATE_OBJECTCLASS_13=Entry %s read from LDIF starting at \
 line %d includes a duplicate objectclass value %s. The second occurrence of \
 that objectclass has been skipped
WARN_LDIF_DUPLICATE_ATTR_14=Entry %s read from LDIF starting at line %d \
 includes a duplicate attribute %s with value %s. The second occurrence of \
 that attribute value has been skipped
ERR_LDIF_MULTIPLE_VALUES_FOR_SINGLE_VALUED_ATTR_15=Entry %s starting at \
 line %d includes multiple values for single-valued attribute %s
ERR_LDIF_SCHEMA_VIOLATION_17=Entry %s read from LDIF starting at line %d \
 is not valid because it violates the server's schema configuration: %s
ERR_LDIF_FILE_EXISTS_18=The specified LDIF file %s already exists and \
 the export configuration indicates that no attempt should be made to append \
 to or replace the file
ERR_LDIF_INVALID_URL_19=Unable to parse LDIF entry %s starting at line \
 %d because the value of attribute %s was to be read from a URL but the URL \
 was invalid: %s
ERR_LDIF_URL_IO_ERROR_20=Unable to parse LDIF entry %s starting at line \
 %d because the value of attribute %s was to be read from URL %s but an error \
 occurred while trying to read that content: %s
ERR_REJECT_FILE_EXISTS_21=The specified reject file %s already exists \
 and the import configuration indicates that no attempt should be made to \
 append to or replace the file
ERR_LDIF_COULD_NOT_EVALUATE_FILTERS_FOR_IMPORT_22=An error occurred \
 while attempting to determine whether LDIF entry "%s" starting at line %d \
 should be imported as a result of the include and exclude filter \
 configuration: %s
ERR_LDIF_COULD_NOT_EVALUATE_FILTERS_FOR_EXPORT_23=An error occurred \
 while attempting to determine whether LDIF entry "%s" should be exported as a \
 result of the include and exclude filter configuration: %s
ERR_LDIF_INVALID_DELETE_ATTRIBUTES_24=Error in the LDIF change record \
 entry. Invalid attributes specified for the delete operation
ERR_LDIF_NO_MOD_DN_ATTRIBUTES_25=Error in the LDIF change record \
 entry. No attributes specified for the mod DN operation
ERR_LDIF_NO_DELETE_OLDRDN_ATTRIBUTE_26=Error in the LDIF change record \
 entry. No delete old RDN attribute specified for the mod DN operation
ERR_LDIF_INVALID_DELETE_OLDRDN_ATTRIBUTE_27=Error in the LDIF change \
 record entry. Invalid value "%s" for the delete old RDN attribute specified \
 for the mod DN operation
ERR_LDIF_INVALID_CHANGERECORD_ATTRIBUTE_28=Error in the LDIF change \
 record entry. Invalid attribute "%s" specified. Expecting attribute "%s"
ERR_LDIF_INVALID_MODIFY_ATTRIBUTE_29=Error in the LDIF change record \
 entry. Invalid attribute "%s" specified. Expecting one of the following \
 attributes "%s"
ERR_LDIF_INVALID_CHANGETYPE_ATTRIBUTE_30=Error in the LDIF change \
 record entry. Invalid value "%s" for the changetype specified. Expecting one \
 of the following values "%s"
ERR_SCHEMANAME_EMPTY_VALUE_32=The provided value could not be parsed \
 to determine whether it contained a valid schema element name or OID because \
 it was null or empty
ERR_SCHEMANAME_ILLEGAL_CHAR_33=The provided value "%s" does not \
 contain a valid schema element name or OID because it contains an illegal \
 character %c at position %d
ERR_SCHEMANAME_CONSECUTIVE_PERIODS_34=The provided value "%s" does not \
 contain a valid schema element name or OID because the numeric OID contains \
 two consecutive periods at position %d
ERR_ARG_NO_IDENTIFIER_35=The %s argument does not have either a \
 single-character or a long identifier that may be used to specify it. At \
 least one of these must be specified for each argument
ERR_ARG_NO_VALUE_PLACEHOLDER_36=The %s argument is configured to take \
 a value but no value placeholder has been defined for it
ERR_ARG_NO_INT_VALUE_37=The %s argument does not have any value that \
 may be retrieved as an integer
ERR_ARG_CANNOT_DECODE_AS_INT_38=The provided value "%s" for the %s \
 argument cannot be decoded as an integer
ERR_ARG_INT_MULTIPLE_VALUES_39=The %s argument has multiple values and \
 therefore cannot be decoded as a single integer value
ERR_ARG_NO_BOOLEAN_VALUE_40=The %s argument does not have any value \
 that may be retrieved as a Boolean
ERR_ARG_CANNOT_DECODE_AS_BOOLEAN_41=The provided value "%s" for the %s \
 argument cannot be decoded as a Boolean
ERR_ARG_BOOLEAN_MULTIPLE_VALUES_42=The %s argument has multiple values \
 and therefore cannot be decoded as a single Boolean value
ERR_INTARG_LOWER_BOUND_ABOVE_UPPER_BOUND_43=The %s argument \
 configuration is invalid because the lower bound of %d is greater than the \
 upper bound of %d
ERR_INTARG_VALUE_BELOW_LOWER_BOUND_44=The provided %s value %d is \
 unacceptable because it is below the lower bound of %d
ERR_INTARG_VALUE_ABOVE_UPPER_BOUND_45=The provided %s value %d is \
 unacceptable because it is above the upper bound of %d
ERR_BOOLEANARG_NO_VALUE_ALLOWED_46=The provided %s value is \
 unacceptable because Boolean arguments are never allowed to have values
ERR_MCARG_VALUE_NOT_ALLOWED_47=The provided %s value %s is \
 unacceptable because it is not included in the set of allowed values for that \
 argument
ERR_FILEARG_NO_SUCH_FILE_48=The file %s specified for argument %s does \
 not exist
ERR_FILEARG_CANNOT_VERIFY_FILE_EXISTENCE_49=An error occurred while \
 trying to verify the existence of file %s specified for argument %s: %s
ERR_FILEARG_CANNOT_OPEN_FILE_50=An error occurred while trying to open \
 file %s specified for argument %s for reading: %s
ERR_FILEARG_CANNOT_READ_FILE_51=An error occurred while trying to read \
 from file %s specified for argument %s: %s
ERR_FILEARG_EMPTY_FILE_52=The file %s specified for argument %s exists \
 but is empty
ERR_ARGPARSER_DUPLICATE_SHORT_ID_53=Cannot add argument %s to the \
 argument list because its short identifier -%s conflicts with the %s argument \
 that has already been defined
ERR_ARGPARSER_DUPLICATE_LONG_ID_54=Cannot add argument %s to the \
 argument list because its long identifier --%s conflicts with the %s argument \
 that has already been defined
ERR_ARGPARSER_CANNOT_READ_PROPERTIES_FILE_55=An error occurred while \
 attempting to read the contents of the argument properties file %s: %s
ERR_ARGPARSER_TOO_MANY_TRAILING_ARGS_56=The provided set of \
 command-line arguments contained too many unnamed trailing arguments. The \
 maximum number of allowed trailing arguments is %d
ERR_ARGPARSER_LONG_ARG_WITHOUT_NAME_57=The provided argument "%s" is \
 invalid because it does not include the argument name
ERR_ARGPARSER_NO_ARGUMENT_WITH_LONG_ID_58=Argument --%s is not allowed \
 for use with this program
ERR_ARGPARSER_NO_VALUE_FOR_ARGUMENT_WITH_LONG_ID_59=Argument --%s \
 requires a value but none was provided
ERR_ARGPARSER_VALUE_UNACCEPTABLE_FOR_LONG_ID_60=The provided value \
 "%s" for argument --%s is not acceptable: %s
ERR_ARGPARSER_NOT_MULTIVALUED_FOR_LONG_ID_61=The argument --%s was \
 included multiple times in the provided set of arguments but it does not \
 allow multiple values
ERR_ARGPARSER_ARG_FOR_LONG_ID_DOESNT_TAKE_VALUE_62=A value was \
 provided for argument --%s but that argument does not take a value
ERR_ARGPARSER_INVALID_DASH_AS_ARGUMENT_63=The dash character by itself \
 is invalid for use as an argument name
ERR_ARGPARSER_NO_ARGUMENT_WITH_SHORT_ID_64=Argument -%s is not allowed \
 for use with this program
ERR_ARGPARSER_NO_VALUE_FOR_ARGUMENT_WITH_SHORT_ID_65=Argument -%s \
 requires a value but none was provided
ERR_ARGPARSER_VALUE_UNACCEPTABLE_FOR_SHORT_ID_66=The provided value \
 "%s" for argument -%s is not acceptable: %s
ERR_ARGPARSER_NOT_MULTIVALUED_FOR_SHORT_ID_67=The argument -%s was \
 included multiple times in the provided set of arguments but it does not \
 allow multiple values
ERR_ARGPARSER_CANT_MIX_ARGS_WITH_VALUES_68=The provided argument block \
 '-%s%s' is illegal because the '%s' argument requires a value but is in the \
 same block as at least one other argument that doesn't require a value
ERR_ARGPARSER_DISALLOWED_TRAILING_ARGUMENT_69=Argument "%s" does not \
 start with one or two dashes and unnamed trailing arguments are not allowed
ERR_ARGPARSER_TOO_FEW_TRAILING_ARGUMENTS_70=At least %d unnamed \
 trailing arguments are required in the argument list, but too few were \
 provided
ERR_ARGPARSER_NO_VALUE_FOR_REQUIRED_ARG_71=The argument %s is required \
 to have a value but none was provided in the argument list and no default \
 value is available
ERR_MOVEFILE_NO_SUCH_FILE_72=The file to move %s does not exist
ERR_MOVEFILE_NOT_FILE_73=The file to move %s exists but is not a file
ERR_MOVEFILE_NO_SUCH_DIRECTORY_74=The target directory %s does not \
 exist
ERR_MOVEFILE_NOT_DIRECTORY_75=The target directory %s exists but is \
 not a directory
ERR_EMAILMSG_INVALID_SENDER_ADDRESS_76=The provided sender address %s \
 is invalid: %s
ERR_EMAILMSG_INVALID_RECIPIENT_ADDRESS_77=The provided recipient \
 address %s is invalid: %s
ERR_EMAILMSG_CANNOT_SEND_78=The specified e-mail message could not be \
 sent using any of the configured mail servers
ERR_ARG_SUBCOMMAND_DUPLICATE_SUBCOMMAND_79=The argument parser already \
 has a %s subcommand
ERR_ARG_SUBCOMMAND_DUPLICATE_ARGUMENT_NAME_80=There are multiple \
 arguments for subcommand %s with name %s
ERR_ARG_SUBCOMMAND_ARGUMENT_GLOBAL_CONFLICT_81=Argument %s for \
 subcommand %s conflicts with a global argument with the same name
ERR_ARG_SUBCOMMAND_DUPLICATE_SHORT_ID_82=Argument %s for subcommand %s \
 has a short identifier -%s that conflicts with that of argument %s
ERR_ARG_SUBCOMMAND_ARGUMENT_SHORT_ID_GLOBAL_CONFLICT_83=Argument %s \
 for subcommand %s has a short ID -%s that conflicts with that of global \
 argument %s
ERR_ARG_SUBCOMMAND_DUPLICATE_LONG_ID_84=Argument %s for subcommand %s \
 has a long identifier --%s that conflicts with that of argument %s
ERR_ARG_SUBCOMMAND_ARGUMENT_LONG_ID_GLOBAL_CONFLICT_85=Argument %s for \
 subcommand %s has a long ID --%s that conflicts with that of global argument \
 %s
ERR_SUBCMDPARSER_DUPLICATE_GLOBAL_ARG_NAME_86=There is already another \
 global argument named "%s"
ERR_SUBCMDPARSER_GLOBAL_ARG_NAME_SUBCMD_CONFLICT_87=The argument name \
 %s conflicts with the name of another argument associated with the %s \
 subcommand
ERR_SUBCMDPARSER_DUPLICATE_GLOBAL_ARG_SHORT_ID_88=Short ID -%s for \
 global argument %s conflicts with the short ID of another global argument %s
ERR_SUBCMDPARSER_GLOBAL_ARG_SHORT_ID_CONFLICT_89=Short ID -%s for \
 global argument %s conflicts with the short ID for the %s argument associated \
 with subcommand %s
ERR_SUBCMDPARSER_DUPLICATE_GLOBAL_ARG_LONG_ID_90=Long ID --%s for \
 global argument %s conflicts with the long ID of another global argument %s
ERR_SUBCMDPARSER_GLOBAL_ARG_LONG_ID_CONFLICT_91=Long ID --%s for \
 global argument %s conflicts with the long ID for the %s argument associated \
 with subcommand %s
ERR_SUBCMDPARSER_CANNOT_READ_PROPERTIES_FILE_92=An error occurred \
 while attempting to read the contents of the argument properties file %s: %s
ERR_SUBCMDPARSER_LONG_ARG_WITHOUT_NAME_93=The provided command-line \
 argument %s does not contain an argument name
ERR_SUBCMDPARSER_NO_GLOBAL_ARGUMENT_FOR_LONG_ID_94=The provided \
 argument --%s is not a valid global argument identifier
ERR_SUBCMDPARSER_NO_ARGUMENT_FOR_LONG_ID_95=The provided argument --%s \
 is not a valid global or subcommand argument identifier
ERR_SUBCMDPARSER_NO_VALUE_FOR_ARGUMENT_WITH_LONG_ID_96=Command-line \
 argument --%s requires a value but none was given
ERR_SUBCMDPARSER_VALUE_UNACCEPTABLE_FOR_LONG_ID_97=The provided value \
 "%s" for argument --%s is not acceptable: %s
ERR_SUBCMDPARSER_NOT_MULTIVALUED_FOR_LONG_ID_98=The argument --%s was \
 included multiple times in the provided set of arguments but it does not \
 allow multiple values
ERR_SUBCMDPARSER_ARG_FOR_LONG_ID_DOESNT_TAKE_VALUE_99=A value was \
 provided for argument --%s but that argument does not take a value
ERR_SUBCMDPARSER_INVALID_DASH_AS_ARGUMENT_100=The dash character by \
 itself is invalid for use as an argument name
ERR_SUBCMDPARSER_NO_GLOBAL_ARGUMENT_FOR_SHORT_ID_101=The provided \
 argument -%s is not a valid global argument identifier
ERR_SUBCMDPARSER_NO_ARGUMENT_FOR_SHORT_ID_102=The provided argument \
 -%s is not a valid global or subcommand argument identifier
ERR_SUBCMDPARSER_NO_VALUE_FOR_ARGUMENT_WITH_SHORT_ID_103=Argument -%s \
 requires a value but none was provided
ERR_SUBCMDPARSER_VALUE_UNACCEPTABLE_FOR_SHORT_ID_104=The provided \
 value "%s" for argument -%s is not acceptable: %s
ERR_SUBCMDPARSER_NOT_MULTIVALUED_FOR_SHORT_ID_105=The argument -%s was \
 included multiple times in the provided set of arguments but it does not \
 allow multiple values
ERR_SUBCMDPARSER_CANT_MIX_ARGS_WITH_VALUES_106=The provided argument \
 block '-%s%s' is illegal because the '%s' argument requires a value but is in \
 the same block as at least one other argument that doesn't require a value
ERR_SUBCMDPARSER_INVALID_ARGUMENT_107=The provided argument "%s" is \
 not recognized
ERR_SUBCMDPARSER_NO_VALUE_FOR_REQUIRED_ARG_109=The argument %s is \
 required to have a value but none was provided in the argument list and no \
 default value is available
ERR_LDAPURL_NO_COLON_SLASH_SLASH_110=The provided string "%s" cannot \
 be decoded as an LDAP URL because it does not contain the necessary :// \
 component to separate the scheme from the rest of the URL
ERR_LDAPURL_NO_SCHEME_111=The provided string "%s" cannot be decoded \
 as an LDAP URL because it does not contain a protocol scheme
ERR_LDAPURL_NO_HOST_112=The provided string "%s" cannot be decoded as \
 an LDAP URL because it does not contain a host before the colon to specify \
 the port number
ERR_LDAPURL_NO_PORT_113=The provided string "%s" cannot be decoded as \
 an LDAP URL because it does not contain a port number after the colon \
 following the host
ERR_LDAPURL_CANNOT_DECODE_PORT_114=The provided string "%s" cannot be \
 decoded as an LDAP URL because the port number portion %s cannot be decoded \
 as an integer
ERR_LDAPURL_INVALID_PORT_115=The provided string "%s" cannot be \
 decoded as an LDAP URL because the provided port number %d is not within the \
 valid range between 1 and 65535
ERR_LDAPURL_INVALID_SCOPE_STRING_116=The provided string "%s" cannot \
 be decoded as an LDAP URL because the scope string %s was not one of the \
 allowed values of base, one, sub, or subordinate
ERR_LDAPURL_PERCENT_TOO_CLOSE_TO_END_117=The provided URL component \
 "%s" could not be decoded because the percent character at byte %d was not \
 followed by two hexadecimal digits
ERR_LDAPURL_INVALID_HEX_BYTE_118=The provided URL component "%s" could \
 not be decoded because the character at byte %d was not a valid hexadecimal \
 digit
ERR_LDAPURL_CANNOT_CREATE_UTF8_STRING_119=An error occurred while \
 attempting to represent a byte array as a UTF-8 string during the course of \
 decoding a portion of an LDAP URL: %s
ERR_CHARSET_NO_COLON_120=Cannot decode value "%s" as a named character \
 set because it does not contain a colon to separate the name from the set of \
 characters
ERR_CHARSET_CONSTRUCTOR_NO_NAME_121=The named character set is invalid \
 because it does not contain a name
ERR_CHARSET_CONSTRUCTOR_INVALID_NAME_CHAR_122=The named character set is \
 invalid because the provide name "%s" has an invalid character at position \
 %d. Only ASCII alphabetic characters are allowed in the name
ERR_CHARSET_NO_NAME_123=Cannot decode value "%s" as a named character \
 set because it does not contain a name to use for the character set
ERR_CHARSET_NO_CHARS_124=Cannot decode value "%s" as a named character \
 set because there are no characters to include in the set
INFO_TIME_IN_SECONDS_125=%d seconds
INFO_TIME_IN_MINUTES_SECONDS_126=%d minutes, %d seconds
INFO_TIME_IN_HOURS_MINUTES_SECONDS_127=%d hours, %d minutes, %d seconds
INFO_TIME_IN_DAYS_HOURS_MINUTES_SECONDS_128=%d days, %d hours, %d minutes, %d \
 seconds
ERR_FILEPERM_SET_NO_SUCH_FILE_141=Unable to set permissions for file %s \
 because it does not exist
ERR_FILEPERM_SET_JAVA_EXCEPTION_143=One or more exceptions were thrown \
 in the process of updating the file permissions for %s. Some of the \
 permissions for the file may have been altered
ERR_FILEPERM_SET_JAVA_FAILED_ALTERED_144=One or more updates to the \
 file permissions for %s failed, but at least one update was successful. Some \
 of the permissions for the file may have been altered
ERR_FILEPERM_SET_JAVA_FAILED_UNALTERED_145=All of the attempts to \
 update the file permissions for %s failed. The file should be left with its \
 original permissions
ERR_FILEPERM_INVALID_UNIX_MODE_STRING_146=The provided string %s does \
 not represent a valid UNIX file mode. UNIX file modes must be a \
 three-character string in which each character is a numeric digit between \
 zero and seven
ERR_EXEC_DISABLED_147=The %s command will not be allowed because the \
 Directory Server has been configured to refuse the use of the exec method
INFO_GLOBAL_OPTIONS_149=Global Options:
INFO_GLOBAL_OPTIONS_REFERENCE_150=See "%s --help"
INFO_SUBCMD_OPTIONS_151=SubCommand Options:
INFO_ARGPARSER_USAGE_152=Usage:
INFO_SUBCMDPARSER_SUBCMD_HEADING_153=Available subcommands:
INFO_SUBCMDPARSER_GLOBAL_HEADING_155=The global options are:
INFO_GLOBAL_HELP_REFERENCE_156=See "%s --help" to get more usage help
ERR_RENAMEFILE_CANNOT_RENAME_157=Failed to rename file %s to %s
ERR_RENAMEFILE_CANNOT_DELETE_TARGET_158=Failed to delete target file \
 %s. Make sure the file is not currently in use by this or another \
 application
ERR_EXPCHECK_TRUSTMGR_CLIENT_CERT_EXPIRED_159=Refusing to trust client \
 or issuer certificate '%s' because it expired on %s
ERR_EXPCHECK_TRUSTMGR_CLIENT_CERT_NOT_YET_VALID_160=Refusing to trust \
 client or issuer certificate '%s' because it is not valid until %s
ERR_EXPCHECK_TRUSTMGR_SERVER_CERT_EXPIRED_161=Refusing to trust server \
 or issuer certificate '%s' because it expired on %s
ERR_EXPCHECK_TRUSTMGR_SERVER_CERT_NOT_YET_VALID_162=Refusing to trust \
 server or issuer certificate '%s' because it is not valid until %s
WARN_LDIF_VALUE_VIOLATES_SYNTAX_163=Entry %s read from LDIF starting at \
 line %d includes value "%s" for attribute %s that is invalid according to the \
 associated syntax: %s
ERR_SKIP_FILE_EXISTS_164=The specified skip file %s already exists and \
 the import configuration indicates that no attempt should be made to append \
 to or replace the file
ERR_LDIF_SKIP_165=Skipping entry %s because the DN is not one that \
 should be included based on the include and exclude branches
INFO_SUBCMDPARSER_SUBCMD_HELP_HEADING_166=To get the list of subcommands use:
ERR_EMBEDUTILS_SERVER_ALREADY_RUNNING_167=The Directory Server cannot \
 be started because it is already running
INFO_SUBCMDPARSER_OPTIONS_168={options}
INFO_SUBCMDPARSER_SUBCMD_AND_OPTIONS_169={subcommand} {options}
INFO_SUBCMDPARSER_WHERE_OPTIONS_INCLUDE_170=\        where {options} include:
INFO_EMAIL_TOOL_DESCRIPTION_171=Send an e-mail message via SMTP
INFO_EMAIL_HOST_DESCRIPTION_172=The address of the SMTP server to use to send \
 the message
INFO_EMAIL_FROM_DESCRIPTION_173=The address to use for the message sender
INFO_EMAIL_TO_DESCRIPTION_174=The address to use for the message recipient
INFO_EMAIL_SUBJECT_DESCRIPTION_175=The subject to use for the e-mail message
INFO_EMAIL_BODY_DESCRIPTION_176=The path to the file containing the text for \
 the message body
INFO_EMAIL_ATTACH_DESCRIPTION_177=The path to a file to attach to the e-mail \
 message
INFO_EMAIL_HELP_DESCRIPTION_178=Display this usage information
ERR_EMAIL_NO_SUCH_BODY_FILE_181=The file %s specified as the body file \
 for the e-mail message does not exist
ERR_EMAIL_CANNOT_PROCESS_BODY_FILE_182=An error occurred while \
 attempting to process message body file %s: %s
ERR_EMAIL_NO_SUCH_ATTACHMENT_FILE_183=The attachment file %s does not \
 exist
ERR_EMAIL_CANNOT_ATTACH_FILE_184=An error occurred while trying to \
 attach file %s: %s
ERR_EMAIL_CANNOT_SEND_MESSAGE_185=An error occurred while trying to \
 send the e-mail message: %s
INFO_BASE64_TOOL_DESCRIPTION_186=This utility can be used to encode and \
 decode information using base64
INFO_BASE64_HELP_DESCRIPTION_187=Display this usage information
INFO_BASE64_DECODE_DESCRIPTION_188=Decode base64-encoded information into \
 raw data. When no options are specified, \
 this subcommand reads from standard input and writes to standard output
INFO_BASE64_ENCODE_DESCRIPTION_189=Encode raw data using base64. \
 When no options are specified, this subcommand reads from standard input and \
 writes to standard output
INFO_BASE64_ENCODED_DATA_DESCRIPTION_190=The base64-encoded data to be decoded
INFO_BASE64_ENCODED_FILE_DESCRIPTION_191=The path to a file containing the \
 base64-encoded data to be decoded
INFO_BASE64_RAW_DATA_DESCRIPTION_192=The raw data to be base64 encoded
INFO_BASE64_RAW_FILE_DESCRIPTION_193=The path to a file containing the raw \
 data to be base64 encoded
INFO_BASE64_TO_ENCODED_FILE_DESCRIPTION_194=The path to a file to which the \
 base64-encoded data should be written
INFO_BASE64_TO_RAW_FILE_DESCRIPTION_195=The path to a file to which the raw \
 base64-decoded data should be written
ERR_BASE64_CANNOT_READ_RAW_DATA_196=An error occurred while attempting \
 to read the raw data to encode: %s
ERR_BASE64_CANNOT_WRITE_ENCODED_DATA_197=An error occurred while \
 attempting to write the encoded data: %s
ERR_BASE64_CANNOT_READ_ENCODED_DATA_198=An error occurred while \
 attempting to read the base64-encoded data: %s
ERR_BASE64_CANNOT_WRITE_RAW_DATA_199=An error occurred while \
 attempting to write the decoded data: %s
ERR_BASE64_UNKNOWN_SUBCOMMAND_200=Unknown subcommand %s
INFO_GENERAL_NO_201=no
INFO_GENERAL_YES_202=yes
ERR_CONSOLE_APP_CONFIRM_203=Invalid response. Please enter \
 "%s" or "%s"
INFO_MENU_OPTION_HELP_204=help
INFO_MENU_OPTION_HELP_KEY_205=?
INFO_MENU_OPTION_CANCEL_206=cancel
INFO_MENU_OPTION_CANCEL_KEY_207=c
INFO_MENU_OPTION_QUIT_208=quit
INFO_MENU_OPTION_QUIT_KEY_209=q
INFO_MENU_NUMERIC_OPTION_210=%d)
INFO_MENU_CHAR_OPTION_211=%c)
ERR_MENU_BAD_CHOICE_MULTI_212=Invalid response. Please enter one or \
more valid menu options
ERR_MENU_BAD_CHOICE_SINGLE_213=Invalid response. Please enter a valid \
menu option
ERR_MENU_BAD_CHOICE_MULTI_DUPE_214=The option "%s" was specified \
more than once. Please enter one or more valid menu options
INFO_MENU_PROMPT_SINGLE_215=Enter choice:
INFO_MENU_PROMPT_SINGLE_DEFAULT_216=Enter choice [%s]:
INFO_MENU_PROMPT_MULTI_217=Enter one or more choices separated by commas:
INFO_MENU_PROMPT_MULTI_DEFAULT_218=Enter one or more choices separated by commas [%s]:
INFO_MENU_PROMPT_RETURN_TO_CONTINUE_219=Press RETURN to continue
INFO_MENU_PROMPT_CONFIRM_220=%s (%s / %s) [%s]:
ERR_CONSOLE_INPUT_ERROR_221=The response could not be read from the console due to the following error: %s
INFO_MENU_OPTION_BACK_222=back
INFO_MENU_OPTION_BACK_KEY_223=b
ERR_LDIF_REJECTED_BY_PLUGIN_NOMESSAGE_224=Rejecting entry %s because \
 it was rejected by a plugin
ERR_LDIF_REJECTED_BY_PLUGIN_225=Rejecting entry %s because it was \
 rejected by a plugin: %s
INFO_LDAP_CONN_PROMPT_SECURITY_LDAP_226=LDAP
INFO_LDAP_CONN_PROMPT_SECURITY_USE_SSL_227=LDAP with SSL
INFO_LDAP_CONN_PROMPT_SECURITY_USE_START_TLS_228=LDAP with StartTLS
INFO_LDAP_CONN_PROMPT_SECURITY_USE_TRUST_ALL_229=Automatically trust
INFO_LDAP_CONN_PROMPT_SECURITY_TRUSTSTORE_PATH_230=Truststore path:
INFO_LDAP_CONN_PROMPT_SECURITY_TRUSTSTORE_PASSWORD_231=Password for truststore '%s':
INFO_LDAP_CONN_PROMPT_SECURITY_KEYSTORE_PATH_233=Keystore path:
INFO_LDAP_CONN_PROMPT_SECURITY_KEYSTORE_PASSWORD_234=Password for keystore '%s':
INFO_LDAP_CONN_HEADING_CONNECTION_PARAMETERS_236=>>>> Specify OpenDJ LDAP \
 connection parameters
ERR_LDAP_CONN_BAD_HOST_NAME_237=The hostname "%s" could not be \
 resolved. Please check you have provided the correct address
ERR_LDAP_CONN_BAD_PORT_NUMBER_238=Invalid port number "%s". Please \
 enter a valid port number between 1 and 65535
INFO_LDAP_CONN_PROMPT_HOST_NAME_239=Directory server hostname or IP address [%s]:
INFO_LDAP_CONN_PROMPT_PORT_NUMBER_240=Directory server port number [%d]:
INFO_LDAP_CONN_PROMPT_BIND_DN_241=Administrator user bind DN [%s]:
INFO_LDAP_CONN_PROMPT_SECURITY_USE_SECURE_CTX_242=How do you want to connect?
INFO_LDAP_CONN_PROMPT_SECURITY_PROTOCOL_DEFAULT_CHOICE_243=%d
ERR_LDAP_CONN_PROMPT_SECURITY_INVALID_FILE_PATH_244=The provided path is not valid
INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_METHOD_245=How do you want to trust the server certificate?
INFO_LDAP_CONN_PROMPT_SECURITY_TRUSTSTORE_246=Use a truststore
INFO_LDAP_CONN_PROMPT_SECURITY_MANUAL_CHECK_247=Manually validate
INFO_LDAP_CONN_PROMPT_SECURITY_SERVER_CERTIFICATE_248=Server Certificate:
INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE_249=%s
INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION_250=Do you trust this server certificate?
INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION_NO_251=No
INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION_SESSION_252=Yes, for this session only
INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION_ALWAYS_253=Yes, also add it to a truststore
INFO_LDAP_CONN_PROMPT_SECURITY_CERTIFICATE_DETAILS_254=View certificate details
INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE_USER_DN_255 =User DN  : %s
INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE_VALIDITY_256=Validity : From '%s'%n             To '%s'
INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE_ISSUER_257  =Issuer   : %s
INFO_LDAP_CONN_PROMPT_SECURITY_CERTIFICATE_ALIASES_258=Which certificate do you want to use?
INFO_LDAP_CONN_PROMPT_SECURITY_CERTIFICATE_ALIAS_259=%s (%s)
INFO_PROMPT_SINGLE_DEFAULT_261=%s [%s]:
INFO_LDAP_CONN_PROMPT_ADMINISTRATOR_UID_262=Global Administrator User ID [%s]:
INFO_LDAP_CONN_GLOBAL_ADMINISTRATOR_OR_BINDDN_PROMPT_263=Global Administrator \
 User ID, or bind DN if no Global Administrator is defined [%s]:
INFO_ARGPARSER_USAGE_JAVA_CLASSNAME_264=Usage:  java %s  {options}
INFO_ARGPARSER_USAGE_JAVA_SCRIPTNAME_265=Usage:  %s  {options}
INFO_ARGPARSER_USAGE_TRAILINGARGS_266={trailing-arguments}
ERR_CONFIRMATION_TRIES_LIMIT_REACHED_267=Confirmation tries limit reached (%d)
ERR_UNEXPECTED_268=Unexpected error. Details: %s
ERR_TRIES_LIMIT_REACHED_269=Input tries limit reached (%d)
INFO_ADMIN_CONN_PROMPT_PORT_NUMBER_270=Directory server administration port number [%d]:
ERR_LDIF_INVALID_ATTR_OPTION_271=Unable to parse LDIF entry %s starting \
 at line %d because it has an invalid binary option for attribute %s
ERR_CERTMGR_INVALID_PKCS11_PATH_272=Invalid key store path for PKCS11 \
keystore, it must be %s
ERR_CERTMGR_INVALID_KEYSTORE_PATH_273=Key store path %s exists but is \
not a file
ERR_CERTMGR_INVALID_PARENT_274=Parent directory for key store path \
 %s does not exist or is not a directory
ERR_CERTMGR_INVALID_STORETYPE_275=Invalid key store type, it must \
be one of the following: %s, %s, %s or %s
ERR_CERTMGR_KEYSTORE_NONEXISTANT_276=Keystore does not exist, \
it must exist to retrieve an alias, delete an alias or generate a \
certificate request
ERR_CERTMGR_VALIDITY_277=Validity value %d is invalid, it must \
be a positive integer
ERR_CERTMGR_ALIAS_ALREADY_EXISTS_278= A certificate with the alias \
%s already exists in the key store
ERR_CERTMGR_ADD_CERT_279=The following error occurred when \
adding a certificate with alias %s to the keystore: %s
ERR_CERTMGR_ALIAS_INVALID_280=The alias %s cannot be added to the \
keystore for one of the following reasons: it already exists in the \
keystore, or, it is not an instance of a trusted certificate class
ERR_CERTMGR_CERT_REPLIES_INVALID_281=The alias %s is an instance of \
a private key entry, which is not supported being added to the keystore \
at this time
ERR_CERTMGR_DELETE_ALIAS_282=The following error occurred when \
deleting a certificate with alias %s from the keystore: %s
ERR_CERTMGR_GEN_SELF_SIGNED_CERT_284=The following error occurred when \
generating a self-signed certificate using the alias %s: %s
ERR_CERTMGR_INVALID_CERT_FILE_285=The certificate file %s is \
invalid because it does not exists, or exists, but is not a file
ERR_CERTMGR_ALIAS_CAN_NOT_DELETE_286=The alias %s cannot be \
deleted from the keystore because it does not exist
ERR_CERTMGR_TRUSTED_CERT_292=The trusted certificate associated \
with alias %s could not be added to keystore because of the following \
reason: %s
ERR_CERTMGR_FILE_NAME_INVALID_293=The %s is invalid because it is \
null
ERR_CERTMGR_VALUE_INVALID_294=The argument %s is invalid because it \
is either null, or has zero length
ERR_CERTMGR_CLASS_NOT_FOUND_295=A security class cannot be found \
in this JVM because of the following reason: %s
ERR_CERTMGR_SECURITY_296=The security classes could not be \
initialized because of the following reason: %s
ERR_CERTMGR_NO_METHOD_297=A method needed in the security classes \
could not be located because of the following reason: %s
INFO_ARGPARSER_USAGE_DEFAULT_VALUE_299=Default value: %s
WARN_EXPORT_LDIF_SET_PERMISSION_FAILED_300=An error occurred while \
 setting file permissions for the LDIF file %s: %s
ERR_LDIF_READ_ATTR_SKIP_301=Skipping entry %s because the following error \
was received when reading its attributes: %s
ERR_LDAP_CONN_BAD_INTEGER_302=Invalid integer number "%s". Please \
 enter a valid integer
ERR_ARG_SUBCOMMAND_INVALID_303=Invalid subcommand
WARN_UNABLE_TO_USE_FILESYSTEM_API_304=Unable to gather information on Filesystem APIs, disk monitoring will be verbose
ERR_BACKUP_CANNOT_GET_MAC_305=An error occurred while attempting to \
 obtain the %s MAC provider to create the signed hash for the backup: %s
ERR_BACKUP_CANNOT_GET_DIGEST_306=An error occurred while attempting \
 to obtain the %s message digest to create the hash for the backup: %s
ERR_BACKUP_CANNOT_CREATE_ARCHIVE_FILE_307=An error occurred while \
 trying to create the archive file %s in directory %s for the backup %s: %s
ERR_BACKUP_CANNOT_GET_CIPHER_308=An error occurred while attempting \
 to obtain the cipher to use to encrypt the backup: %s
ERR_BACKUP_ZIP_COMMENT_309=%s backup %s
ERR_BACKUP_CANNOT_LIST_LOG_FILES_310=An error occurred while \
 attempting to obtain a list of the files in directory %s to include in the \
 backup: %s
ERR_BACKUP_CANNOT_WRITE_ARCHIVE_FILE_311=An error occurred while \
 attempting to back up file %s of backup %s: %s
ERR_BACKUP_CANNOT_CLOSE_ZIP_STREAM_312=An error occurred while \
 trying to close the archive file %s in directory %s: %s
ERR_BACKUP_UNSIGNED_HASH_ERROR_313=The computed hash of backup %s \
 is different to the value computed at time of backup
ERR_BACKUP_SIGNED_HASH_ERROR_314=The computed signed hash of backup \
 %s is different to the value computed at time of backup
ERR_CANNOT_RENAME_RESTORE_DIRECTORY_315=The directory %s, \
 containing the files restored from backup, could not be renamed to the \
 directory %s
ERR_BACKUP_CANNOT_UPDATE_BACKUP_DESCRIPTOR_316=An error occurred \
 while attempting to update the backup descriptor file %s with information \
 about the backup: %s
ERR_BACKUP_CANNOT_RESTORE_317=An error occurred while attempting to \
 restore the files from backup %s: %s
NOTE_BACKUP_FILE_UNCHANGED_318=Backup file has not changed: %s
NOTE_BACKUP_VERIFY_FILE_319=Verifying backup file: %s
NOTE_BACKUP_RESTORED_FILE_320=Restored backup file: %s (size %d)
NOTE_BACKUP_ARCHIVED_FILE_321=Archived backup file: %s
ERR_BACKUP_CANNOT_GET_MAC_KEY_ID_323=An error occurred while attempting to \
 obtain the MAC key ID to create the signed hash for the backup %s : %s
ERR_BACKUP_CANNOT_CREATE_DIRECTORY_TO_RESTORE_FILE_324=An error occurred while \
 attempting to create a directory to restore the file %s for backup of %s
ERR_BACKUP_CANNOT_SAVE_FILES_BEFORE_RESTORE_325=An error occurred while \
 attempting to save files from root directory %s to target directory %s, for \
 backup of %s : %s
ERR_BACKUP_CANNOT_CREATE_SAVE_DIRECTORY_326=An error occurred while \
 attempting to create a save directory with base path %s before restore of \
 backup of %s: %s
